U`King 2000W RGB LED Smoking Machine

1. Introduction

Thank you for choosing the U`King 2000W RGB LED Smoking Machine. This powerful and versatile fog machine is designed to create stunning atmospheric effects for various events such as weddings, parties, and stage performances. Featuring dual tube output, adjustable smoke spray angle, and vibrant RGB LED lighting, it offers dynamic visual experiences. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Safety Information

Please read all safety notices carefully before operation to prevent electric shock and ensure excellent performance.

General Safety Precautions:

• Keep the machine clean.
• For indoor use only.
• Ensure the power supply matches the specified voltage (AC110V-120V or 220V-240V, 50-60Hz).
• Always power off before adding fog liquid.
• Place the machine horizontally; do not incline or place upside down.
• Power off or unplug the machine after use.
• This product is not waterproof. If humidity, water, or fog liquid enters the machine, switch off the power immediately and contact your distributor.
• There are no user-serviceable spare parts. For repairs, contact your distributor or professional repair services.

Avoid Fire Hazards:

• Operate only by adults. Keep out of reach of children and supervise during operation.
• Do not spray fog directly at people. Keep away from open flames.
• Maintain a minimum distance of 100cm between the machine and other materials. (The surface temperature of the machine can reach 40-80℃; do not touch during operation).
• Place the machine in a well-ventilated area. Do not cover cooling vents to ensure proper heat dissipation.
• Maintain a minimum clearance of 20cm between the fog machine and surrounding objects, and 20cm between the smoke output and any tinder. Ensure no easily combustible materials (e.g., carpet, wood, flammable liquids) are within 300cm of the fog output.

Avoid Explosion Hazards:

• Never add flammable liquids such as oil, gas, or perfume to the fog machine.
• Strictly adhere to all warning signs and operating instructions on the machine.
• Use only high-quality fog liquid recommended by distributors. Low-quality fog liquid can cause explosions or spray oil.
• Regularly check that there is sufficient fog liquid in the reservoir.
• Empty all fog liquid before transporting or shipping the machine.
• Do not ingest fog liquid. If contact occurs with skin or eyes, wash immediately with clean water and seek medical attention if irritation persists.

3. Package Contents

Please verify that all items are present and in good condition upon unpacking:

• 1 x U`King 2000W RGB LED Smoking Machine
• 1 x Power Cord
• 1 x Signal Line (DMX cable)
• 1 x Remote Control
• 1 x Cone Needle (for cleaning)
• 1 x Instruction Manual

4. Specifications

5. Setup

Follow these steps to set up your U`King 2000W RGB LED Smoking Machine:

1. **Unpack:** Carefully remove all packaging materials, paying special attention to the spray mouth area.
2. **Position:** Place the machine on a stable, horizontal surface. Ensure it is not inclined or placed upside down. Refer to the safety guidelines for proper clearance from walls and flammable materials.
3. **Add Fog Liquid:** Open the cover of the liquid reservoir. Pour high-quality fog liquid into the tank. Ensure the liquid is specifically designed for fog machines. Using low-quality or incorrect liquid can damage the machine. Securely screw the cover back onto the liquid reservoir.
4. **Connect Power:** Connect the power cord to the machine's power input and then to a suitable electrical outlet.
5. **Connect Remote/DMX (Optional):** If using the remote control, plug its console into the designated socket at the back of the machine. If using DMX control, connect your DMX controller to the DMX IN port using a signal line.

6. Operating Instructions

Once the machine is set up, follow these steps to operate it:

1. **Power On:** Flip the red 'ON/OFF' switch to the 'ON' position. The machine will begin its warm-up cycle.
2. **Warm-up:** Allow approximately 3 minutes for the machine to warm up. The display will indicate when it's ready for operation.
3. **Control Modes:** You can control the fog machine using one of the following methods:
   • **Manual Control:** Use the 'MENU', 'UP', 'DOWN', and 'ENTER' buttons on the machine's control panel to navigate settings and activate fog.
   • **Remote Control:** Pull out the small plastic sheet from the remote control to activate it. Use the 'No' key to emit smoke and 'OFF' to stop. Press any color key to control the LED lights.
   • **DMX Control:** Connect a DMX512 controller to the DMX IN port. The machine supports 13 DMX channels for advanced control over fog output and RGB LED lighting. Refer to your DMX controller's manual for specific programming.
4. **Adjusting Effects:**
   • **Smoke Spray Angle:** The smoke spray angle is adjustable to direct the fog as needed.
   • **Color Mixing:** The 8+8 RGB 3in1 LEDs allow for a wide range of color mixing, with two sets of LEDs capable of emitting different colors simultaneously.

7. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your fog machine:

1. **Timely Cleaning:** Clean the fog machine regularly to prevent damage to internal components and reduce potential repair costs.
2. **Keep Clean:** Ensure the machine remains free from dirt and debris. Always screw the cover onto the liquid reservoir after adding fog liquid to prevent contamination.
3. **Refractory Pipe Cleaning:** After approximately 40 hours of continuous use, clean the refractory pipe. Prepare a cleaning solution of 80% distilled water and 20% white vinegar. Run this solution through the machine to flush out residue.
4. **Spray Mouth Cleaning:** Disassemble the spray mouth and clean it with vinegar to ensure it remains clear and unobstructed before heating.
5. **Reassembly:** After cleaning and allowing components to cool completely, reassemble the spray mouth. Add fresh fog liquid for the next use.

8. Troubleshooting

If you encounter issues with your fog machine, refer to the following common problems and solutions:

9. User Tips

No specific user tips were available from the provided reviews or Q&A content for this product.

10. Warranty and Support

The U`King 2000W RGB LED Smoking Machine comes with a warranty period of 3 months to 1 year, depending on the specific terms of purchase. For any technical support, repair services, or warranty claims, please contact your original distributor or the seller directly. Do not attempt to open or repair the device yourself, as this may void your warranty and pose safety risks.