1. Introduction
This manual provides essential information for the safe and efficient use of your DykbRadio IP2369 Charge-Discharge Module. This versatile module supports 2-6 series Li-ion or LiFePO4 batteries, offering PD3.1 45W bidirectional fast charging and discharging capabilities, complete with an integrated LCD for real-time monitoring of voltage, current, power, and temperature.
2. Safety Warnings
- WARNING: Stay away from children and avoid misoperation.
- WARNING: Please do not disassemble or modify this product by yourself. Non-professional repairs may cause damage or safety accidents.
3. Product Overview
The DykbRadio IP2369 is a high-performance charge-discharge module designed for various battery applications, including drone batteries, power banks, and electric tool batteries. It features advanced fast charging protocols and comprehensive protection mechanisms to ensure safe and efficient operation.
Key Features:
- Wide Compatibility: Supports 2-6 series Li-ion (4.2V/cell) or LiFePO4 (3.6V/cell) battery configurations.
- Fast Charging Protocols: Integrated Huawei FCP (Input/Output Fast Charge), Samsung AFC (Input/Output Fast Charge), DRP Try.SRC, PD3.1 Output, and QC2.0/QC3.0/QC3.0+ Output protocols.
- Type-C Interface: Input/Output via USB-C, with a maximum power of 45W.
- Comprehensive Protection: Includes input over-voltage/under-voltage protection, output over-current/short-circuit protection, battery over-current, over-discharge, and over-charge protection, and temperature protection.
- LCD Display: Real-time display of voltage, current, power, and temperature.

4. Setup and Configuration
4.1 Initial Check
- Check if all accessories are complete after unboxing.
- Refer to this manual for basic settings.
4.2 Battery String Configuration
Before connecting the battery, you must configure the module for the correct number of battery strings (2S, 3S, 4S, 5S, or 6S) by short-circuiting the appropriate pads on the back of the module. The factory default setting is 2S.

4.3 Parameter Adjustment via LCD
After connecting the battery, you can adjust various parameters using the onboard button and LCD display:
- Enter Adjustment Mode: Long press the button to enter the LCD parameter adjustment interface.
- Adjust Values: Short press the button to adjust the displayed value.
- Switch Categories: Long press the button to switch between parameter categories (e.g., battery type, string number, power).
- Set Max Power: Configure the maximum power output (20W, 27W, 30W, 36W, 45W) through the keys.
- Set Battery Type: Select the battery type (Li-ion (NMC) / LiFePO4) and cell voltage (4.4V, 4.35V, 4.3V, 4.2V, 4.1V, 3.65V) through the keys.
- Save & Exit: Short press the button twice to save your settings and exit the adjustment interface.

5. Operating Instructions
Once the module is configured and the battery is connected, you can begin using it for charging or discharging:
- Connect Battery: Ensure the battery string is correctly welded to the module's battery interface.
- Configure Module: Set the battery type, string number, and desired power output using the LCD parameter adjustment interface as described in Section 4.3.
- Connect Power Source/Device: Finally, insert the TYPE-C power supply for charging, or connect a device to the TYPE-C port for discharging.
- Monitor Display: The LCD will display real-time information including input/output voltage, current, power, and temperature, along with a charging/discharging indicator.
Demonstration Video:
Video 1: Demonstration of the IP2369 module's operation, including connecting a battery and observing the LCD display during charging/discharging.
6. Precautions
- Do not use the product in damp or dusty environments.
- Avoid severe impact or vibration on the product to prevent damage.
- Ensure correct battery polarity and string count settings to prevent damage to the module or battery.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | IP2369 2S 3S 4S 5S 6S Li-ion/LiFePO4 Battery Charge-Discharge Module |
| Brand Name | DykbRadio |
| Type | PD3.1 45W bidirectional fast charging |
| Size | LCD displays voltage and current power temp (Module size: 6x3.2x1.3CM) |
| DIY Supplies | Electrical |
| Output Voltage | type-c usb XT30 |
| Style | Power Banks, Drone RC Batterie Charger |
| Origin | Mainland China |
| Certification | NONE |
| Semi-finished product | Yes |
| Data Record | No |
| High-concerned chemical | None |
| Electronic | No |
8. Troubleshooting
- No Display/Power: Ensure the battery is correctly connected and charged. Verify the USB-C power source is functional if charging.
- Incorrect Charging/Discharging: Double-check the battery type and string number settings on the LCD. Ensure they match your battery pack.
- Overheating: Disconnect the module and battery immediately. Check for short circuits or excessive load. Ensure adequate ventilation.
- Module Not Responding: Disconnect all power sources and batteries, then reconnect. If the issue persists, re-verify all connections and settings.
9. Additional Resources
For a detailed user manual and further documentation, please refer to the official PDF document: User Manual (PDF).