4DRC V34

Contents

4DRC V34 RC Drone Instruction Manual

Model: V34

1. Introduction

Thank you for choosing the 4DRC V34 RC Drone. This advanced drone features a 4-axis design, GPS positioning, brushless motors, and a folding structure for portability. It comes equipped with an integrated remote control featuring a 4.5-inch HD screen, smart control capabilities, and an 8K dual camera system for aerial photography and video recording. Key functionalities include intelligent obstacle avoidance and a unique one-button spray feature. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your V34 drone.

4DRC V34 RC Drone with remote control, showing GPS 8K ULTRAHD features and battery/memory card icons.
Figure 1: 4DRC V34 RC Drone and Remote Control

2. Safety Information

⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

  • Always operate the drone in open areas, away from people, animals, and obstacles.
  • Ensure the drone is fully charged and calibrated before each flight.
  • Do not fly in strong winds or adverse weather conditions.
  • Maintain a safe distance from the drone during operation, especially during takeoff and landing.
  • Regularly inspect the drone for any damage to propellers, motors, or body.
  • Keep hands and face clear of rotating propellers.

3. Package Contents

Verify that all items listed below are included in your package.

  • V34 RC Drone
  • Remote Control with 4.5-inch HD Screen
  • Propellers (Blades)
  • Charging Cable
  • Screwdriver
  • Storage Bag
  • Smart Battery (Quantity may vary by package, e.g., 1, 2, or 3 batteries)
  • Memory Card (e.g., 32GB or 64GB, depending on version) + Card Reader (for WiFi version)
  • User Manual (this document)
Image showing the V34 drone, remote control, propellers, charging cable, screwdriver, and storage bag.
Figure 2: Standard Package Contents

4. Product Overview

4.1 Drone Components

Close-up of the V34 drone's 8K dual camera system with adjustable lens and wide-angle capabilities.
Figure 3: Drone 8K Dual Camera System
  • 8K Dual Cameras: Electrically adjustable with 90° remote control angle and 110° wide angle for versatile shooting.
  • Obstacle Avoidance Sensor: Intelligent perception system to detect and avoid obstacles in all directions.
  • Brushless Motors: Provide stable and efficient flight performance with low noise.
  • Folding Arms: For compact storage and portability.
  • LED Lights: Indicate drone status and aid in orientation.
  • Spray Device: Located at the tail, activated by one-click for special effects.

4.2 Remote Control Layout

Diagram of the remote control showing buttons for antenna, unlock, throttle, power switch, return, flip up/take a photo, scroll down/video recording, obstacle avoidance/spray, direction lever, return/headless, turn off screen, camera flip/edit, confirm, and the 4.5-inch screen.
Figure 4: Remote Control Guide
  • Antenna: For signal transmission.
  • Unlock (long press): Initiates drone unlocking sequence.
  • Throttle: Controls altitude.
  • Power Switch: Turns the remote control on/off.
  • Return: Activates GPS Return to Home function.
  • Flip up/Take a photo: Captures still images.
  • Scroll down/Video recording: Starts/stops video recording.
  • Obstacle Avoidance/Spray: Toggles obstacle avoidance or activates the spray function.
  • Direction Lever: Controls drone movement (forward, backward, left, right).
  • Return/Headless: Toggles Headless Mode or initiates Return to Home.
  • Turn off screen (long press): Turns off the remote's display.
  • Camera Flip/Edit: Adjusts camera angle or accesses editing features.
  • Confirm: Confirms selections on the screen.
  • 4.5-inch Screen: Displays real-time flight data and camera feed.

4.3 Dimensions

Diagram showing the folded and expanded dimensions of the V34 drone. Folded: 15cm length, 7cm width, 6cm height. Expanded: 32cm length, 31cm width, 6cm height.
Figure 5: Drone Dimensions (Folded and Expanded)
StateLengthWidthHeight
Folded15 cm7 cm6 cm
Expanded32 cm31 cm6 cm

5. Specifications

FeatureDetail
ModelV34
Brand NameELIGIPORT (4DRC)
CategoryCamera Drone
Motor TypeBrushless Motor
Obstacle Avoidance TypesVisual Avoidance (Intelligent perception)
Max Wind Speed Resistance< 10 KM/H
Max Takeoff Weight<1kg
Equipped with Aerosol Spraying SystemYes
Video Maximum Resolution720P (1280x720) (Note: Marketing materials may refer to 8K capabilities, but the specified resolution is 720P.)
Aircraft Operating Frequency2.4 GHz (5G WiFi for image transmission)
Drone Weight190g
Camera Mount TypeOther (Integrated dual cameras)
GPSYes
Display ControlYes (Integrated 4.5-inch screen on remote)
ConnectivityWiFi
Flight Time20-25 minutes
Remote Distance100m (Control), up to 4km (Image Transmission, marketing claim)
Camera Features720p HD Video Recording, Aerial Photography, Gesture Photography, Multi Zoom, Vertical Shooting
Sensor Size1/1.28 Inches
Battery (Drone)3.7V Module Lithium Battery
Battery (Remote)Built-in Rechargeable Lithium Battery

6. Setup

6.1 Unfolding the Drone

  1. Carefully unfold the drone arms until they are fully extended and locked into position. Refer to Figure 5 for visual guidance on expanded dimensions.
  2. Ensure all propellers are securely attached and free from obstruction.

6.2 Battery Installation and Charging

  1. Drone Battery: Insert the 3.7V module lithium battery into the designated compartment on the drone. Ensure it clicks into place.
  2. Remote Control Battery: The remote control has a built-in rechargeable lithium battery.
  3. Charging:
    • Connect the charging cable to the drone battery (if removable) or directly to the drone/remote control.
    • Plug the other end of the charging cable into a suitable USB power adapter (not included).
    • Charging indicators will show the charging status. Ensure both the drone and remote control are fully charged before first use and subsequent flights.

6.3 Power On and Pairing

  1. Power On Remote: Press and hold the Power Switch button on the remote control (refer to Figure 4) until it powers on and the screen illuminates.
  2. Power On Drone: Place the drone on a flat, level surface. Press and hold the power button on the drone until its indicator lights turn on.
  3. Pairing: The drone and remote control should automatically pair. The indicator lights on the drone will change from flashing to solid once paired. If pairing fails, power cycle both devices and try again.
  4. Calibration: Follow the on-screen instructions on the remote control for GPS and gyroscope calibration before your first flight and if you change flight locations significantly.

7. Operation

7.1 Basic Flight Controls

Familiarize yourself with the remote control layout (Figure 4) before attempting flight.

  • Takeoff/Landing: After pairing and calibration, long press the "Unlock" button to arm the motors. Use the "Throttle" lever to ascend/descend. For one-key takeoff/landing, refer to the remote control's on-screen options.
  • Direction: Use the "Direction Lever" to move the drone forward, backward, left, or right.
  • Hover: The drone features Optical Flow Hover for real-time stabilizing flight, making it easier to maintain altitude.
  • Speed Adjustment: Use the speed gear mode switch on the remote to adjust flight speed for different environments and skill levels.

7.2 Advanced Flight Features

  • GPS Positioning: Provides stable flight and accurate positioning. Ensure a strong GPS signal before utilizing GPS-dependent features.
  • Intelligent Obstacle Avoidance: The drone is equipped with a visual avoidance system that detects obstacles in all directions to prevent collisions. This feature can be toggled using the "Obstacle Avoidance/Spray" button.
    V34 drone demonstrating intelligent perception obstacle avoidance, with red rings indicating sensor detection.
    Figure 6: Intelligent Obstacle Avoidance in Action
  • One-Button Spray: Activate the unique spray function via the "Obstacle Avoidance/Spray" button. The special spray device at the tail atomizes water into a fine mist.
    V34 drone emitting a mist from its tail, illustrating the one-click spray feature.
    Figure 7: One-Click Spray Function
  • Intelligent Follow (Follow Camera Assistant): The drone can automatically follow the operator using GPS positioning, acting as a personal follower for dynamic shots.
  • Custom Waypoint Flight: Draw a desired trajectory on the GPS map via the remote control, and the drone will automatically fly along the specified path.
    Map interface showing a custom waypoint trajectory drawn over a mountainous landscape, indicating the drone's automated flight path.
    Figure 8: Custom Waypoint Flight
  • Surround Flight Mode: Perform 360° surround flight shooting around a designated point of interest.
    Aerial view of a drone performing a 360-degree surround flight around a person on a beach, with a circular flight path indicated.
    Figure 9: Surround Flight Mode
  • GPS High-Precision Return: Press the "Return" button on the remote control to initiate an automatic return to the takeoff point. This feature also activates in cases of low battery, over-distance, or loss of control.
    V34 drone returning to its home point via GPS, indicated by green lines on a mountainous landscape.
    Figure 10: GPS High-Precision Return
  • Headless Mode: Allows the drone to fly based on the orientation of the remote control, regardless of the drone's front direction.

7.3 Camera Operation

  • Photography: Press the "Flip up/Take a photo" button to capture still images.
  • Video Recording: Press the "Scroll down/Video recording" button to start and stop video recording. The remote's screen will display a [REC] indicator when recording.
    Remote control screen displaying a live camera feed from the drone, with a [REC] indicator for video recording.
    Figure 11: High-Definition Photography/Video Recording
  • Camera Adjustment: Use the "Camera Flip/Edit" button or on-screen controls to adjust the camera angle (90° remote adjustment).
  • Vertical Shooting: The drone supports high-quality 9:16 vertical videos, ideal for short video platforms.
  • Gesture Photography/Video Recording: Perform specific gestures to trigger photo or video capture.
  • Multi Zoom Shooting: Utilize the multi-zoom feature (1x, 2x, 5x) to capture distant scenery.
Video 1: Demonstration of 4DRC V34 Drone Features, including flight, camera, and obstacle avoidance.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the drone and remote control. Avoid using harsh chemicals or solvents.
  • Propeller Inspection: Regularly check propellers for cracks, bends, or damage. Replace damaged propellers immediately using the provided screwdriver and spare parts. Ensure the warning "Always keep your body away from the rotating rotors" is heeded.
  • Battery Care:
    • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
    • Do not overcharge or over-discharge batteries.
    • If storing for extended periods, charge batteries to approximately 50-60% capacity.
  • Storage: When not in use, fold the drone arms and store it in the provided storage bag to protect it from dust and damage.

9. Troubleshooting

ProblemPossible CauseSolution
Drone does not respond to remote.Not paired, low battery on remote/drone, out of range.Ensure both devices are powered on and fully charged. Re-pair the drone and remote. Fly within the specified remote distance.
Unstable flight/Drifting.Improper calibration, strong winds, damaged propellers.Perform gyroscope and GPS calibration. Avoid flying in windy conditions. Check and replace damaged propellers.
GPS features not working.Weak GPS signal, drone not calibrated.Fly in an open area with clear sky. Ensure GPS calibration is complete and the drone has acquired enough satellites.
Short flight time.Battery not fully charged, old battery, aggressive flying.Fully charge the battery before each flight. Consider replacing old batteries. Fly more conservatively.
Obstacle avoidance not working.Feature disabled, sensor obstruction, specific lighting conditions.Ensure obstacle avoidance is enabled. Clean sensors. Note that performance may vary in certain lighting or complex environments.

10. User Tips

  • Optimize Battery Life: To maximize your flight time, avoid continuous high-speed maneuvers and aggressive acceleration. Plan your flight path efficiently. Always ensure your drone battery is fully charged before each flight.
  • Practice in Open Spaces: For beginners, start flying in large, open areas free from obstacles to get accustomed to the controls.
  • Understand Local Regulations: Always be aware of and comply with local drone flying laws and regulations in your country or area to ensure legal and safe operation.
  • Regular Firmware Updates: Check the manufacturer's website for any available firmware updates for your drone and remote control to ensure optimal performance and access to new features.

11. Compliance and Disclaimer

This product is intended for recreational use only. Users are responsible for understanding and complying with all applicable local laws and regulations regarding drone operation. The manufacturer is not liable for any damage, injury, or legal consequences resulting from improper use or failure to comply with regulations.

12. Support

For technical support, warranty information, or further assistance, please contact the retailer or manufacturer directly. Refer to your purchase documentation for contact details.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.