1. Introduction
1.1 Product Overview
The XAG XRTK7 P150pro is a multi-function locator designed for precise positioning tasks, often used in conjunction with drone systems. It provides accurate real-time kinematic (RTK) positioning data to enhance the performance of compatible devices.
1.2 Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- XAG XRTK7 Multi-function Locator
- USB Cable
- User Manual (this document)

Description: The image shows the XAG XRTK7 device, a USB cable, and the printed user manual (titled "极飞 XRTK7 多功能定位器 使用说明 Version 1.0") neatly arranged within its cardboard packaging.
2. Setup
2.1 Device Components
Familiarize yourself with the main components and controls of the XRTK7 locator:

Description: A close-up of the top part of the XAG XRTK7 device, highlighting the control panel. Visible elements include a red power button, a red location/map pin button, and four smaller buttons labeled 'A', 'B', 'C', and 'S'. Several indicator lights (red and green LEDs) are also visible.
- Power Button: (Red circle with line icon) Used to power the device on or off.
- Location/Map Pin Button: (Red circle with map pin icon) Likely used for marking points or activating positioning functions.
- Function Buttons (A, B, C, S): These buttons are typically used for selecting modes, confirming actions, or setting specific parameters. Refer to the operation section for detailed functions.
- Indicator Lights: A series of LED lights (red, green) provide status information regarding power, signal reception, battery level, and operational mode.
2.2 Initial Power-Up
- Ensure the device has a stable power source. The XRTK7 does not include an internal battery and requires external power or user-supplied batteries.
- Press and hold the Power Button (red circle with line icon) for a few seconds until the indicator lights illuminate.
- Observe the indicator lights for initial status.
2.3 Connecting to External Devices
The XRTK7 is designed to integrate with other XAG systems. Use the provided USB cable or wireless connection methods to link the locator with compatible devices such as drone ground stations or other XAG equipment.
For specific connection procedures with XAG P100 Pro or APC2, please refer to the detailed instructions provided in the official XAG documentation for those respective products, or contact XAG technical support for guidance.
3. Operation
3.1 Basic Controls
- Power On/Off: Press and hold the red Power Button.
- Mode Selection: Use buttons A, B, C, or S to cycle through or select different operating modes. The specific function of each button depends on the active mode.
- Point Marking/Positioning: Press the red Location/Map Pin Button to mark a point or initiate a positioning sequence.
3.2 Positioning Modes
The XRTK7 supports various positioning modes, including RTK (Real-Time Kinematic) for high-precision applications. The active mode is typically indicated by the status lights or a display (if available).
- RTK Mode: Provides centimeter-level accuracy for critical tasks. Requires a stable connection to an RTK base station or network.
- Standard GPS Mode: Offers general positioning accuracy when RTK corrections are not available.
3.3 Indicator Lights
The LED indicator lights on the control panel provide crucial feedback on the device's status:
| Light Color/State | Meaning |
|---|---|
| Solid Green | Device is powered on and operating normally. |
| Blinking Green | Acquiring satellite signal or data transmission in progress. |
| Solid Red | Error, low battery (if applicable), or critical warning. |
| Blinking Red | Warning, signal loss, or awaiting user input. |
Note: Specific light patterns and their meanings may vary. Refer to the full XAG XRTK7 manual for a comprehensive guide.
4. Maintenance
4.1 Cleaning
- Wipe the device with a soft, dry cloth.
- For stubborn dirt, use a slightly damp cloth with mild soap, then wipe dry immediately.
- Do not use harsh chemicals, solvents, or abrasive cleaners.
- Ensure all ports are free from dust and debris.
4.2 Storage
- Store the XRTK7 in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for extended periods, ensure the device is clean and properly powered off.
- Keep out of reach of children.
5. Troubleshooting
If you encounter issues with your XAG XRTK7, try the following basic troubleshooting steps:
- Device not powering on:
- Check the external power source or ensure user-supplied batteries are correctly installed and charged.
- Verify the power cable connection.
- No signal/Poor accuracy:
- Ensure the device has a clear view of the sky, free from obstructions.
- Check for interference from other electronic devices.
- Verify connection to the RTK base station or network.
- Connectivity issues:
- Ensure the USB cable is securely connected.
- Check wireless connection settings on both the XRTK7 and the external device.
For more complex issues, refer to the comprehensive troubleshooting section in the official XAG XRTK7 manual or contact XAG technical support.
6. Specifications
| Feature | Detail |
|---|---|
| Model | XRTK7 P150pro |
| Material | Composite Material |
| Origin | Mainland China |
| Recommended Age | 14+y |
| Use | Vehicles & Remote Control Toys (Drone Accessory) |
| Power Source | External (No internal battery included) |
| High-concerned chemical | None |
| Package Length | 30 cm |
| Package Width | 20 cm |
| Package Height | 20 cm |
| Package Weight | 2.0 kg |
7. User Tips
- Power Supply: The XRTK7 does not come with an internal battery. Ensure you have a compatible external power source or user-supplied batteries ready for operation.
- Compatibility: For specific compatibility details with XAG P100 Pro, APC2, or other XAG drone systems, always consult the latest official XAG documentation or contact their technical support directly.
- Signal Acquisition: For optimal RTK performance, operate the locator in an open area with a clear view of the sky, away from tall buildings or dense foliage that could obstruct satellite signals.
8. Warranty and Support
The XAG XRTK7 P150pro is covered by a manufacturer's warranty. For detailed information regarding warranty terms, duration, and service procedures, please refer to the warranty card included with your product or visit the official XAG website.
For technical assistance, troubleshooting beyond the scope of this manual, or inquiries about spare parts, please contact XAG customer support through their official channels.