Jonsbo MOD-3 Mini White

Contents

Jonsbo MOD-3 Mini White RGB Middle Tower PC Gaming Case

Model: MOD-3 Mini White

Brand: Jonsbo

1. Introduction

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Jonsbo MOD-3 Mini White RGB Middle Tower PC Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the performance and longevity of your system.

2. Safety Information

Always observe the following safety precautions:

  • Disconnect all power sources before installing or removing any components.
  • Handle components with care to avoid damage from static electricity. Use an anti-static wrist strap if available.
  • Keep small parts and packaging materials away from children.
  • Ensure proper ventilation around the case to prevent overheating.
  • Do not expose the case to water or excessive humidity.
  • Avoid placing heavy objects on the case.

3. Package Contents

Upon opening the package, please verify that all components are present and undamaged. The Jonsbo MOD-3 Mini White case typically includes:

  • Jonsbo MOD-3 Mini White PC Gaming Case chassis
  • Tempered glass side panels
  • Accessory box (containing screws, standoffs, cable ties, etc.)
  • User Manual (this document)
Exploded view diagram of the Jonsbo MOD-3 Mini White PC Gaming Case, showing individual panels and frame components.
Figure 3.1: Exploded view of the MOD-3 Mini White case components.

4. Setup and Component Installation

Follow these steps to install your PC components into the Jonsbo MOD-3 Mini White case:

4.1. Preparing the Case

  1. Carefully remove the tempered glass side panels by unscrewing the thumb screws.
  2. Identify the motherboard tray and cable management areas.

4.2. Motherboard Installation

The case supports ITX and M-ATX motherboards.

  1. Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor.
  2. Place your motherboard onto the standoffs, aligning the screw holes.
  3. Secure the motherboard with screws.

4.3. CPU Cooler Installation

Ensure your CPU cooler has a length of less than 165mm to fit within the case.

  1. Install your CPU cooler onto the motherboard according to the cooler's instructions.

4.4. Graphics Card Installation

The case supports graphics cards with a maximum length of 360mm.

  1. Remove the necessary expansion slot covers (4 available).
  2. Insert your graphics card into the PCIe slot on the motherboard.
  3. Secure the graphics card with screws.

4.5. Power Supply Unit (PSU) Installation

The case supports ATX PSUs with a length of less than 165mm.

  1. Mount your ATX power supply in its designated bay.
  2. Secure the PSU with screws.

4.6. Storage Drive Installation

The case includes bays for one 3.5" HDD and one 2.5" SSD/HDD.

  1. Locate the 3.5" and 2.5" drive bays.
  2. Install your storage drives into the appropriate bays and secure them.

4.7. Fan and Water Cooling Installation

The case supports:

  • Top: 2 x 120mm or 140mm fans
  • Rear: 2 x 120mm fans
  • Water Cooling: 240mm, 280mm, or 360mm radiators
  1. Install your desired cooling fans or radiators in the specified locations.
  2. Ensure proper airflow direction for optimal cooling.

4.8. Cable Management

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics.

Jonsbo MOD-3 Mini White RGB PC Gaming Case, front-left view with internal components and RGB lighting.
Figure 4.1: Assembled case with internal components and RGB lighting.
Jonsbo MOD-3 Mini White RGB PC Gaming Case, front-right view with internal components and RGB lighting.
Figure 4.2: Another view of the assembled case, highlighting component placement.

5. Operating Your PC Case

Once all components are installed and cables are connected, you can power on your system.

5.1. Front Panel Connections

The front panel provides convenient access to:

  • Power Button: To turn your PC on/off.
  • USB 3.2 ports (x3)
  • USB 3.0 port (x1)
  • Type-C port (x1, 20PIN)
  • Audio jacks (if connected to motherboard)

Ensure these connectors are properly plugged into your motherboard's headers during assembly.

Jonsbo MOD-3 Mini White PC Gaming Case, angled view showing the front I/O ports.
Figure 5.1: Front I/O ports for connectivity.

6. Maintenance

Regular maintenance helps keep your PC running efficiently and extends the life of your components.

6.1. Cleaning the Case

  • Exterior: Use a soft, damp cloth to wipe down the exterior surfaces. Avoid abrasive cleaners.
  • Interior: Periodically, disconnect power and use compressed air to remove dust buildup from fans, radiators, and internal components.
  • Dust Filters: If your case includes dust filters, remove and clean them regularly.

6.2. Cable Management Check

Occasionally check cable routing to ensure no cables are obstructing airflow or fan blades.

7. Troubleshooting

If you encounter issues, consider the following common troubleshooting steps:

  • PC not powering on: Double-check all power connections, including the PSU to the wall, PSU to motherboard, and front panel power switch header to the motherboard.
  • Fans not spinning: Ensure fan cables are securely connected to the motherboard or fan controller. Check BIOS/UEFI settings for fan control.
  • USB ports not working: Verify that the front panel USB headers are correctly connected to the motherboard.
  • Overheating: Ensure all fans are installed correctly and spinning. Check for dust buildup and clear any obstructions to airflow.

For more complex issues, consult your component manuals or seek professional assistance.

8. Specifications

FeatureSpecification
Model NameMOD-3 Mini White
Motherboard SupportITX / M-ATX
Fan Support (Top)2 x 120mm / 140mm
Fan Support (Rear)2 x 120mm
Graphics Card Length Limit360mm
Front USB Interface3 x USB 3.2, 1 x USB 3.0
Front Type-C Interface1 x Type-C (20PIN)
PSU SupportATX (Length < 165mm)
CPU Cooler Height Limit165mm
HDD Bays1 x 3.5"
SSD Bays1 x 2.5"
Water Cooling Support240mm / 280mm / 360mm
Case Dimensions (W*D*H)251mm * 569mm * 535mm
Expansion Slots4
Gross Weight8.2KG
MaterialPlastic (as per product data, typically includes metal/glass)
TypeMid Tower
Form FactorMini-ITX (supports M-ATX)

9. User Tips

No specific user tips from reviews or Q&A were provided for this product. However, general tips for PC case users include:

  • Plan your cable routing before installing all components to ensure a clean build and optimal airflow.
  • Test components outside the case first if you are new to PC building.
  • Consider the weight of your components, especially large GPUs and CPU coolers, and ensure they are securely mounted.

10. Warranty and Support

For warranty information and technical support, please refer to the manufacturer's official website or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.