1. Product Overview
The GAX-TK16 is a professional 16-channel audio mixing console designed for various audio applications, including recording studios, broadcasting rooms, live video streams, and home use. It features a built-in 99 digital effects processor, Bluetooth 5.0 connectivity, USB and SD card reader support, and phantom power supply for condenser microphones. This mixer offers precise control over audio signals with its multi-way adjustment capabilities and a 7-band stereo graphic equalizer.

Figure 1: GAX-TK16 Professional 16 Channel Mixing Console
Key Features:
- 16-channel input (8 mono microphone inputs)
- Stereo output
- Built-in 99 Digital Signal Processing (DSP) effects
- High, Mid, Low EQ on each channel for professional three-stage balanced regulation
- 48V phantom power supply per channel
- Mute function per channel
- AUX output
- Multi-functional MP3 player with recording and Bluetooth function
- MP3 high/low adjustable
- Soundcard function (PC recording)
- 7-band EQ on main output
- 60mm faders for precise volume adjustment
- FX to AUX routing
2. Setup Guide
2.1 Unpacking and Inspection
Carefully remove the mixing console from its carton box packaging. Inspect the unit for any signs of damage during transit. Ensure all accessories, including the inbox adaptor, are present.

Figure 2: Product Dimensions and Weight
2.2 Power Connection
- Ensure the power switch on the rear panel of the mixer is in the 'OFF' position.
- Connect the provided AC power cable to the power interface on the rear of the mixer.
- Plug the other end of the power cable into a suitable AC power outlet (AC110V/AC220V, 50-60Hz).
- Turn on the power switch. The power indicator light should illuminate.

Figure 3: Rear Panel with Power Connection
2.3 Connecting Audio Devices
The GAX-TK16 supports various input and output connections. Refer to the panel diagram for specific port locations.

Figure 4: Mixer Panel Diagram and Functional Characteristics

Figure 5: Device Compatibility and Connector Types
- Microphones/Line Inputs: Connect microphones (XLR or 6.35mm jack) or line-level instruments to the input channels (1-8). For condenser microphones requiring phantom power, activate the +48V switch.
- Main Output: Connect your main speakers or amplifier to the 'MAIN OUT' (XLR or 6.35mm jack) ports.
- Auxiliary Output: Use the 'AUX OUT' (6.35mm jack) for sending signals to external effects processors or monitor speakers.
- Headphones: Connect headphones to the 'PHONE' (6.35mm jack) output for monitoring.
- USB/SD Card: Insert a USB drive or SD card into the respective slots for MP3 playback or recording.
- Bluetooth: Activate Bluetooth mode on the mixer and pair with your mobile device for wireless audio input.
3. Operating Instructions
3.1 Channel Control
Each input channel features dedicated controls:
- GAIN: Adjusts the input sensitivity for the connected microphone or instrument.
- HIGH/MID/LOW EQ: Three-band equalizer to shape the tone of each channel. Adjust these knobs to customize your sound.
- AUX: Controls the amount of signal sent to the auxiliary output.
- FX: Controls the amount of signal sent to the internal DSP effects processor.
- PAN: Adjusts the stereo position (left/right) of the channel signal.
- MUTE: Silences the individual channel.
- FADER: The 60mm fader precisely controls the output volume of the channel.

Figure 6: Channel Input and Equalizer Controls

Figure 7: Channel Faders and DSP Section
3.2 DSP Effects
The mixer includes 99 built-in digital effects. Use the 'PROGRAM' knob to select an effect and the 'FX' knob on each channel to send signal to the effect processor.

Figure 8: 99 Professional DSP Reverb Effects
Available Effects:
- 0-9 Hall
- 10-19 Room
- 20-29 Delay
- 30-39 Ping-pong
- 40-49 Echo
- 50-59 Reverberation
- 60-69 Carrageenan
- 70-79 Pitch
- 80-84 Chorus
- 85-89 Tremolo
- 90-94 Flange
- 95-99 Auto Tune
3.3 MP3 Player and Recording
The mixer supports MP3 playback from USB drives or SD cards. It also functions as a soundcard for PC recording.
- Playback: Insert a USB drive or SD card with MP3 files. Use the MP3 EQ controls (High/Low) and transport buttons (Play/Pause, Next/Previous) to manage playback.
- Recording: Connect the mixer to a computer via USB. The mixer will be recognized as an audio interface, allowing you to record the mixed audio directly to your PC.
3.4 Bluetooth Connectivity
To connect a mobile device via Bluetooth:
- Ensure Bluetooth is enabled on your mobile device.
- Select Bluetooth mode on the mixer's MP3 player section.
- Search for the mixer on your mobile device's Bluetooth settings and pair.
- Once connected, audio from your mobile device will play through the mixer.

Figure 9: Mobile Live Streaming Connection
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your GAX-TK16 mixing console.
- Cleaning: Use a soft, dry cloth to clean the surface of the mixer. Avoid using abrasive cleaners or solvents that may damage the finish or controls.
- Dust Protection: Keep the mixer covered when not in use to prevent dust accumulation, especially on faders and knobs.
- Environmental Conditions: Operate the mixer in a dry, well-ventilated area away from direct sunlight, heat sources, and excessive moisture.
- Power Off: Always turn off the mixer and disconnect it from the power supply when not in use or during electrical storms.
- Fuse Replacement: In case of a power issue, check the AC input fuse on the rear panel. Replace with the same type and rating fuse only. Disconnect the power supply cord before changing the fuse.
5. Troubleshooting
Common Issues and Solutions:
- No Power:
- Check if the power cable is securely connected to both the mixer and the power outlet.
- Ensure the power switch is in the 'ON' position.
- Verify the power outlet is functional.
- Check and replace the AC input fuse if blown (refer to Maintenance section).
- No Sound Output:
- Ensure the main output faders (L/R) are up.
- Check individual channel faders and mute buttons.
- Verify connections to speakers/amplifiers.
- Check input gain levels for each channel.
- Ensure the correct input source (e.g., USB, Bluetooth, Line) is selected if applicable.
- Distorted Sound:
- Reduce input GAIN levels to prevent clipping (indicated by 'PK' lights).
- Check the main output level and adjust if too high.
- Ensure cables are in good condition and correctly connected.
- Bluetooth Connection Issues:
- Ensure the mixer is in Bluetooth pairing mode.
- Disable and re-enable Bluetooth on your mobile device.
- Move closer to the mixer to ensure a strong signal.
- Forget the device on your mobile and try pairing again.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | GAX-TK16 |
| Brand Name | recordio |
| Product Name | Mixing Console |
| Input Channels | 16 (8 mono microphone inputs) |
| Output Signal | Stereo |
| Power Source | AC (110V/220V, 50-60Hz) |
| Built-in Battery | No |
| Inbox Adaptor | Yes |
| Phantom Power | 48V per channel |
| DSP Effects | 99 Digital Effects (Hall, Room, Delay, Echo, Chorus, Flange, etc.) |
| Equalizer | 3-band EQ per channel, 7-band stereo graphic EQ on main output |
| Frequency Range (Hz) | 110Hz-8KHz, 80Hz |
| Distortion | ≤0.02%@0dB 1KHz |
| Signal-to-Noise Ratio (S/N) | >90dB |
| Connectivity | Bluetooth 5.0, USB, SD Card Reader |
| Recording Function | Soundcard function (PC recording) |
| Faders | 60mm stroke pushers |
| Dimensions (L x W x H) | 62.3 x 12 x 35.5 cm (Product), 65 x 15 x 37 cm (Package) |
| Weight | 4.8 kg (Package) |
| Packing | Carton Box |
| Certification | CE |
| Origin | Mainland China |
| Application | Disco, Bar, Club, Home, Recording, Broadcasting, Live Streaming |
7. Warranty and Support
Your GAX-TK16 mixing console comes with a 1-year warranty from the date of purchase.

Figure 10: Warranty Information
Warranty Terms:
- A 1-year warranty is provided from the date of purchase.
- If you receive a different or damaged item, please contact the seller immediately before giving any feedback or opening a dispute.
- Important: Do not disassemble the product. Disassembly will void the one-year warranty.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact the seller directly. Provide your purchase details and a clear description of the issue for prompt support.
Video 1: Product Demonstration and Features Overview
8. User Tips
While specific user reviews and Q&A content were not provided, here are some general tips for optimizing your experience with the GAX-TK16 mixing console:
- Gain Staging: Always set your input gain levels carefully. Start with the gain low and gradually increase it until the 'PK' (Peak) indicator lights up only occasionally on the loudest parts of your signal. This prevents distortion.
- EQ Usage: Use the EQ to enhance your sound, not just to fix problems. A little goes a long way. Experiment with the High, Mid, and Low controls to find the sweet spot for each instrument or vocal.
- Effects Exploration: The 99 DSP effects offer a wide range of creative possibilities. Take time to experiment with different effects and parameters to find what works best for your mix.
- Cable Management: Keep your cables organized and use high-quality, shielded cables to minimize noise and interference.
- Software Compatibility: When using the mixer as a soundcard for PC recording, ensure your recording software (DAW) is correctly configured to recognize the mixer as its audio input/output device.