1. Introduction
The Ezonetronics Wireless CarPlay Android Auto Retrofit Kit is designed to integrate advanced smartphone connectivity into your compatible Land Rover vehicle. This decoder box adds both wireless CarPlay and Android Auto functionalities, allowing you to access navigation, music, calls, and more directly on your car's existing display. The kit is engineered to maintain the original vehicle's aesthetic and control mechanisms, including the factory display, rotary controller, and steering wheel controls, providing an OEM-like user experience.

2. Key Features
- Seamless Integration: Specifically designed for Land Rover with Harman head unit and 8-inch screen.
- Wireless Connectivity: Built-in 2.4G and 5.8G WiFi for stable wireless CarPlay and Android Auto connections, along with Bluetooth 5.0 technology.
- Wired/Wireless CarPlay: Sync your phone's music, maps, and calls directly to your dashboard.
- Wired/Wireless Android Auto: Enjoy hands-free control and access to your Android device's features.
- Retains OEM Controls: Operate the system using existing steering wheel controls, touch controls (if applicable), and the vehicle's rotary controller.
- Voice Control: Activate Siri or Google Assistant with voice commands for safer driving.
- Navigation Support: Utilize popular GPS navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Enhanced Audio: Integrated Digital Signal Processor (DSP) with fully adjustable Audio EQ for superior sound quality.
- Camera Inputs: Two RCA inputs for connecting aftermarket rear and right-side PAL/NTSC cameras.
- Non-Destructive Installation: Plug-and-play design ensures no wire breaks or permanent modifications to your vehicle.
- Easy Switching: Effortlessly switch between the factory OEM car system and the CarPlay/Android Auto system using existing car controls.

3. Compatibility
This retrofit kit is compatible with specific Land Rover models equipped with an 8-inch Harman head unit. Please verify your vehicle's compatibility before installation.
| Brand | Car Model | Years | Screen Size |
|---|---|---|---|
| Land Rover | Range Rover Evoque | 2016-2018 | 8 inch |
| Land Rover | Discovery 5 | 2016-2018 | |
| Land Rover | Discovery Sport | 2016-2018 |
Important Note: To confirm compatibility, check your car's display style. This unit is compatible with 8-inch Harman style screens where the time display is typically in the middle. It is NOT compatible with Bosch style screens where the time display is on the right, or 10.25-inch Harman style screens.

4. Package Contents
The following items are included in your Ezonetronics Wireless CarPlay Android Auto Retrofit Kit:
- Ezonetronics Decoder Box (Main Unit)
- Power Cable
- LVDS OUT Cable
- LVDS IN Cable
- RCA & USB Cable

5. Setup and Installation
The Ezonetronics retrofit kit features a plug-and-play design for non-destructive installation. It is recommended that installation be performed by a qualified professional to ensure proper functionality and to avoid damage to your vehicle.
5.1 General Installation Overview
- Access your vehicle's head unit area.
- Disconnect the necessary factory cables from the head unit.
- Connect the provided power cable, LVDS IN, LVDS OUT, and RCA & USB cables to the Ezonetronics decoder box and integrate them with your vehicle's wiring harness as per the specific wiring diagram for your Land Rover model.
- Ensure all connections are secure.
- Carefully reassemble your vehicle's dashboard components.
Note: Detailed wiring diagrams and specific installation steps may vary by vehicle model and year. Consult a professional installer or the full product manual (if available) for precise instructions.
5.2 Optional Camera Installation
The unit supports aftermarket rear and right-side PAL/NTSC cameras via its two RCA inputs. Connect your aftermarket camera's video output to the corresponding RCA input on the decoder box. Ensure proper power and ground connections for the camera.

6. Operating Instructions
6.1 Switching Between Systems
To switch between your vehicle's original OEM system and the CarPlay/Android Auto interface, long-press the "Home" button on your car's central control panel or rotary controller. This allows seamless transition without losing factory functionality.

6.2 Wireless CarPlay / Android Auto Connection
- Ensure your smartphone's Bluetooth and Wi-Fi are enabled.
- On your car's display, navigate to the CarPlay/Android Auto interface.
- For CarPlay: Select "CarPlay" on the screen. Your iPhone should detect the system. Follow the prompts on your iPhone to connect.
- For Android Auto: Select "Android Auto" on the screen. Your Android phone should detect the system. Follow the prompts on your phone to connect.
- Once connected, your phone's interface will be mirrored on the car's display, allowing access to compatible apps.


6.3 Bluetooth Audio Output
The system utilizes your car's factory Bluetooth for audio output, minimizing interference and providing faster sound response. Follow these steps for audio output:
- Pair Car Bluetooth: Ensure your phone is paired with your car's original Bluetooth system.
- Connect CarPlay/Android Auto: Establish a wireless CarPlay or Android Auto connection as described above.
- Select Sound Output: On your phone or car's display, select "Car BT" or "Land Rover" as the audio output source.

6.4 Voice Control
Utilize intelligent voice control for hands-free operation. Simply say "Hey Siri" for Apple CarPlay or use Google Assistant for Android Auto to control navigation, music, calls, and more.

6.5 Navigation
Access your preferred navigation apps such as Google Maps, Waze, or Apple Maps directly through CarPlay or Android Auto. Enjoy real-time traffic updates and turn-by-turn directions on your car's display.

7. Maintenance
The Ezonetronics Wireless CarPlay Android Auto Retrofit Kit is designed for durability and requires minimal maintenance. Follow these general guidelines:
- Cleaning: Keep the decoder box and cables free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners directly on the unit.
- Environment: Ensure the unit is installed in a location that avoids extreme temperatures, direct sunlight, and excessive moisture.
- Cable Integrity: Periodically check cables for any signs of wear or damage. Ensure connections remain secure.
8. Troubleshooting
If you encounter issues with your Ezonetronics retrofit kit, try the following troubleshooting steps:
8.1 No Display / Black Screen
- Check Power: Ensure the decoder box is receiving power. Verify all power cable connections.
- Cable Connections: Recheck LVDS IN/OUT cables and other video connections. Ensure they are securely seated.
- System Switch: Confirm you have correctly switched to the CarPlay/Android Auto interface from the OEM system (long-press Home button).
8.2 Wireless Connection Issues (CarPlay/Android Auto)
- Bluetooth & Wi-Fi: Ensure both Bluetooth and Wi-Fi are enabled on your smartphone.
- Forget Device: On your phone, forget the car's Bluetooth/Wi-Fi connection and attempt to pair again.
- Restart: Restart your smartphone and the car's infotainment system (if possible) or turn the car off and on.
- Interference: Move away from strong Wi-Fi interference sources if possible.
8.3 No Audio / Poor Audio Quality
- Bluetooth Output: Verify that "Car BT" or "Land Rover" is selected as the audio output source on your phone and the car's system.
- Volume Levels: Check volume levels on both your phone and the car's infotainment system.
- DSP Settings: If audio quality is poor, check the DSP settings within the CarPlay/Android Auto interface and adjust the Audio EQ.
8.4 Controls Not Responding
- Reboot: Try restarting the car's infotainment system.
- Compatibility: Ensure your vehicle's specific controls (steering wheel, touch) are supported by the unit.
9. Specifications
| Feature | Detail |
|---|---|
| Model | RM-LH2523F-LR |
| Compatibility | Land Rover Range Rover Evoque, Discovery 5, Discovery Sport (2016-2018) with 8-inch Harman head unit |
| Wireless Connectivity | 2.4G & 5.8G WiFi, Bluetooth 5.0 |
| Supported Systems | Wireless/Wired Apple CarPlay, Wireless/Wired Android Auto |
| Audio Processing | Built-in DSP with adjustable Audio EQ |
| Camera Inputs | 2 x RCA (for aftermarket rear and right PAL/NTSC cameras) |
| Dimensions (L x W x H) | 139mm x 92mm x 20mm |
| Weight | 1.3 kg (approximate, including packaging) |
10. User Tips
- For optimal performance, ensure your smartphone's operating system is up to date.
- If experiencing intermittent connectivity, try resetting your phone's network settings or the car's infotainment system.
- Utilize voice commands frequently to minimize distractions while driving.
11. Warranty and Support
For warranty information, technical support, or assistance with installation, please contact Ezonetronics customer service or your authorized dealer. Keep your purchase receipt and product model number (RM-LH2523F-LR) handy when contacting support.