Foval Pure Sine Wave Power Inverter (5kW-8kW Peak)

Contents

LVYUAN Pure Sine Wave Power Inverter User Manual

Model: Pure Sine Wave Power Inverter (5kW-8kW Peak)

Brand: Foval

1. Introduction

Thank you for choosing the LVYUAN Pure Sine Wave Power Inverter. This device is designed to convert DC power from your battery (12V or 24V) into stable AC power (220V-240V) suitable for a wide range of household and outdoor appliances. Its pure sine wave output ensures compatibility with sensitive electronics, providing reliable and safe power for your refrigerator, kettle, microwave, and other devices.

LVYUAN Pure Sine Wave Power Inverter with remote control and battery cables
Figure 1: LVYUAN Pure Sine Wave Power Inverter with included accessories.

This manual provides essential information for the safe and efficient operation of your inverter. Please read it thoroughly before installation and use.

2. Important Safety Information

Failure to follow these safety instructions may result in electric shock, fire, or serious injury.

  • Read all instructions before operating the inverter.
  • Keep the inverter away from water, moisture, and flammable materials.
  • Ensure adequate ventilation around the inverter to prevent overheating. Do not block cooling vents.
  • Do not open the inverter casing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Connect the inverter only to batteries with the correct voltage (12V or 24V DC) as specified for your model.
  • Always connect the positive (+) terminal of the inverter to the positive (+) terminal of the battery, and the negative (-) terminal of the inverter to the negative (-) terminal of the battery. Reverse polarity connection can cause severe damage.
  • Ensure all connections are tight and secure to prevent arcing and overheating.
  • Do not exceed the continuous power rating of the inverter.
  • Disconnect the inverter from the battery before performing any maintenance or cleaning.

3. Package Contents

Please check the package for the following items:

  • LVYUAN Pure Sine Wave Power Inverter Unit
  • Battery Connection Cables (Red for Positive, Black for Negative)
  • Wireless Remote Control (for models that include this feature)

4. Specifications

The LVYUAN Pure Sine Wave Power Inverter is available in various configurations. Please refer to your specific model for exact ratings.

FeatureDescription
TypeDC/AC Inverter
BrandFoval
OriginMainland China
CertificationCE
Peak Power Options5000W, 6000W, 7000W, 8000W
Continuous PowerApproximately half of peak power (e.g., 2500W for 5000W peak, 4000W for 8000W peak)
Input VoltageDC12V or DC24V (model dependent)
Output VoltageAC220V-240V
Wave FormPure Sine Wave
Frequency50Hz/60Hz (selectable)
AC Sockets2 x EU Sockets
USB Output5V 3.1A
Dimensions (approx.)440mm x 180mm x 140mm (for 4000W/8000W models)
Weight (approx.)6300g (for 4000W/8000W models)
Specifications for 5000W peak power inverter
Figure 2: Example specifications for a 5000W peak power inverter model.
Dimensions and weight of the inverter
Figure 3: Approximate dimensions and weight for larger inverter models.

5. Product Overview

Familiarize yourself with the different parts of your LVYUAN Power Inverter:

Front and rear panel overview of the inverter with labeled ports and features
Figure 4: Front and Rear Panel Introduction.

Front Panel Features:

  • Battery Voltage Display: Shows the current DC input voltage from the battery.
  • Frequency Switch: Allows selection between 50Hz and 60Hz output frequency.
  • Voltage Output Display: Shows the current AC output voltage.
  • USB Port: Provides 5V 3.1A power for charging USB devices.
  • 2 EU Sockets: Standard AC outlets for connecting appliances.
  • ON/OFF/REMOTE Switch: Main power switch for the inverter, also enables remote control functionality.
  • RED/GREEN Indicator: Indicates operational status (Green for normal, Red for fault).

Rear Panel Features:

  • Positive (+) Terminal: Red terminal for connecting the positive battery cable.
  • Negative (-) Terminal: Black terminal for connecting the negative battery cable.
  • Dual Cooling Fans: Intelligent fans that activate when the internal temperature reaches 48°C to prevent overheating.
Intelligent silent cooling fan system
Figure 5: Intelligent Silent Cooling Fan with auto temperature control.
Four core functions: LED smart display, Dual EU socket, 5V 3.1A USB, Silent Cooling Fan
Figure 6: Key functions of the inverter.

6. Installation

Proper installation is crucial for the safe and efficient operation of your inverter.

6.1 Choosing a Location

  • Place the inverter in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Ensure there is sufficient space around the inverter for air circulation, especially around the cooling fans.
  • Mount the inverter on a stable, non-flammable surface.

6.2 Battery Connection

WARNING: Before making any connections, ensure the inverter's ON/OFF switch is in the 'OFF' position.

  1. Identify the positive (+) and negative (-) terminals on your battery.
  2. Connect the RED battery cable to the positive (+) terminal of the inverter.
  3. Connect the other end of the RED battery cable to the positive (+) terminal of your battery.
  4. Connect the BLACK battery cable to the negative (-) terminal of the inverter.
  5. Connect the other end of the BLACK battery cable to the negative (-) terminal of your battery.
  6. Ensure all connections are tight and secure. Loose connections can cause excessive heat and damage.

6.3 Appliance Connection

Once the inverter is connected to the battery, you can plug your AC appliances into the EU sockets on the front panel. For USB devices, use the USB port.

7. Operation

7.1 Powering On/Off

  1. After connecting the inverter to the battery, press the ON/OFF switch on the front panel to the 'ON' position. The GREEN indicator light should illuminate.
  2. The Battery Voltage Display and Voltage Output Display will show the current readings.
  3. To turn off the inverter, press the ON/OFF switch to the 'OFF' position. The indicator light will turn off.

7.2 Frequency Selection

Use the 50Hz/60Hz switch on the front panel to select the appropriate output frequency for your region or appliances.

7.3 Using the Remote Control (if applicable)

If your model includes a wireless remote control, ensure the inverter's ON/OFF/REMOTE switch is in the 'REMOTE' position. You can then use the remote to power the inverter on or off from a distance.

7.4 Load Management

  • Always ensure the total continuous power draw of your appliances does not exceed the inverter's continuous power rating.
  • For inductive loads (e.g., motors, compressors, refrigerators), the starting current can be significantly higher than the running current. Ensure the inverter's peak power rating can handle these surge loads.
Inverter widely used for various appliances like refrigerator, coffee machine, microwave, kettle, power tools, pump, stereo, hairdryer
Figure 7: Examples of appliances suitable for use with the inverter.

8. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your inverter.

  • Cleaning: Periodically wipe the exterior of the inverter with a dry, soft cloth. Do not use liquid cleaners or solvents.
  • Ventilation: Ensure the cooling vents and fans are free from dust and debris. Blocked vents can lead to overheating.
  • Connections: Regularly check battery cable connections to ensure they are tight and free from corrosion.
  • Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.

9. Troubleshooting

The LVYUAN Power Inverter is equipped with multiple protection features to ensure safe operation. If you encounter an issue, check the following:

Six reliable and safe protection features: High Voltage Protection, High Temperature Protection, Overload Protection, Short Circuit Protection, Low Voltage Protection, Reverse Connection Protection
Figure 8: Inverter's built-in protection features.
ProblemPossible CauseSolution
No AC Output / Inverter not turning onLoose battery connections
Low battery voltage
Inverter switch is OFF
Blown fuse (internal)
Check and tighten battery cables.
Recharge or replace battery.
Ensure switch is ON.
Contact support; do not attempt to replace internal fuses.
RED Fault Indicator is ONOverload protection
High temperature protection
Low/High voltage protection
Short circuit protection
Reverse connection protection
Reduce connected load.
Allow inverter to cool down; ensure proper ventilation.
Check battery voltage; ensure it's within operating range.
Disconnect appliances and check for short circuits.
Immediately disconnect and correct battery polarity.
Inverter shuts down unexpectedlyOverload
Overheating
Low battery voltage
Reduce load.
Improve ventilation, allow to cool.
Recharge battery.
Fans running constantly or loudlyHigh internal temperature
Dust accumulation
This is normal if the inverter is under heavy load or in a warm environment. Ensure vents are clear. Clean dust if necessary.

10. User Tips

No specific user tips from reviews or Q&A are available at this time. However, general best practices include:

  • Always calculate the total wattage of your appliances before connecting them to avoid overloading the inverter.
  • For optimal performance and battery life, use a battery with sufficient capacity for your power needs.
  • Consider using thicker gauge cables for longer runs to minimize voltage drop, especially for higher power models.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.