Analog to Digital Audio Converter Analog to Digital Audio Converter

Contents

Analog to Digital Audio Converter Instruction Manual

Model: Analog to Digital Audio Converter

Introduction

This Analog to Digital Audio Converter is designed to convert analog R/L stereo audio signals or 3.5mm AUX audio signals into digital coaxial or Toslink SPDIF optical digital audio signals. This allows you to connect older analog audio sources, such as TVs, CD players, or game consoles, to modern digital audio receivers, amplifiers, or soundbars that only accept digital inputs. The converter supports uncompressed 2-channel PCM/LPCM digital audio signal output with sampling rates from 48 kHz to 96 kHz. Please note that this device converts analog to digital only and cannot be used in reverse.

Package Contents

  • 1 x Analog to Digital Audio Converter
  • 1 x USB Power Cable
Analog to Digital Audio Converter and USB power cable

Image: Analog to Digital Audio Converter with included USB power cable.

Product Overview

The converter features clearly labeled input and output ports for easy connection.

  • Input Ports: R/L RCA stereo audio, 3.5mm AUX audio jack.
  • Output Ports: Coaxial digital audio, Toslink SPDIF optical digital audio.
  • Power Input: Mini USB port for 5V DC power.
Angled view of the Analog to Digital Audio Converter showing input and output ports

Image: Angled view of the converter, highlighting the RCA and 3.5mm AUX input ports, and the Coaxial and Optical output ports.

Front view of the Analog to Digital Audio Converter with 3.5mm input highlighted

Image: Front view of the audio converter, emphasizing the 3.5mm AUX input and digital outputs.

Setup Instructions

  1. Connect Audio Source: Connect your analog audio source (e.g., TV, DVD player, game console) to the converter's input ports. Use either the R/L RCA cables or a 3.5mm AUX cable.
  2. Connect Audio Receiver: Connect the digital output of the converter to your digital audio receiver (e.g., amplifier, soundbar, home theater system). Use either a Coaxial cable or a Toslink optical cable.
  3. Power Connection: Connect the provided USB power cable to the converter's Mini USB port and then to a 5V USB power source (e.g., a USB wall adapter, TV USB port, or computer USB port).
  4. Configure Source Device: Ensure your audio source device is configured to output uncompressed 2-channel PCM/LPCM audio. DTS/Dolby AC3 formats are not supported and must be turned off in your source device's audio settings.
  5. Power On: Power on all connected devices (audio source, converter, and audio receiver).

Operating Instructions

  1. Once all connections are made and devices are powered on, select the appropriate digital input on your audio receiver (e.g., 'Optical In' or 'Coaxial In').
  2. Begin playing audio from your analog source device.
  3. The converter will automatically convert the analog signal to the selected digital output format.

Troubleshooting

  • No Sound:
    • Verify all cables are securely connected.
    • Ensure the USB power cable is connected and the converter is receiving power.
    • Check that your audio source is playing audio.
    • Confirm that your audio source is set to output PCM/LPCM audio. DTS/Dolby AC3 formats are not supported.
    • Make sure your digital audio receiver is set to the correct input (Optical or Coaxial).
  • Distorted Sound or Static:
    • Check the quality of your audio cables. Try replacing them if necessary.
    • Ensure the sampling rate of your source device is within the supported range (48 kHz to 96 kHz).
    • Verify that the power supply is stable and sufficient (5V).

Specifications

Input AudioR/L RCA Stereo Audio, 3.5mm AUX Audio
Output AudioCoaxial Digital Audio, Toslink SPDIF Optical Digital Audio
Sampling Rate48 kHz, 96 kHz (Supported)
Audio Format SupportUncompressed 2-channel PCM/LPCM
Unsupported Audio FormatsDTS, Dolby AC3
Power SupplyDC 5V via Mini USB
Dimensions (Approx.)4.5 cm (W) x 4.8 cm (H)
Dimensions of the Analog to Digital Audio Converter

Image: Diagram showing the approximate dimensions of the converter.

High sampling rate feature of the converter

Image: Highlighting the support for uncompressed 2-channel PCM/LPCM digital audio signal output and sampling rates from 48 kHz to 96 kHz.

User Tips

  • Always ensure your source device's audio output settings are configured to PCM/LPCM for optimal compatibility and sound quality with this converter.
  • For best performance, use high-quality audio cables for both analog and digital connections.
  • If experiencing intermittent audio, try using a dedicated 5V USB wall adapter instead of a TV's USB port, as some TV ports may not provide consistent power.

Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.