FEELWORLD FW568S

Contents

FEELWORLD FW568S 6 Inch Full HD Field Camera Monitor

Model: FW568S

Foreword & Cautions

Thank you for purchasing our 6-inch Full HD monitor. Please read this manual carefully before using the unit. Have a great experience!

General Cautions

  • Please avoid heavy impact and dropping the product onto the ground.
  • Do not cover the vents and holes on the enclosure. Do not place the machine on a bed, sofa, or rug to ensure good ventilation. Improper ventilation can lead to overheating and reduce service life.
  • The screen is made of glass. Do not drop the screen towards the ground. Keep away from injury if the screen is broken.
  • Keep the product away from heat sources such as radiators, water heaters, stoves, and other heating products.
  • Avoid prolonged exposure to direct sunlight, as this can damage the LCD screen.
  • To prevent damage, do not disassemble or repair the unit yourself without adjustable components.
  • To maintain the LCD screen, follow these guidelines to avoid scratches, discoloration, and other damages:
    • Refrain from using hard objects to hit the screen.
    • Do not force to wipe the screen.
    • Do not use chemical solutions to clean the screen.
    • Do not spray any detergent directly on the screen.
    • Do not write on the screen directly.
    • Do not stick anything on the screen.
    • Simply wipe the screen with a clean, soft cloth and ensure no water is left on it.
  • To protect the plastic cover:
    • Do not use chemical solutions to clean the cover.
    • Keep away from volatile substances.
    • Do not clean the case hard.
    • Simply wipe with a clean, soft cloth and ensure no water is left on the cover.

Key Features

  • 6-inch 1920x1080 Full HD IPS screen.
  • New UI interface for easier setup and operation.
  • Scroll Wheel button operation: A single button can complete all operations.
  • Supports 3D LUT Log to REC.709 conversion and user 3D LUT upload (up to 32).
  • Equipped with professional auxiliary functions: Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome, False Colors, Exposure, Zoom-in, Image Flip, Embedded Audio, Nine Grid, Peaking Filter, Anamorphic Mode, etc., to help accurately expose and focus every shot.
  • Multiple power supply modes: DC IN 12V, Type-C 5V, and NP-F battery slot.
  • Stereo Earphone output.
  • DC 8V power output to power your DSLR or mirrorless camera.

Product Description

Front Panel

The front panel features the 6-inch Full HD IPS display, providing a clear view of your footage and monitoring tools.

FEELWORLD FW568S monitor on camera, showing UI with waveform.
FEELWORLD FW568S monitor in use, displaying the user interface with waveform and other monitoring tools.
Close-up of the FW568S screen displaying a vibrant sunset image, highlighting 450nit Brightness, 367PPI, 1000:1 Contrast Ratio, and 160° Wide Viewing Angle.
The 6-inch Full HD 1920x1080 IPS screen offers 450nit brightness, 367PPI, 1000:1 contrast ratio, and a 160° wide viewing angle for sharp and rich color images.

Back Panel

The back panel includes the F970 battery plate and mounting points for external accessories.

Back of the monitor with the Sony F970 external install and power kit, showing it attached to a camera setup with an LED light and a wireless transmitter.
Rear view of the monitor, illustrating the F970 battery plate and the external install and power kit for attaching accessories.

1.1 Button Instruction

The monitor features a simple button layout for easy control:

ButtonFunction when OSD is not displayedFunction when OSD is displayed
MODELong press: Turn ON/OFF power
Short press: Signal mode switching
Long press: Turn off power
F1Custom button F1N/A
F2/EXITCustom button F1Return to previous OSD menu / Exit the menu
MENU (Scroll Wheel)Short press: Bring up main menu
Scroll: Volume/Backlight adjustment
Scroll: Select next menu item or adjust function/parameter value
Short press: Confirm selected item/function
Long press: Return to previous OSD menu / Exit the menu

1.2 Port Instruction (Bottom)

The bottom of the monitor features several important ports:

  • Type-C: Type-C power input. Recommended for local power supply only. Not recommended for connecting other devices to provide loop-out power. Also used for firmware updates and LUT file import.
  • 3.5mm Earphone Slot: Stereo earphone port output.
  • DC OUT 8V: DC power output interface. Polarity is positive center. This barrel output can power your camera with a separately available DC coupler via an adapter (e.g., NP-FW50 Sony, LP-E6 Canon, DMW-BLF19 Panasonic).
  • DC IN 12V: DC power input interface. Polarity is positive center.
Diagram showing the monitor's bottom ports (Type-C, 3.5mm Earphone, DC OUT 8V, DC IN 12V) and how DC OUT 8V can power a camera via a dummy battery adapter.
Detailed view of the monitor's bottom ports, including Type-C, 3.5mm Earphone, DC OUT 8V, and DC IN 12V. The DC OUT 8V can power a camera using a dummy battery adapter.

1.3 Port Instruction (Left)

The left side of the monitor provides video input and output options:

  • HDMI IN: V1.4 HDMI signal input, up to 4K@30Hz.
  • HDMI OUT: V1.4 HDMI signal output, up to 4K@30Hz.
  • SDI OUT: SDI signal output.
  • SDI IN: SDI signal input.
Side view of the monitor detailing SDI/4K HDMI IN & OUT ports and 4K HDMI format supports.
Left side of the monitor showing HDMI IN/OUT and SDI IN/OUT ports, compatible with various camera types.

1.4 Power Supply Way

The monitor offers flexible power options:

  1. F970 Battery Plate: The rear cover is equipped with an F970 battery plate, compatible with Sony F970 series batteries (F970, F960, F950, F930, F770, F750, F730, F570, F550, F530). It is recommended to use standard original F970 batteries. When using battery power, the two power output interfaces (DC OUT 8V and external install and power kit) can connect to other devices. For powering other devices, a larger capacity battery is recommended for longer use time.
  2. DC 12V Input: The left side of the monitor has a DC 12V input power port (5.5mm outer, 2.1mm inner) supporting 7~24V wide voltage. A DC power adapter needs to be purchased separately. When using an external adapter, the two power output interfaces (DC OUT 8V and external install and power kit) can connect to other devices. A minimum 3A power adapter is recommended when powering other equipment.
  3. Type-C 5V Input: The bottom of the monitor has a Type-C 5V input power port. This port can be connected to a power bank for power supply and is not used for data transmission. It is recommended for local power supply only, not for connecting other devices to provide loop-out power.

Remark: Please take off the battery from the monitor if you don't use the monitor for a long time.

Diagram illustrating multiple power supply modes: F970 battery, Type-C, and DC 12V input.
The monitor supports multiple power input options: F970 battery, Type-C 5V, and DC 12V.

1.5 Sony F970 Install and Power Kit

An external Sony F970 install and power kit is integrated into the back of the monitor. This kit allows you to mount and power external equipment such as wireless transmitters, LED lights, and video converters using an F970 battery.

The kit features two cross grooves, allowing adjustment of the external device's position by loosening two screws (up/down or left/right), or installing the kit upside down. If the kit is not needed, it can be removed by loosening the screws.

Note: Before disassembling the kit, ensure the monitor is turned off, and then remove the battery or power adapter.

Moving the Kit:

  1. Loosen the 2 screws.
  2. Adjust the kit up/down or left/right to the desired position.

Removing the Kit:

  1. Loosen the 2 screws.
  2. Use both hands to move the kit left.
  3. Move the round holes to align with the corresponding 2 screws.

Installing the Kit:

  1. Screw the 2 screws back into the screw holes used to install the kit on the back of the monitor.
  2. Install the 2P power cable to the cutout.
  3. Align the round hole of the kit with the screw.
  4. Push the kit to the screw at the center of the kit cross, then tighten the screws.
Diagram showing the structure of the monitor with button labels, ports, and F970 battery slot. Also includes a packing list.
Detailed diagram of the monitor's structure, including the F970 battery slot and power kit installation points.

1.6 Mount Points

1/4-20 Thread Points

The monitor features three 1/4-20 thread points (top, bottom, right side) for easy connection to hot shoe mounts or tripod fixed installations.

Diagram showing multiple installation methods using 1/4-20 thread points (top, bottom, right) for mounting on camera or other equipment.
Illustrates various mounting configurations using the 1/4-20 thread points for flexible setup.

Tilt Arm Mounting

The included Tilt Arm secures the monitor to your camera via a shoe mount or 1/4"-20 thread. The Tilt Arm allows 180° of tilt for convenient monitoring at nearly any angle. A cold shoe on the Tilt Arm enables you to secure additional equipment (e.g., microphone, LED light, or wireless receiver) that would otherwise occupy the camera's accessory shoe.

Diagram showing the tilt arm mounting with 360° rotation and cold shoe for accessories, attached to a camera.
The tilt arm provides flexible positioning and an additional cold shoe for accessories.

1.7 Sunshade

The monitor comes with a portable sunshade for improved visibility in bright conditions.

Sunshade Installation:

  1. Attach the Velcro (hook side) to the outside of the sunshade frame of the monitor.
  2. Open the sunshade.
  3. Align the Velcro (loop side) on the inside of the sunshade with the Velcro (hook side) on the monitor sunshade frame.
  4. Complete the sunshade installation.
Sunshade installation steps, showing Velcro, sunshade frame, sunshade, and application.
Visual guide for attaching and using the sunshade.

Operation

2. Menu Operation Instruction

After correctly connecting to the power supply, the indicator will turn red. Press the power button to turn on the monitor; the indicator will turn yellow. Upon receiving input signals, the indicator will turn green from yellow.

2.1 Adjusting Volume/Backlight (when menu is not displayed)

When the menu is not displayed, scroll the wheel to adjust the volume or backlight. You can also select "Left and Right Key Set" in the "User Options" menu to configure these adjustments.

2.2 Accessing the Main Menu

Press the "MENU" scroll wheel button to enter the OSD main menu. Scroll the wheel to navigate through the secondary menu functions.

2.3 Navigating Secondary Menus

Press the "MENU" wheel key to enter a secondary menu. Scroll the wheel to select a function, then press "MENU" again to confirm.

2.4 Adjusting Parameters

Scroll the wheel to adjust the parameter values.

2.5 Exiting Menus

Long press the MENU wheel button or press F1/EXIT to exit the menu.

3. Menu Interface Instruction

The new UI design features iconized software functions and values at a glance, making operation more convenient and quicker.

Monitor displaying the new UI menu with various assist, marker, image, user option, and system settings.
The monitor's user interface showing various menu options and settings.

4. Menu Function Instruction

The monitor includes a wide range of professional auxiliary tools to assist with accurate focus and exposure during shooting:

Monitor displaying various professional auxiliary tools like 3D LUT, Waveform, Vector Scope, Histogram, Peaking Filter, Anamorphic Mode, False Colors, Exposure, Zoom-in, Image Flip, Embedded Audio, Nine Grid.
Visual representation of the various professional auxiliary tools available on the monitor.

Assist Functions

FunctionDescription
All WavesOn/Off. When turned on, waveform, vector, histogram, and embedded audio will be shown.
WaveformOn/Off. Mode: RGB, YUV, Y. Assists with professional video camera calibration by showing overall brightness. Checks lighting evenness for chromakey or background. Waves Trans.: Off, 25%, 50%, 75%.
VectorOn/Off. Shows image saturation and where pixels land on the color spectrum.
HistogramOn/Off. Mode: RGB1, RGB2, Y.
Focus AssistOn/Off. Color: Red, Green, Blue. Peaking Level: Adjustable after turning on (1~10).
Embedded AudioOn/Off. Audio Level Meters provide numerical indicators and headroom levels. Green audio meter turns yellow when exceeding -20dB, and red when exceeding -9dB.
Over ExposureOn/Off. Exposure Level: Adjustable after turning on (10~100).
Check FieldOn/Off. Mode: Red, Green, Blue, Mono.
False ColorsOn/Off. Displays false colors to help evaluate exposure levels.
Monitor displaying 'All Scopes Mode' with waveform, vector scope, and histogram for accurate monitoring.
Accurate waveform monitoring in 'All Scopes Mode' for detailed image quality analysis.

Marker Functions

FunctionDescription
Nine GridOn/Off. Color: Red, Green, Blue, Black, White, Gray.
Safe FramesOn/Off. Mode: 80%, 85%, 90%, 93%, 96%, 2.35:1. Color: Red, Green, Blue, Black, White, Gray.
Center MarkerOn/Off. Color: Red, Green, Blue, Black, White, Gray.
Ratio MarkerOn/Off. Mode: 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1. Color: Red, Green, Blue, Black, White, Gray. Modified Mark: 0~5.

Image Functions

FunctionDescription
Scan ModeUnder Scan, Over Scan.
Aspect RatioAuto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen.
AnamorphicMode: 1.33X, 1.6X, 2.0X, 2.0X MAG, User. Under User, can be customized (1.20X~2.00X).
Image FlipOn/Off. Mode: H Flip, V Flip, H_V Flip.
Zoom ModeOn/Off. Mode: 2X, 4X, 9X, 16X, User. Under User, can be customized (100%~200%).
Image FreezeOn/Off.
P2P (Pixel to Pixel)On/Off. Displays the image at its native resolution.

User Option Functions

FunctionDescription
LUT (Look Up Table)On/Off. After LUT Switch is turned on, you can use built-in LUTs (SLOG2, SLOG3, LOGC, VLOG).
Lut Import: Confirm. Copy 3D LUT files to a USB flash drive, insert into the TYPE-C to USB Connector, then press "MENU" wheel button to confirm import.
Lut Table: Shows 4 built-in LUTs and custom loaded LUTs (up to 32).
Display AdjustmentAdjust Backlight (0~100), Brightness (0~100), Contrast (0~100), Saturation (0~100), Tint (0~100).
Color AdjustmentColor Temp.: 5600K, 6500K, 9300K, User. Under User, Red, Green, and Blue of the image can be adjusted (0~255).
Shortcut Key (F1, F2)To set the 2 shortcut custom buttons F1, F2 on the panel. Example: Use "MENU" scroll wheel to navigate to User Option, select Shortcut Key, choose F1 or F2, and select a function from the pop-up list.
Left Right Key SetVolume, Backlight. Configures the scroll wheel's function when the OSD is not displayed.
Monitor displaying a scene with different 3D LUT looks applied, demonstrating the custom 3D LUT loading feature.
The monitor supports loading up to 32 custom 3D LUTs for precise color calibration and previewing filming looks.

System Functions

FunctionDescription
LanguageDeutsch, 日本語, 繁體中文, 한국어로, русский язык, English, Español, Português, Français, Nederlands, Simplified Chinese, Traditional Chinese Style.
OSD OptionOSD Time: Off, 15Sec, 30Sec, 45Sec. OSD Trans: Off, 25%, 50%, 75%. No Signal: Red, Green, Blue, Black, White, Gray.
VolumeOn/Off. Adjustable from 0~100.
ResetScroll the wheel to select Reset and press Confirm to return the system to original settings.
Firmware UpdateAfter copying the upgrade file to a USB flash drive and inserting it into the TYPE-C to USB Connector, press "MENU" wheel button to Confirm update. Reboot the monitor after upgrading.

Technical Parameters

ParameterValue
Panel Size6" IPS
Resolution1920x1080 pixels
Dot Pitch0.069 (H) × 0.069 (V) mm
Aspect Ratio16:9
Brightness450cd/m²
Contrast1000:1
Viewing Angle80°/80°(L/R) 80°/80°(U/D)
BacklightLED
InputSDI, HDMI, DC IN 5V (Type-C)
Note: please use 5V/2A or more than 2A Type-C power
OutputSDI, HDMI, DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner)
Audio3.5mm Stereo Headphone
HDMI Support Format480i/480p/576i/576p
720p(60/59.94/50/30/29/25/24/23.98)
1080i(60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz)
DCI 4K 4096×2160p (24Hz)
SDI Support Format720p (60/59.94/50/30/29/25/24/23.98)
1080i (60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
Input VoltageDC: 7~24V
Power Consumption≤9W
Battery PlateF970 Battery Plate
Install Way1/4-20 mount points (top, bottom, right)
Working Temperature-20℃~50℃
Storage Temperature-30℃~60℃
Unit Size151L×92H×31.4D (mm)
Unit Weight203g

Troubleshooting

6.1 Only black and white or monochrome picture:

  • Check saturation, brightness, and contrast adjustments in the menu.
  • Check if "Check Field" is set to black, white, or monochrome image mode, or any other condition that might cause this.

6.2 No Image after powering on:

  • Check if the signal cable connection is in good condition.
  • Check the signal cable connection and ensure you are using the standard adapter to connect the monitor.
  • If power is supplied by battery, check if the battery is fully charged.

6.3 Earphone No sound:

  • Check if Volume control is enabled.
  • Press the volume button and try to increase the volume.

If there are still other problems, please contact our related technologists.

As we are improving product features and product performance, specifications may change without prior notice.

User Tips

  • Always ensure your battery is fully charged before a shoot to avoid unexpected power loss, especially when powering external devices.
  • Utilize the custom shortcut buttons (F1, F2) for frequently used functions like Focus Assist or False Colors to speed up your workflow.
  • Experiment with the 3D LUT loading feature to preview different color grades directly on set, saving time in post-production.
  • When using the external install and power kit, ensure screws are securely tightened to prevent accidental detachment of accessories.
  • For optimal viewing in bright outdoor conditions, always attach the sunshade.

Warranty and Support

For detailed warranty information and technical support, please refer to the official FEELWORLD website or contact your local distributor. Keep your purchase receipt for warranty claims.

A PDF version of this user manual is available for download: FEELWORLD FW568S User Manual (PDF)

Product Video Overview

Watch this video for a visual overview of the FEELWORLD FW568S monitor's features and setup:

Video showcasing the FEELWORLD FW568S monitor's features, including its 6-inch size, tilt arm, auxiliary functions, and various input/output options.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.