1. Introduction
The GEYA GPS6-VAK Overvoltage & Undervoltage Protector is a sophisticated device designed to safeguard your electrical circuits and connected appliances from harmful voltage fluctuations. This moulded case protector offers reliable protection against both overvoltage and undervoltage conditions, ensuring the longevity and safe operation of your electrical systems in both home and industrial environments. It also features overcurrent protection and real-time display of voltage, current, and power consumption (kWh).

2. Specifications
Below are the technical specifications for the GEYA GPS6-VAK Protector:
| Parameter | Value |
|---|---|
| Supply Terminals | N, L |
| Rated Supply Voltage | AC 220V |
| Rated Frequency | 50/60Hz |
| Overvoltage Setting Range (>V) | AC 240-300V |
| Undervoltage Setting Range (<V) | AC 140-230V |
| Voltage Hysteresis | 5V |
| Overvoltage Trip Delay | 0.5s |
| Voltage Accuracy | <1% |
| Max. Operating Phase Voltage | 350V |
| Max. Operating Current | 40A / 63A / 80A / 100A (model dependent) |
| Altitude | ≤2000m |
| Delay Time (Recovery/Start) | 5-300s |
| Permissible Relative Humidity | ≤50% at 40°C (without condensation) |
| Ambient Temperature | -25°C ~ +55°C |
| Size (H x W x D) | 86mm x 38mm x 67.5mm (approx.) |


3. Installation
The GEYA GPS6-VAK Protector is designed for easy installation as a moulded case device. It should be installed by a qualified electrician in accordance with local electrical codes and regulations.
3.1 Wiring Diagram
Connect the device as shown in the wiring diagram below. Ensure proper connection of the Neutral (N) and Live (L) lines for both input and output.

Caution: All electrical work must be installed by qualified electricians. All parts and pre-electrical connections of the product shall comply with the appropriate safety standards.
4. Operation and Function Setting
The protector features a digital display and control buttons for setting various parameters.
4.1 Front Panel Controls
- SET: Used for menu selection and saving settings.
- ▲ (Up/Digit+): Used to increase values or navigate up in menus.
- ▼ (Down/Digit-): Used to decrease values or navigate down in menus.
- ⏻ (ON/OFF): Power button.
4.2 Setting Instructions
To enter the setting mode and modify parameters:
- Enter Setting State: Long press the SET button for approximately 5 seconds. The display will show "P-1" indicating the first setting parameter.
- Navigate Parameters: Use the ▲ (Up) and ▼ (Down) buttons to cycle through the setting parameters (P-1 to P-8).
- Modify Values: When on a desired parameter (e.g., P-1 for Overvoltage Setting), press SET briefly to select it. Then use the ▲ (Up) and ▼ (Down) buttons to adjust the value.
- Save Settings: After adjusting a value, press the SET button again to save the change and move to the next digit or exit the current parameter's adjustment. To save all changes and exit the setting mode, long press the SET button.
Note: To quickly adjust values for longer periods of time, press either the "Up" or "Down" button continuously.
4.3 Setup Menu Parameters
| Parameter | Description | Range/Default |
|---|---|---|
| P-1 | Overvoltage Setting | 240-300V |
| P-2 | Overvoltage Delay Time | 5-300s |
| P-3 | Undervoltage Setting | 140-230V |
| P-4 | Undervoltage Delay Time | 5-300s |
| P-5 | Overcurrent Setting | 40A / 63A / 80A / 100A (Adjustable based on model) |
| P-6 | Undervoltage Recovery Delay Time | 5-300s |
| P-7 | Starting Delay Time | 5-300s |
| P-8 | Reset Power / Show kWh | 0000 (Reset kWh) |

5. Maintenance
The GEYA GPS6-VAK Protector is designed for long-term, reliable operation with minimal maintenance. Follow these guidelines to ensure optimal performance:
- Regular Inspection: Periodically check the device for any visible damage, loose connections, or signs of overheating.
- Cleaning: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners or solvents.
- Environmental Conditions: Ensure the operating environment remains within the specified ambient temperature and humidity ranges to prevent malfunction.
- Professional Check: For any suspected malfunction or significant changes in performance, consult a qualified electrician.
6. Troubleshooting
If you encounter issues with your GEYA GPS6-VAK Protector, consider the following common troubleshooting steps:
- Device Not Powering On:
- Check the main power supply to the device.
- Ensure all wiring connections (N and L input) are secure and correct.
- Frequent Tripping (Overvoltage/Undervoltage):
- Verify that the Overvoltage (P-1) and Undervoltage (P-3) settings are appropriate for your local grid conditions.
- Check the actual line voltage with a multimeter to confirm if the voltage is indeed outside the set limits.
- Adjust the Overvoltage Delay Time (P-2) and Undervoltage Delay Time (P-4) if brief, harmless fluctuations are causing nuisance trips.
- Frequent Tripping (Overcurrent):
- Check the Overcurrent Setting (P-5) to ensure it matches the maximum expected load current.
- Inspect connected appliances for faults that might draw excessive current.
- Reduce the total load connected to the protected circuit if it consistently exceeds the device's rated current.
- Display Not Working or Incorrect Readings:
- Ensure stable power supply.
- If kWh reading is stuck or incorrect, try resetting it via P-8 (if applicable and safe to do so).
If the problem persists after these steps, contact customer support or a qualified electrician.
7. User Tips
- Always ensure the device's rated current matches or exceeds the maximum expected load of your circuit.
- For critical applications, consider consulting an electrician for optimal setting configurations.
- Regularly monitor the display for voltage, current, and kWh readings to understand your power consumption and circuit health.
8. Warranty and Support
GEYA is committed to providing high-quality products. For any questions, technical assistance, or support regarding your GPS6-VAK Protector, please contact your supplier or refer to the official GEYA website for further information.
Please note that improper installation or use not in accordance with this manual may void any applicable warranty.