1. Introduction
This manual provides detailed instructions for the safe and effective use of your 200W COB Linear Spotlight. This versatile RGBWA UV 6-in-1 COB Par Light is designed for professional stage, party, concert, and wedding lighting applications, offering a wide range of colors and control options. Please read this manual thoroughly before operating the device and retain it for future reference.
2. Safety Information
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.
- Ensure the power supply voltage matches the device's requirements (AC110V-240V 50/60Hz).
- Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Keep the device away from moisture, rain, and liquids.
- Ensure proper ventilation to prevent overheating. Do not block ventilation openings.
- Avoid direct eye exposure to the light source, as it can cause eye damage.
- Mount the fixture securely using appropriate clamps and safety cables.
- Disconnect from power before cleaning or servicing.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- 1 x 200W COB Linear Spotlight (Machine)
- 1 x Power Cord
- 2 x Handle Knob/Spacer
- 1 x Handle
- 1 x Signal Cable (DMX cable)
- 1 x Instruction Manual
4. Specifications
| Feature | Detail |
|---|---|
| Model | ZQ09013 |
| Shell Color | Black |
| Material | Aluminum + Iron |
| Input Voltage | AC110V-240V 50/60Hz |
| Rated Power | 200W |
| Light Source | 1PCS 200W 6-in-1 RGBWA+UV COB |
| Output Light Angle | 65° |
| Control Protocol | Standard DMX512 protocol, RDM protocol |
| LED Average Lifespan | 50000 hours |
| Operation Modes | Automatic, Voice Control, DMX, Master-Slave, Remote Control |
| Lamp Output Luminous Flux | 8000-10000LM |
| Dimming Curve | 0-100% linear dimming |
| Control Channel | 6/10 CH |
| Data Connection | 3-pole XLR input/output |
| Display | 4-digit digital display |
| Protection Grade | IP20 |
| Working Environment | -20℃ to 45℃ |
| Dimensions (Approx.) | Height: 21cm (8.27in), Length: 22.5cm (8.86in), Width: 20cm (7.87in), Barn Door Depth: 5.5cm (2.17in) |
The product is certified with CE and RoHS standards.
5. Setup
5.1 Unpacking and Inspection
Carefully remove the fixture from its packaging. Ensure all components listed in the "Package Contents" section are present and undamaged. If any damage is observed, do not operate the device and contact your supplier.
5.2 Mounting
The spotlight comes with a handle for easy positioning and mounting. Secure the handle using the provided knobs/spacers. The fixture can be rotated 360 degrees for optimal light direction.
Image: Adjustable barn doors and the 360-degree rotation mechanism for precise light positioning.
5.3 Connections
Refer to the diagram below for connection points:
Image: Rear panel showing DMX IN/OUT, Power IN/OUT, and control buttons (MENU, ENTER, UP, DOWN).
- Power Connection: Connect the provided power cord to the "POERR IN" port and then to a suitable power outlet (AC110V-240V 50/60Hz). If linking multiple units, use the "POERR OUT" port to daisy-chain power to the next fixture.
- DMX Connection: For DMX control, connect a 3-pole XLR DMX cable from your DMX controller's output to the "DMX IN" port of the first fixture. To control multiple fixtures, connect the "DMX OUT" of the first fixture to the "DMX IN" of the next, and so on.
6. Operation
6.1 Control Panel
The fixture features a 4-digit digital display and control buttons (MENU, ENTER, UP, DOWN) on the rear panel for mode selection and parameter adjustment.
6.2 Operation Modes
The spotlight supports various operation modes to suit different event requirements:
Image: Visual representation of the various control modes available.
- RGBWA UV: Direct control over Red, Green, Blue, White, Amber, and UV colors for custom color mixing.
- Auto: Pre-programmed light shows that run automatically.
- Strobe: Creates a flashing light effect.
- Sound Activated: Reacts to music or sound via a built-in microphone.
- Jump: Rapid color changes.
- DMX: Professional control using a DMX512 controller (6 or 10 channels).
- Master-Slave: Link multiple fixtures where one acts as the master and others follow its program.
- Fade: Smooth transitions between colors.
6.3 Color Mixing and Dimming
The 6-in-1 COB light source allows for a broad spectrum of colors by mixing Red, Green, Blue, White, Amber, and UV. The fixture supports 0-100% linear dimming for precise brightness control.
Image: Examples of the distinct colors achievable with the RGBWA UV 6-in-1 COB light source.
6.4 Barn Doors
The unique 4-leaf barn door design allows for flexible adjustment up to 180° to precisely shape and direct the light beam, minimizing spill and focusing illumination where needed.
Image: The 200W COB light source providing a 60° ultra-wide angle illumination.
7. Maintenance
- Cleaning: Regularly clean the lens and housing with a soft, lint-free cloth to maintain optimal light output and prevent dust buildup. Ensure the device is unplugged before cleaning.
- Inspection: Periodically check all cables, connections, and mounting hardware for any signs of wear or damage. Replace any damaged components immediately.
- Storage: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected, outlet faulty, fuse blown. | Check power cable connection, test outlet, replace fuse if accessible (refer to qualified technician). |
| No DMX control | Incorrect DMX address, faulty DMX cable, DMX controller issue, incorrect DMX mode. | Verify DMX address and channel mode settings on the fixture and controller. Check DMX cable for damage. Ensure DMX controller is functioning correctly. |
| Light output is weak or inconsistent | Dimmer setting too low, incorrect mode, overheating. | Adjust dimmer settings. Select appropriate operation mode. Ensure adequate ventilation and clear any obstructions. |
| Fixture not responding to sound | Sound activated mode not selected, microphone sensitivity too low, no sound input. | Ensure "Sound Activated" mode is selected. Increase microphone sensitivity if adjustable. Provide clear audio input. |
9. User Tips
- Experiment with different operation modes (Auto, Sound Activated, DMX) to achieve desired lighting effects for your event.
- Utilize the 4-leaf barn doors to precisely direct light and minimize spill, enhancing the visual impact of your stage or venue.
- For optimal performance and longevity, ensure the fixture is used within its specified working environment temperature range (-20℃ to 45℃).
10. Warranty and Support
This product is manufactured to high-quality standards and is designed for reliable performance. For any technical assistance, troubleshooting beyond this manual, or inquiries regarding warranty, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
