Wancle CBG-9000/CBG-9001

Contents

Wancle Conical Burr Coffee Grinder

Models: CBG-9000 (Single Knob Mode) / CBG-9001 (Dual Touch Mode)

Introduction

Thank you for choosing the Wancle Conical Burr Coffee Grinder. This manual provides important information for the safe and efficient use of your appliance. Please read it carefully before first use and retain it for future reference.

Product Features

  • Conical Burr Grinding System: Operates at low speed to minimize heat, preserve coffee oils, and optimize flavor extraction for superior coffee quality.
  • 25 Grinding Settings: Offers precise grind settings, fully adjustable to suit every taste and brewing method—from coarse grinds for French press to fine grinds for espresso.
  • Easy Grinding (Dual Modes): The intuitive LCD touchscreen allows for easy grinding. Choose a precise 60-second electronic timer or a 2–12 cup preset mode. The grinder shuts off automatically once the cycle ends.
  • Residue-Free Design: Equipped with a built-in coffee residue cleaner and external air blower to ensure no leftover grounds ruin the taste of your next cup.
  • Effortless Cleaning: Anti-static technology prevents coffee grounds from clinging. Detachable upper burr, hopper, anti-static coffee grounds bin, and included cleaning brush make maintenance simple.
  • Compact and Lightweight: Designed to save countertop space and facilitate easy storage.

Package Contents

  • Electric Conical Burr Coffee Grinder x 1
  • Cleaning Brush x 1
  • Powder Blower x 1
  • User Manual x 1

Safety Instructions

Please read these safety instructions carefully before using the appliance.

  • Do not use the appliance if it has been dropped or shows visible damage, or if it fails to function normally. In such cases, it must be sent to an approved service center.
  • If the power cable is damaged, it must be replaced by the manufacturer, an approved service center, or a similarly qualified person to avoid danger.
  • Always unplug the appliance when not in use, before assembly, disassembly, or cleaning.
  • This appliance is not intended for use by children. Keep the appliance and its cord out of reach of children.
  • This appliance may be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning safe use and understand the hazards involved.
  • Children shall not play with the appliance.
  • Handle the knife with care during cleaning, as the blades are very sharp.
  • Check that your power supply voltage corresponds to the information on the product label (alternating current only). Incorrect voltage can cause irreversible damage and invalidate the guarantee.
  • The appliance must not be immersed in water or any other liquid.
  • This appliance is intended for indoor, domestic household use only.
  • For safety, only use Wancle accessories and spare parts designed for your appliance.
  • Any misuse could lead to potential injury.

Components Overview

Familiarize yourself with the parts of your coffee grinder:

Diagram of Wancle coffee grinder components

Diagram showing the main components of the Wancle Coffee Grinder.

LabelComponent
ABean hopper
BBean hopper lid
CBody of appliance
DSwitch (ON/OFF)
ERemovable upper mill
FGround coffee holder
GGround coffee holder lid
HNumber of cups selector / Time setting
IGrind setting
JPowder blower

Setup

Before first use, remove all packaging and place the appliance on a dry, level, and stable surface. Ensure your household's mains voltage matches the product label information.

Assembly Steps

  1. Put on the hopper: Line up the arrows on the hopper and the machine. Then twist the hopper to the grind setting you want.
  2. Step 1: Placing the coffee holder in position.

    Image showing how to place the coffee holder.

  3. Add coffee beans and cover: Remove the bean hopper lid, add coffee beans into the bean hopper, and replace the lid, ensuring it is correctly positioned. Just pop the upper cover onto the powder blower.
  4. Step 2: Adding coffee beans to the hopper.

    Image showing how to add coffee beans.

    Step 3: Bean hopper lid correctly positioned.

    Image showing the bean hopper lid in place.

  5. Insert the powder chamber: Drop the coffee powder container into the base.
  6. Align the removable upper mill: Ensure the holder of the removable upper mill is aligned with the arrow on the main body, then put it down to the machine.
  7. Insert the funnel: Insert the funnel with the arrow on the body aligned with the arrow on the main body, then rotate the funnel clockwise to the desired position.

Visual Setup Guide

Video demonstrating the setup and initial use of the Wancle Conical Burr Grinder.

Operating Instructions

  1. Set desired quantity: Adjust the number of cups selector or time setting according to the desired quantity of ground coffee.
  2. Step 4: Adjusting the grind fineness selector.

    Image showing adjustment of grind fineness.

    Dual modes customized grinding touch panel with cup and time settings.

    Close-up of the dual touch panel for cup and time settings.

  3. Set grind fineness: Adjust the grind setting selector to the desired level. On first use, select an intermediate position and then fine-tune to your taste. Do not change the grind setting while the mill is running.
  4. Diagram showing 25 grind settings from fine to coarse for various brewing methods.

    Detailed diagram of 25 grind settings for different brewing methods.

  5. Plug in: Connect the appliance to a power outlet.
  6. Start grinding: Press the ON/OFF switch to start the appliance.
  7. Step 6: Pressing the ON/OFF button to start grinding.

    Image showing how to press the ON/OFF button.

  8. Automatic stop: The appliance will stop automatically once the selected quantity has been milled.
  9. Manual stop: To stop the appliance before the cycle ends, press the ON/OFF switch again.
  10. Clear residual grounds: Attach the powder blower to the bean hopper and press the top to blow out any residual grounds from the grinding system.
  11. Step 7: Using the powder blower to clear residual grounds.

    Image showing the use of the powder blower.

  12. Collect ground coffee: Remove the ground coffee holder, tap the receptacle gently, and pour the ground coffee directly into your coffee maker's filter or use a measuring spoon for an espresso machine.
  13. Step 8: Ground coffee collected in the holder.

    Image showing ground coffee in the collection holder.

  14. Repeat cycle: To obtain additional ground coffee, you can repeat an operating cycle by pressing the ON/OFF switch again.

Maintenance

Proper maintenance ensures the longevity and performance of your coffee grinder.

General Cleaning

  • Always unplug your appliance before cleaning.
  • Never place the body of the appliance, power supply cord, or plug in water or under running water.
  • Do not use detergents or abrasive pads to clean the appliance.
  • Clean the lids and the ground coffee holder in warm, soapy water.
  • Over time, the color of the coffee beans may stain the plastic parts of your appliance; this is normal. These parts can be cleaned by soaking them in mild (non-abrasive) bleach solution straight after use.

Disassembling the Upper Grinding Head

  1. Remove the funnel: Turn the funnel counterclockwise to the end. The arrow on the body should then align with the arrow on the funnel, allowing you to remove the funnel.
  2. Step 9: Turning the funnel counter-clockwise to remove it.

    Image showing how to turn the funnel for removal.

  3. Lift the upper mill: The holder of the removable upper mill is aligned with the arrow on the main body. Lift it upwards.
  4. Step 10: Lifting the removable upper mill.

    Image showing how to lift the upper mill.

  5. Clean the bean hopper: Use a damp cloth to carefully clean the inside of the bean hopper.

Installing the Funnel

  1. Reinsert the upper mill: Return the removable upper mill to the machine. Ensure the holder of the removable upper mill is aligned with the arrow on the main body.
  2. Reinsert and rotate the funnel: Insert the funnel with the arrow on the body aligned with the arrow on the main body, then rotate the funnel clockwise to the desired position.
  3. Clean dispenser and body: Carefully clean the ground coffee dispenser and the body of the appliance using a damp cloth.

Troubleshooting

The appliance does not operate or stops during operation:

  • Check the electrical connection.
  • Ensure the bean hopper is correctly positioned or fitted.
  • The appliance may have switched off automatically due to motor overheating. Allow it to cool for several minutes before restarting.
  • A coffee bean may have jammed the burrs.

The automatic dosing quantity is not to your liking:

  • Doses of coffee are programmable. Refer to the operating instructions for setting the number of cups or time.

Specifications

AttributeValue
ModelCBG-9000/CBG-9001
Power (W)200W
Voltage220V-240V (UK Charger)
Housing MaterialABS
TypeBurr Grinders (Conical)
Number of grinding levels11 or more (25 Grinder Settings)
Loading coffee beansup to 90 gr
Product Weight1.0kg (2.2lb)
Product Dimensions185 x 96 x 237.5 mm (7.28 x 3.78 x 9.35 in)
CertificationETL, CE, EMC, RoHS

Grind Recommendations

Grind LevelFinenessSuitable For
1-4Extra FineEspresso
5-8Slightly FineMoka Pot
9-13FineDrip Coffee, Siphon Pot, Ice Brew
14-19MediumPour Over
20-25Coarse / Extra CoarseFrench Press

User Tips

  • Optimal Aroma: For the best coffee aroma, grind your coffee beans just a few moments before brewing. Storing beans in a sealed container in the refrigerator can help preserve freshness.
  • Grind Consistency: Match the grind fineness to your brewing method. Generally, quicker brewing methods (like espresso) require a finer grind, while slower methods (like French press) require a coarser grind.
  • Taste Adjustment: Experiment with grind settings to find your preferred taste. Start with an intermediate setting and adjust finer or coarser as needed. Note that a very fine grind for espresso might result in a bitter taste if used for filter coffee, and a coarser grind for espresso might yield a weak taste.
  • Grind Setting Changes: Always ensure the mill is not running when adjusting the grind setting to prevent damage.
  • Overheating Protection: If the grinder stops unexpectedly, it might be due to overheating. Allow the unit to cool down for several minutes before attempting to restart it.
  • Hopper Placement: Ensure the bean hopper is correctly positioned and fitted before operation to avoid issues.
  • Noise Level: Users generally find the noise level acceptable compared to other grinders, especially given its performance and price.
  • Turkish Coffee: While the grinder offers fine settings, some users have noted that achieving an extremely fine grind suitable for traditional Turkish coffee might be challenging or inconsistent.

Warranty and Support

Wancle Limited Guarantee

Wancle guarantees this product against any manufacturing defect in materials or workmanship for 1 year, starting from the initial date of purchase or delivery. This commercial guarantee covers all costs related to restoring the proven defective product to its original specifications, including repair or replacement of defective parts and necessary labor.

At Wancle's discretion, a replacement product may be provided instead of repairing a defective product. Wancle's sole obligation and your exclusive resolution under this guarantee are limited to such repair or replacement.

Conditions & Exclusions

Wancle is not obliged to repair or replace any product not accompanied by a valid proof of purchase. The defective product may be returned to the store of purchase.

This guarantee applies only to products purchased and used for domestic purposes and will not cover any damage resulting from:

  • Misuse, negligence, or failure to follow Wancle instructions.
  • Modification or unauthorized repair of the product.
  • Faulty packaging by the owner or mishandling by any carrier.
  • Normal wear and tear, maintenance, or replacement of consumable parts.
  • Using the wrong type of water or consumables.
  • Mechanical damages or overloading.
  • Damages or poor results specifically due to incorrect voltage or frequency as stamped on the product ID or specification.
  • Ingress of water, dust, or insects into the product.
  • Scaling (any de-scaling must be carried out according to instructions for use).
  • Damage as a result of lightning or power surges.
  • Damage to any glass or porcelain ware in the product.
  • Accidents including fire, flood, etc.
  • Professional or commercial use.

Consumer Statutory Rights

Wancle's commercial guarantee does not affect the statutory rights a consumer may have, or those rights that cannot be excluded or limited, nor rights against the retailer from which the consumer purchased the product. This guarantee grants specific legal rights, and consumers may also have other legal rights that vary by country. Consumers may assert such rights at their sole discretion.

Company Information

Company Name: Dongguan Pinle Electronic Technology Co., Ltd

Company Address: tangxiazhen, tangxiadiyigongyelu, 11hao304shi, dongguan, guangdong, 523710, CN

Email: support@wancle.net

Website: www.wancle.net

UK Representative: APRIL WELL LIMITED, Unit 39c St Olavs Court Business Center, Lower Road, London, England, SE16 2XB (aprilwell18@outlook.com)

EC Representative: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, 28046 Madrid, Spain

© 2023 Wancle. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.