VSYSTO C4.3K Bicycle Dash Cam User Manual

Introduction

The VSYSTO C4.3K Bicycle Dash Cam is a multifunctional device designed to enhance safety and record your journeys on various two-wheeled vehicles. It integrates a 4.3-inch high-definition display, infrared night vision, GPS module, and a convenient wire controller. This manual provides detailed instructions for setting up, operating, and maintaining your dash cam.

The VSYSTO C4.3K features a 4.3-inch display screen, infrared night vision camera, 3200mAh battery, GPS module, and a wire controller for easy operation.

Package Contents

Please check the package for the following items:

The package includes the 4.3-inch display unit, camera, wire controller, GPS module, zip ties for mounting, and a USB charging cable.

• 4.3-inch Display Unit
• Camera (with infrared night vision lens)
• Wire Controller
• GPS Module
• USB Charging Cable
• Mounting Accessories (e.g., zip ties)

Setup

1. Mounting the Dash Cam

The VSYSTO C4.3K is designed for easy installation on various two-wheeled vehicles, including mountain bikes, road bikes, electric bikes, city bikes, bicycle trailers, and touring bicycles.

This dash cam can be professionally used on mountain bikes, road bikes, electric bikes, city bikes, bicycle trailers, and touring bicycles.

1. Display Unit: Mount the 4.3-inch display unit securely on your motorcycle handle or bicycle head using the provided mounting accessories. Ensure it is positioned for clear visibility without obstructing your view of the road.
2. Camera: Attach the camera to a suitable location, such as the rear of your bicycle, ensuring it has a clear view of the road behind you.
3. GPS Module: Connect the external GPS module and place it in a location with an unobstructed view of the sky for optimal signal reception.
4. Wire Controller: Mount the wire controller within easy reach on your handlebar for convenient operation.

The diagram shows the display unit mounted on the handlebar, the camera mounted at the rear, and the GPS module positioned for signal reception.

2. Inserting the Memory Card

The device supports MicroSD/TF memory cards. Ensure you use a Class 10 or higher speed memory card for reliable recording performance.

1. Locate the memory card slot on the display unit.
2. Gently insert the MicroSD/TF card until it clicks into place.
3. To remove, push the card in again until it springs out.

3. Initial Charging

Before first use, fully charge the dash cam using the provided USB charging cable. Connect the USB cable to the dash cam's USB charging port and a suitable USB power source (e.g., a computer USB port or a USB wall adapter).

The device supports recording while charging via its USB port, offering up to 270 minutes of continuous recording on a full charge.

Operating Instructions

1. Power On/Off

Use the wire controller to power on or shut down the dash cam. The 4.3-inch display will activate upon power-on.

2. Recording

The dash cam supports continuous loop recording. Once powered on and a memory card is inserted, it will automatically begin recording. The system will automatically overwrite the earliest saved video files when the memory card is full, ensuring you always have the latest recordings.

The GPS module provides precise positioning and data, while loop recording ensures continuous video capture by overwriting older files.

• Start/Stop Recording: Use the dedicated button on the wire controller to manually start or stop recording.
• Seamless Recording: The device is designed for seamless recording, ensuring no gaps between video files.

3. Display and Settings

The 4.3-inch display screen provides real-time image preview, video playback, and allows for adjustment of settings.

The large display allows for high-definition picture quality and convenient playback of recorded videos at any time.

4. Wire Controller Functions

The wire controller simplifies operations, allowing you to manage the dash cam without frequently looking at the screen.

Shutdown and other functional operations can be performed conveniently through the buttons on the wire controller.

• Power On/Off
• Start/Stop Recording
• Accessing GPS Data (Calories, atmospheric pressure, altitude, latitude/longitude, speed, cycling time, total mileage)
• Other functions as per device settings.

5. Infrared Night Vision

The camera is equipped with a 940nm invisible infrared light night vision lens, enabling clear recording of road conditions even in low-light or nighttime environments.

The 940nm invisible infrared light night vision lens ensures clear recording of road conditions when driving at night.

6. GPS Data Display

The external GPS module provides precise positioning and records various riding data. This data can be viewed on the display screen via the wire controller.

The screen displays information such as speed, distance, coordinates (N, E), altitude, and time, providing comprehensive riding data.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the display screen and camera lens. Avoid using abrasive cleaners or solvents.
• Waterproof Care: While the host unit has an IP65 waterproof rating and the camera an IP67 rating, it is important to note:
  • Do not soak the device in water for a long time.
  • Do not use a high-pressure water gun to wash the device.

  

  The device is designed to be waterproof and dustproof, but avoid prolonged submersion or high-pressure washing.

• Memory Card: Periodically format your memory card (after backing up important files) to maintain optimal performance and prevent data corruption.
• Storage: When not in use for extended periods, store the dash cam in a cool, dry place away from direct sunlight.

Troubleshooting

• Device not powering on:
  • Ensure the battery is charged. Connect to a power source and try again.
  • Check all cable connections, especially to the power source and wire controller.
• Recording issues (e.g., no recording, corrupted files):
  • Verify that a compatible MicroSD/TF card (Class 10 or higher) is properly inserted.
  • Format the memory card. If issues persist, try a different memory card.
  • Ensure the memory card is not full (though loop recording should prevent this, a faulty card might not overwrite).
• GPS signal not acquired:
  • Ensure the GPS module is connected and placed in an open area with a clear view of the sky.
  • Avoid areas with tall buildings or dense foliage that might block the signal.
• Display not working or flickering:
  • Restart the device.
  • Check for any physical damage to the screen or connections.

Specifications

User Tips

• Memory Card Performance: Always use a high-quality Class 10 or U3 rated MicroSD/TF card to ensure smooth recording and prevent dropped frames or corrupted files, especially when recording continuously.
• GPS Signal: For accurate GPS data, ensure the GPS module has a clear line of sight to the sky. Avoid mounting it under metal objects or in enclosed spaces.
• Night Vision Clarity: Keep the infrared night vision lens clean and free from dirt or smudges to maximize clarity during nighttime recordings.
• Battery Life: While the device supports recording while charging, for longer rides, consider carrying a portable power bank to extend recording time.
• Water Exposure: Although waterproof, it's good practice to wipe down the device after riding in heavy rain to prevent water spots or mineral buildup.

Warranty and Support

VSYSTO is committed to providing professional-grade DVRs and dash cams. For any support inquiries, technical assistance, or warranty claims, please refer to the official VSYSTO website or contact their customer service directly.

VSYSTO Official Store has been operating since August 8, 2017, and is based in Guangdong, China, with a focus on quality, performance, and reliability.