Diymore XY12550S

Contents

XY12550S Digital DC Adjustable Step-Down Power Supply User Manual

Model: XY12550S | Brand: Diymore

1. Introduction

The Diymore XY12550S is a high-performance digital DC adjustable step-down power supply module designed for a wide range of applications. It features constant voltage (CV), constant current (CC), and constant power (CW) modes, along with Maximum Power Point Tracking (MPPT) for efficient solar charging. This manual provides detailed instructions for safe and effective use of the device.

2. Key Features

  • Supports firmware upgrade, MPPT solar charging, and serial communication.
  • 1.8-inch high-brightness full-color LCD screen with full viewing angle, customizable color scheme, and 4-way rotation.
  • Features input reverse polarity protection and output reverse current protection for comprehensive safety.
  • The display board uses a gold-plated design for better conductivity, oxidation resistance, and durability.
  • Two intelligent temperature-controlled PWM fans with variable speed and a large heat sink for low noise and efficient cooling.
  • A common-mode inductor is used for the input, significantly reducing input ripple and achieving low output ripple.
  • Independent dual serial ports, serial port TTL and on-board 485.
  • Supports network control via PC host computer and mobile APP (Sinilink control for Android/iOS).
  • Supports global weather systems and global WiFi time synchronization systems.
  • One-to-many group control via 485 bus.
  • Integrated fire-retardant shell with double-buckle design.
  • Silicone buttons with indicator lights.

3. Product Specifications

Product Parameters
ParameterValueParameterValue
Product NameDC buck-power supplyModelXY12550S
Input Voltage12.00~140.0VOutput Voltage0~125.0V
Output Current0~50.00AAccuracy of Voltage±0.5%+1 word
Power Output6250WAccuracy of Current±0.5%+3 word
Resolution of Voltage0.01VResolution of Current0.01A
Storage Data Group10 groupsSoft StartYES
Screen Size1.8-Inch Full-View High-Brightness True Color LCD
Output Ripple Typical Valuevpp-300mv
MPPT FunctionSupport MPPT solar chargingBuzzerYES
Efficiency of ConversionAbout 95%Number of Buttons5
Screen Instrument Size86*50*45mmBare Board Weight with Packaging640g
Bare Board Size170*108*53mmProduct Weight with Packaging715g
Bare Board Package195*120*67mm
Product Package250*120*73mm
Protection Mechanisms
Protection TypeDescription / Default Value
Anti-reverseYES (Input reverse polarity protection, output reverse current protection)
Input Under-Voltage (LVP)10-145.0V, default 10V
Over-Voltage (OVP)0-130.0V, default 130.0V
Over-Current (OCP)0-52A, default 52A
Over-Power (OPP)0-6500W, default 6300W
Over-Temperature (OTP)60-110°C, default 110°C
Over-Time Out (OHP)1 minute - 99 hours 59 minutes, off by default
Over-Capacity (OAH)0-4200KAh, off by default
Over-Energy (OWH)0-4200KWh, off by default
EXT Over-Temperature (ETP)0-110°C, off by default

For a visual overview of specifications and protection mechanisms, refer to the image below:

Product parameters and protection mechanism table
Figure 3.1: Product Parameters and Protection Mechanisms

4. Safety Precautions

  • Do not connect AC power to the input, especially 220V mains power.
  • The maximum input voltage should not exceed 145V; 140V is recommended.
  • Do not reverse the polarity of the input or output connections.
  • This is a DC-DC converter; the maximum output voltage = input voltage * 0.945.
  • Ensure the unit is OFF before connecting any battery or load.
  • Avoid reverse polarity connection to prevent device damage or fire hazards.
  • Turn on the output ONLY after the battery icon appears on the screen to initiate charging (when using MPPT).
Protection mechanisms list and display
Figure 4.1: Comprehensive Protection Mechanisms

5. Setup

5.1 Physical Installation and Connections

The XY12550S module consists of a main power board and a separate display panel. The display panel can be integrated into an enclosure. Refer to the dimensions below for proper installation:

Product size and recommended opening size
Figure 5.1: Product Dimensions and Recommended Opening Size

Connect the display panel to the main power board using the provided cable. Ensure all connections are secure and correct polarity is observed.

Internal components and connections
Figure 5.2: Internal Components and Connection Points

5.2 Bare Board Configuration (Optional)

The bare board can be used independently. It supports MPPT and analog 0.3-10V control, along with serial communication and on-board 485 communication (both can be used simultaneously). The output voltage is adjustable from 0-85V, and the output current from 0-50A.

When purchasing a bare device, switches, potentiometers, and dial switches will be welded on. If a set with a screen meter is purchased, they are not welded by default.

Bare board details, serial communication, 485 communication, MPPT switch, current dip switch settings
Figure 5.3: Bare Board Configuration and Current Dip Switch Settings

To enter potentiometer mode, flip the MPPT ON/OFF switch up to light up the green indicator light. This mode allows output voltage to be controlled via potentiometer and constant current via dip switch. The advantage of using the dip switch for constant current is to prevent multimeter burnout.

6. Operating Instructions

6.1 Universal Button Functions

The display panel features five buttons and a rotary encoder for control:

  • VSET Button: Short Press to set Constant Voltage (CV). Long Press to quickly call up data set M1.
  • SW Button: Short Press to enter quick settings. Long Press to enable four-way screen rotation.
  • ISET Button: Short Press to set Constant Current (CC). Long Press to enter or exit the data group settings UI.
  • Encoder Button: Short Press for Shift. Long Press to Lock the button.
  • Power Button (ON/OFF): Short Press to turn power output on/off. Long Press to shut down.
Universal button functions
Figure 6.1: Universal Button Functions

6.2 Setting Voltage and Current

There are three ways to set voltage and current:

  1. Quick Setup Mode:
    1. Press the V-SET/I-SET button briefly to enter voltage/current setting mode.
    2. Use the SW button or encoder button to move between digits.
    3. Rotate the encoder to adjust the voltage/current value. Once set, press V-SET/I-SET briefly to save and exit.
  2. Encoder Mode:
    1. Press the encoder button briefly to activate the parameter (voltage/current) you want to set.
    2. Press the encoder button to switch between full selection and digit selection. In full selection, all digits are highlighted. Rotate the encoder to switch between setting voltage or current. In digit selection, the selected digit is highlighted. Rotate the encoder to adjust the value.
    3. To finish, either hold the encoder button/SW button for 2 seconds or wait 6 seconds without any button press. All settings are saved automatically.
  3. Remote Control Mode:

    Use an infrared remote control or 433M wireless remote control module to set voltage and current directly with the remote's numeric keypad.

Set Voltage and Current methods
Figure 6.2: Methods for Setting Voltage and Current

6.3 CV, CC, CW Features Introduction

  • Constant Voltage (CV) & Constant Current (CC): When the constant power function is off, the power supply automatically switches between CV and CC based on the load. If load current is less than set constant current, it operates in CV mode (output voltage = set CV, current is adaptive).
  • Constant Power (CW): When enabled, the constant current defaults to maximum, and the constant voltage acts as initial voltage. The device calculates load resistance (R=U/I) and then adjusts voltage/current to maintain constant power (P=U/R).

Constant Power Switch and Constant Power Value Setting:

  1. In the system parameter settings UI, select the CW option. Turn ON to enable constant power, and turn OFF to disable it.
  2. After enabling constant power, press ISET briefly on the main interface to modify the value of constant power.
CV CC CW Features Introduction
Figure 6.3: CV, CC, CW Operation Modes

6.4 Data Set Management

  • Lock Function: Hold the encoder button for more than 2 seconds to lock/unlock buttons and prevent accidental changes.
  • Quickly Recall Data Sets: Hold the V-SET button to quickly load M1 data set. To select other data sets, hold the I-SET button to open the selection window, rotate the encoder to choose, then press I-SET or SW/encoder button to load.
  • Quickly Adjust System Parameters: On the main screen, briefly press the SW button to select a status bar parameter. Rotate the encoder to switch parameters. Briefly press SW or encoder button to adjust or open the parameter setting interface. Use the encoder to set the value. To save, hold SW/encoder button for 6 seconds without operation.
Lock Function, Quickly Recall Data Sets, Quickly Adjust System Parameters
Figure 6.4: Data Set and System Parameter Management

6.5 Display Customization and Rotation

The 1.8-inch full-color LCD screen supports 8 color options, allowing users to customize the interface colors. The display also supports 4-way rotation. Long press the SW button on the main UI to enable four-way rotation.

Display color customization
Figure 6.5: Display Color Customization Options
360° rotation feature
Figure 6.6: 360° Display Rotation

6.6 Network and Remote Control

The module supports network control via LAN penetration, real-time communication, and remote control via an external network with unlimited distance. It also supports email notifications and cloud record keeping. Control is possible through a PC host computer or the mobile Sinilink APP (Android/iOS).

Network control diagram (PC, mobile APP, router)
Figure 6.7: Network Control Setup

The device also supports global weather systems and WiFi time synchronization.

Global weather and WiFi time synchronization display
Figure 6.8: Weather and Time Synchronization Display

Remote control is also possible using an infrared remote control or a 433M wireless remote control module.

Remote control module and remote
Figure 6.9: Remote Control Modules

The multi-serial port host software allows connectivity of up to 247 devices to a single serial port, enabling control of over a thousand devices in a clustered environment. It also supports batch control and administrative accounts for secure access.

Multi-Serial Port Host Software interface
Figure 6.10: Multi-Serial Port Host Software Interface

6.7 Group Control

The digital control panel supports one-to-many group control. By turning on the group control switch on the panel, you can collectively manage power supply activation/deactivation, voltage/current settings for multiple devices via the 485 bus.

Activating Group Control Function: On the main power supply interface, briefly press the SW button to select the right status bar. Rotate the encoder to choose the group control switch icon, then briefly press the encoder button to open the selection dialog. Press the SW or encoder button to select and rotate the encoder to ON to enable group control mode. When setting voltage, current, or power on/off, the changes will automatically synchronize to all devices on the 485 bus (Note: Device addresses on the bus must be unique). Hold the SW button or wait 6 seconds without operation to exit and save settings automatically.

One-to-many group control setup
Figure 6.11: One-to-Many Group Control

Communication control can also be achieved with a separate bare board, providing a low-cost solution with independent dual serial ports (TTL and 485).

Low-cost communication power supply with 485 bus control
Figure 6.12: Low-Cost 485 Bus Communication

7. MPPT Solar Charging

The XY12550S supports MPPT solar charging, allowing it to charge various rechargeable batteries with reverse current protection. It features automatic stop when fully charged and automatic charging at low battery, enabling intelligent battery charging management.

An external temperature probe can be connected for over-temperature protection. Attach the external temperature probe to the battery, and the unit will automatically stop charging if over-temperature is detected.

With BCH automatic charging and BTF full-charge auto-stop functions, unattended operation is possible.

MPPT solar charging setup with external temperature probe
Figure 7.1: MPPT Solar Charging Setup with External Temperature Probe

Precaution: Ensure the unit is OFF before connecting the battery. Avoid reverse polarity connection to prevent device damage or fire hazards. Turn on the output ONLY after the battery icon appears on the screen to initiate charging.

8. Firmware Upgrade

The device supports firmware upgrades to experience new features. Currently, it only supports firmware upgrade through the WiFi module. Future upgrades will also be possible through the multi-serial port host computer software (under development).

Firmware upgrade process
Figure 8.1: Firmware Upgrade Interface

Note: Do not power off during the product upgrade process. If the product upgrade fails, you can press and hold the power button to power on the product and force it into the upgrade mode.

9. User Tips

  • For optimal performance and longevity, ensure proper ventilation around the module, especially during high-power operation. The dual-fan thermal architecture is designed for efficient cooling, but adequate airflow is still important.
  • When using the remote control, ensure the remote control module is properly connected and within range for reliable operation.
  • Regularly check for firmware updates via the WiFi module to benefit from new features and improvements.
  • Always double-check wiring connections, especially polarity, before powering on the device to prevent damage.

10. Troubleshooting

  • No Power/Display: Check input voltage connections and ensure they are within the specified range (12.00~140.0V). Verify the power switch is ON.
  • Output Not Activating: Ensure the output is enabled via the ON/OFF button. Check for any active protection mechanisms (LVP, OVP, OCP, etc.) indicated on the display.
  • Inaccurate Readings: Verify all connections are secure. If using the bare board, ensure dip switch settings for current are correct.
  • MPPT Not Functioning: Ensure the MPPT ON/OFF switch is in the correct position (green indicator light). Check battery connections and ensure the battery icon appears on the screen before enabling output.
  • Communication Issues: Verify serial port connections. Ensure the correct software/APP is being used and configured properly for Modbus or network control.
  • Firmware Upgrade Failure: Do not power off. Press and hold the power button to force the device into upgrade mode and retry the update.

11. Maintenance

  • Keep the device clean and free from dust and debris to ensure proper cooling and prevent short circuits.
  • Avoid exposing the device to moisture or extreme temperatures.
  • Periodically check all wiring connections for tightness and signs of wear.
  • The dual intelligent temperature-controlled PWM fans are designed for extended lifespan, but ensure their vents are not obstructed.

12. Package Contents

  • Package A: Adjustable power supply ×1, Display panel ×1, Cables ×2
  • Package B: Adjustable power supply ×1 (Base board can be used independently)

Note: The specific package contents depend on the purchased variant.

13. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.

You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)

14. Product Demonstration Video

Watch this video for a quick demonstration of the product's features and operation:

Video 14.1: Product Operation Demonstration

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.