Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Mould King 10210 V12 Naturally Aspirated Engine Building Blocks set. This technical model allows you to construct a realistic V12 engine, replicating its mechanical layout and providing an engaging building experience. The assembled model features an intelligent core drive with motor control and a sophisticated power transmission mechanism, including functional gears.
Safety Warnings
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product contains small parts and is not suitable for children under 3 years old due to choking hazards. Recommended age for assembly and use is 14+.
Package Contents
Before beginning assembly, please verify that all components are present and undamaged. The package typically includes:
- 1366+ building block pieces for the V12 engine model
- 1x L Motor
- 1x Battery Box
- Detailed assembly instructions (usually a printed manual within the box)
Setup and Assembly
The primary setup for this product involves the assembly of the V12 engine model using the provided building blocks. Follow the step-by-step instructions included in your product box carefully.
Assembly Guidelines:
- Unpack and Organize: Carefully unpack all components. It is recommended to sort the building blocks by type, color, or size to facilitate the assembly process.
- Follow Instructions: Refer to the dedicated assembly manual provided in the package. Each step is illustrated to guide you through the construction of the V12 engine.
- Motor and Battery Box Integration: During assembly, integrate the L Motor and battery box as indicated in the instructions. Ensure proper connection for the motor's functionality.
- Check Connections: After each major section of the build, double-check that all blocks are securely connected to prevent the model from falling apart.
Operating the V12 Engine Model
Once fully assembled and the battery box is powered, your V12 engine model can be operated. The model features a functional gear system and motor control.
Motor Control:
- Ensure batteries (not included) are correctly installed in the battery box.
- Activate the motor using the switch on the battery box or a remote control if one is included (refer to your specific assembly manual for details on remote control, if applicable).
- The motor drives the internal components of the engine, simulating real engine movement.
Gear Shifting:
The model includes a sophisticated power transmission mechanism with multiple gears:
- Low Speed Gear
- Medium Speed Gear
- High Speed Gear
- Hyper Speed Gear
Use the integrated lever mechanism to shift between these gears, observing the change in the engine's operational speed and the movement of the fan/propeller.
Maintenance
To ensure the longevity and proper functioning of your Mould King V12 Engine model, follow these maintenance guidelines:
- Cleaning: Dust the model regularly with a soft, dry cloth or a soft brush. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
- Battery Care: If the model will not be used for an extended period, remove the batteries from the battery box to prevent leakage and damage.
- Handling: Handle the model with care to avoid accidental disassembly or damage to delicate parts.
Troubleshooting
If you encounter issues with your V12 Engine model, consider the following:
Motor Not Functioning:
- Check Batteries: Ensure batteries are correctly inserted and have sufficient charge. Replace if necessary.
- Check Connections: Verify that the L Motor is securely connected to the battery box and that all wiring (if visible) is intact.
- Obstructions: Inspect for any loose blocks or debris that might be obstructing the motor's movement or the gear system.
Parts Missing or Damaged:
- Review Package Contents: Double-check the package contents against the parts list in your assembly manual.
- Contact Support: If parts are genuinely missing or damaged upon arrival, contact Mould King customer support or the seller for assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | MOULD KING |
| Model Number | 10210 |
| Particle Count | 1366 pcs |
| Dimensions (L x W x H) | 38 cm x 18 cm x 17.2 cm |
| Material | ABS Plastic |
| Recommended Age | 14+ |
| Block Size | Small building block (Compatible with Lego) |
| Plastic Block Shape | Self-Locking Bricks |
| Gender | Unisex |
| Origin | Mainland China |
| Power Source | 1x L Motor, 1x Battery Box (batteries not included) |
User Tips
- Patience is Key: Building complex models requires patience. Take your time with each step to ensure accuracy.
- Organize Parts: Before starting, sort all pieces into small containers or bags. This will significantly speed up the building process and reduce frustration.
- Double-Check Steps: If a section doesn't seem right, retrace your steps and verify against the instructions. It's easier to correct mistakes early on.
- Test Functionality: Periodically test the motor and gear mechanisms during the build, especially before enclosing them, to ensure they are working correctly.
Warranty and Support
For any issues regarding missing parts, defective components, or assembly difficulties not covered in this manual, please contact the seller or Mould King customer service directly. Keep your proof of purchase for warranty claims.
The "Bri X pert" mark on your product signifies its uniqueness and originality, ensuring a high-quality building experience from Mould King's innovative team.
