LG EAX65392311-G, EBR80578811, EBR80578814, EBR805788 Series

Contents

LG Drum Washing Machine Computer Board Instruction Manual

Models: EAX65392311-G, EBR80578811, EBR80578814, EBR805788 Series

1. Product Overview

This document serves as an instruction manual for the replacement computer board (mainboard) designed for LG drum washing machines. It provides essential information regarding the board's specifications, installation, and general care.

Top view of LG Drum Washing Machine Computer Board EAX65392311-G / EBR805788 series mainboard.
Figure 1: Top view of the LG Drum Washing Machine Computer Board (EAX65392311-G / EBR805788 series).
Video 1: A 360-degree view of the LG Drum Washing Machine Computer Board, showcasing its various components and connectors.

2. Safety Information

  • Always disconnect the washing machine from the power supply before attempting any installation, maintenance, or repair.
  • Wear appropriate personal protective equipment (PPE), such as gloves, to prevent injury.
  • If you are unsure about any step, consult a qualified appliance technician.
  • Handle the computer board with care to avoid damage to electronic components. Avoid touching exposed circuitry.

3. Installation (Replacement)

This computer board is a replacement part. Installation typically involves removing the old board and connecting the new one. The exact procedure may vary depending on your specific washing machine model. Refer to your washing machine's service manual for detailed instructions.

3.1 Pre-Installation Steps

  1. Disconnect Power: Ensure the washing machine is completely unplugged from the electrical outlet.
  2. Access the Mainboard: Locate and open the access panel(s) on your washing machine that house the main control board. This often involves removing screws and/or clips.
  3. Document Connections: Before disconnecting anything, take clear photos or make a diagram of all wire connections to the old mainboard. Pay close attention to the color and position of each wire and connector.

3.2 Removing the Old Board

  1. Carefully disconnect all wiring harnesses and cables from the old mainboard.
  2. Unmount the old mainboard from its housing. This may involve releasing clips or removing screws.

3.3 Installing the New Board

  1. Position the new computer board into the washing machine's housing, ensuring it aligns correctly with mounting points.
  2. Secure the new board using the original screws or clips.
  3. Reconnect all wiring harnesses and cables to the new board, using your photos/diagrams as a guide. Ensure all connections are firm and correctly seated.
Close-up of the mainboard's connectors, including yellow and black terminals, and a fuse labeled 'FUSE2 T6A L 250V'.
Figure 2: Close-up view of various connectors and the fuse (FUSE2 T6A L 250V) on the mainboard. Ensure all connections are secure.

3.4 Post-Installation

  1. Close and secure all access panels.
  2. Plug the washing machine back into the power supply.
  3. Perform a test cycle to ensure proper functionality.

4. Operating Instructions

The computer board is an internal component that controls the functions of your LG drum washing machine. It does not have direct user-operable controls. Once correctly installed, the washing machine should operate as designed, responding to the commands from the user interface panel.

5. Maintenance

The computer board itself requires minimal maintenance. However, to ensure its longevity and proper function:

  • Keep Dry: Ensure the area around the mainboard remains dry and free from moisture, which can cause short circuits and damage.
  • Clean Connections: Periodically, with the power disconnected, inspect the connectors for any signs of corrosion or loose connections. Gently clean with a soft, dry brush if necessary.
  • Ventilation: Ensure the washing machine's internal ventilation is not obstructed to prevent overheating of electronic components.

6. Troubleshooting

If your washing machine experiences issues after replacing the mainboard, consider the following troubleshooting steps:

  • Check All Connections: Re-verify that all wiring harnesses are securely and correctly connected to the mainboard. Refer to your pre-installation photos/diagrams.
  • Power Supply: Ensure the washing machine is receiving power and that the circuit breaker has not tripped.
  • Fuse Check: Inspect the fuse on the mainboard (e.g., FUSE2 T6A L 250V, as seen in Figure 2) for continuity. A blown fuse will need to be replaced with one of the exact same specifications.
  • Washing Machine Manual: Consult your specific LG washing machine's user or service manual for error codes and model-specific troubleshooting guides.
  • Professional Assistance: If issues persist, it is recommended to contact a certified appliance repair technician.

7. Specifications

FeatureDetail
Product TypeWashing Machine Computer Board (Mainboard)
Brand CompatibilityLG Drum Washing Machines
Model NumbersEAX65392311-G, EBR80578811, EBR80578814, EBR805788 Series
OriginMainland China
Dimensions (L x W x H)35 cm x 15 cm x 10 cm (approximate)
Weight1.9 kg (approximate)
Fuse SpecificationT6A L 250V (as observed on board)

8. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer at the time of purchase. For technical support or further assistance, contact the seller or a qualified appliance service professional.

9. User Tips

  • Verify Model Numbers: Always double-check the exact model number of your existing mainboard (e.g., EAX65392311-G or EBR805788XX) against the replacement part to ensure compatibility before purchase and installation. Slight variations can lead to functional issues.
  • Static Discharge: Before handling the board, discharge any static electricity from your body by touching a grounded metal object. This prevents damage to sensitive electronic components.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.