YiFanHeRong G20S/G20S Pro/G20BTS Plus

Contents

G20S/G20S Pro/G20BTS Plus Voice Remote Control User Manual

Models: G20S, G20S Pro, G20BTS, G20S Pro BT

1. Product Overview

The G20S series of voice remote controls offers a versatile solution for controlling various smart devices. These remotes feature 2.4GHz wireless connectivity, gyroscope-based air mouse functionality, and voice control (model dependent). Some models also include Bluetooth 5.0 connectivity and backlighting for enhanced usability.

Front, side, and top view of the G20 Pro remote control

Figure 1: G20 Pro Remote Control Views

Product Variants

  • G20S: USB 2.4G, Gyroscope, Voice Control. No Backlight.
  • G20BTS: Bluetooth-Compatible, Gyroscope. No Voice Control, No Backlight.
  • G20S Pro: USB 2.4G, Gyroscope, Voice Control, Backlit.
  • G20S Pro BT: USB 2.4G + BT 5.0, Gyroscope, Voice Control, Backlit.

Key Features

  • Motion Sensing: Equipped with a gyroscope core compensation algorithm for precise gesture control, anti-tremor, and anti-shake functionality.
  • Voice Control: Built-in high-fidelity voice microphone for voice assistant commands (feature availability varies by model and connection mode).
  • Multi-Layer Spraying Process: Laser fine carving for durable, distinguishable characters and excellent hand feel.
  • Wide Compatibility: Suitable for TV boxes, projectors, smart TVs, mobile phones, tablets, computers, and all-in-one PCs.
Product application examples including TV Box, Raspberry Pi, Projector, Smart TV, Cell phone, Tablet, Computer, All-in-one PC, HTPC

Figure 2: Product Application Examples

2. Setup

2.1 Battery Installation

  1. Open the battery compartment cover on the back of the remote control.
  2. Insert two AAA batteries, ensuring correct polarity (+/-).
  3. Close the battery compartment cover securely.
Battery compartment showing AAA battery installation

Figure 3: AAA Battery Installation

2.2 Connecting the Remote Control

2.2.1 2.4G Wireless Mode (All models except G20BTS)

  1. Insert the USB Nano Receiver into an available USB port on your device (e.g., Android TV Box, PC).
  2. The remote control should automatically connect. The LED indicator may flash briefly and then turn off or remain solid, indicating a successful connection.
Nano receiver, ready for work once plugged

Figure 4: USB Nano Receiver

2.2.2 Bluetooth Mode (G20BTS and G20S Pro BT)

For G20S Pro BT, if the USB dongle is inserted, it will work in 2.4G mode. To use Bluetooth mode, disconnect the USB receiver.

  1. Clear Code Information (Recommended before pairing): Press and hold the [OK] + [Return] buttons simultaneously until the indicator light flashes. This clears previous pairing data.
  2. On your device (e.g., Android TV Box with ATV system), navigate to Bluetooth settings.
  3. Search for available devices. The remote control should appear as "G20S Pro" or similar.
  4. Select the remote control to pair.
Instructions for pairing G20S Pro BT in Bluetooth mode, showing OK and Return buttons

Figure 5: Bluetooth Pairing for G20S Pro BT

3. Operating Instructions

3.1 Button Functions

Refer to the diagrams below for a detailed layout of buttons and their functions for each model.

Diagram of the G20S Pro BT remote with button labels

Figure 6: G20S Pro BT Button Layout

Diagram of the G20S Pro remote with button labels

Figure 7: G20S Pro Button Layout

Diagram of the G20BTS remote with button labels

Figure 8: G20BTS Button Layout

Diagram of the G20S remote with button labels

Figure 9: G20S Button Layout

3.2 Air Mouse Function

The remote control is equipped with a gyroscope for motion sensing. Move the remote in the air to control the cursor on your screen. Press the 'Mouse On/Off' button to toggle the air mouse function.

Adjusting Mouse Speed (G20BTS)

The G20BTS model offers 3-level adjustable mouse speed:

  • Slower Speed: Hold the OK button and then press VOL-. The LED light will change from blinking to solid upon successful adjustment.
  • Faster Speed: Hold the OK button and then press VOL+. The LED light will change from blinking to solid upon successful adjustment.
Instructions for adjusting mouse speed on G20BTS remote

Figure 10: Mouse Speed Adjustment

3.3 Voice Control Function

Press the 'Open Voice Assistant' button (microphone icon) to activate voice input. Speak your commands clearly into the built-in microphone.

Remote with voice assistant icon, showing built-in high fidelity voice microphone

Figure 11: Voice Control Activation

Note on Voice Functionality:

  • In Bluetooth mode, the voice function primarily supports devices running an ATV system (e.g., Android 10 ATV).
  • In 2.4G mode, the voice function supports most Android devices that have voice capabilities.

3.4 Backlight Function (G20S Pro, G20S Pro BT)

For models with backlighting, press and hold the 'Menu' button for 3 seconds to turn the backlight on or off.

Backlight feature for G20S Pro, showing how to activate it by pressing and holding the menu button

Figure 12: Backlight Activation

3.5 IR Learning Function (Power Button)

This feature allows you to program the remote's 'Power' button to control the power of another infrared device, such as your TV.

  1. Press and hold the Power button on the G20S remote for 3 seconds. The red indicator light will flash slowly, indicating it has entered the IR learning state.
  2. Position the infrared remote control (e.g., your TV remote) and the G20S remote head-to-head, about 2-3 cm apart.
  3. Press the Power button on your original infrared remote control. When the G20S remote receives the infrared code, its red indicator light will go out after flashing, indicating successful programming.
  4. After successful learning, the product will automatically store the code and exit the learning mode.
  5. To clear the infrared code values, press OK + DEL.
Detailed instructions for IR Learning of the Power button

Figure 13: IR Learning Process

Note:

  • Only the Power and Mute buttons can be programmed via IR learning.
  • IR learning may not be compatible with all brands and models of TVs or other devices.

4. Maintenance

4.1 Battery Replacement

When the low battery indicator flashes slowly, it's time to replace the batteries. Follow the steps in Section 2.1 to replace the two AAA batteries.

Low battery indicator showing a battery icon with 10% charge and flashing

Figure 14: Low Battery Indicator

4.2 Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.

5. Troubleshooting

5.1 General Issues

  • Remote not responding: Check battery levels and ensure they are inserted correctly.
  • Cursor erratic or unresponsive: Ensure the remote is within the effective distance (>10M). Recalibrate the gyroscope by placing the remote on a flat surface for a few seconds.

5.2 Connectivity Issues

  • 2.4G connection problems: Ensure the USB Nano Receiver is securely plugged into the device. Try a different USB port.
  • Bluetooth connection problems (G20BTS, G20S Pro BT):
    1. Ensure the USB receiver is disconnected if using G20S Pro BT in Bluetooth mode.
    2. Clear previous pairing data by holding [OK] + [Return] buttons.
    3. Re-attempt pairing through your device's Bluetooth settings.
    4. Note that Bluetooth mode may not be compatible with all devices due to varying Bluetooth module implementations.

5.3 Voice Control Not Working

  • In Bluetooth mode: Voice function primarily supports ATV systems. If your device is not an ATV system, voice control may not work in Bluetooth mode.
  • In 2.4G mode: Ensure your Android device supports voice input.
  • Check if the microphone is obstructed or if there's excessive background noise.

5.4 IR Learning Failure

  • Ensure the original remote's power button is functional.
  • Maintain a distance of 2-3 cm between the remotes during learning.
  • Ensure the remotes are pointed directly at each other.
  • Some IR codes may not be compatible.

5.5 Reset to Factory Settings

To restore the remote to its factory settings, press OK + DEL simultaneously.

6. Specifications

Product parameters table with dimensions and specifications

Figure 15: Product Parameters

ParameterG20BTS Plus Air MouseG20BTS
Weight55g50g
Mode2.4G & BT5.0GFSK
Frequency2400-2483.5GHz
Distance>10M
Voltage3.0V
Working Current<15mA<5mA
Standby Current<20uA
Battery TypeAAA*2AAA*2 (not included)
Dimensions (L x W x H)160mm x 42mm x 18mm (approximate for G20S Pro BT)

7. User Tips

  • Remember that only the Power and Mute buttons are programmable for IR learning.
  • This air mouse is primarily designed for Android TV boxes. Compatibility with some smart TVs may be limited.
  • If you have the G20S Pro BT model and wish to use Bluetooth, ensure the USB receiver is unplugged.
  • Voice control functionality can differ between Bluetooth and 2.4G modes, and also depends on your device's operating system (ATV systems for Bluetooth voice).
  • If your mouse cursor feels too slow or fast, adjust its speed by holding the OK button and pressing VOL- or VOL+ respectively.

8. Warranty and Support

This product comes with a 1-month free replacement period from the date of receipt. Additionally, a one-year free maintenance service is provided. For replacement or maintenance, the product must be returned in its original condition, and the buyer is responsible for shipping costs. If parts need to be replaced during maintenance, the buyer will be responsible for the cost of those parts.

For further assistance or support, please contact your retailer or the manufacturer directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.