SAMOLLA 9000-13000

Contents

SAMOLLA Fishing Spinning Reel User Manual

Models: 9000, 11000, 13000

1. Introduction

Thank you for choosing the SAMOLLA Fishing Spinning Reel. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new fishing reel. Designed for both freshwater and saltwater environments, this reel features a robust all-metal body, a powerful 25KG max drag system, and an 8+1 stainless steel ball bearing system for smooth performance. Please read this manual thoroughly before use to ensure optimal performance and longevity of your reel.

SAMOLLA Fishing Spinning Reel

Figure 1: SAMOLLA Fishing Spinning Reel (Worm Shaft model)

2. Specifications

The SAMOLLA Fishing Spinning Reel is engineered for high performance and durability. Key specifications are detailed below:

Product Specification Table and Reel Features

Figure 2: Product Specification Table and Reel Features

Table 1: SAMOLLA Fishing Spinning Reel Specifications
FeatureDescription
Brand NameSAMOLLA
Model Numbers9000, 11000, 13000
Gear Ratio4.6:1
Ball Bearings8+1 Stainless Steel
Max Drag25KG
Hand DirectionAmbidextrous (Right/Left Inter-Changeable Handle)
MaterialAluminum (All Metal Body)
Baits TypeFake Bait
Fishing Reels TypePre-Loading Spinning Wheel, Surf Fishing
Fishing MethodThrow, Spinning, Surf Fishing, Iron Plate
PositionOcean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River, Reservoir Pond, Stream
Special FeaturesCNC Precision Machining Spool, Unidirectional Bearings, Improved Sound Clicker, Infinite Anti-Reverse Check Switch, Screw Type CNC Handle, Zero Reverse One-Way Clutch Bearing, Worm Shaft

2.1. Weight and Line Capacity

Table 2: Weight and Line Capacity by Model
ModelWeightLine Capacity (mm/m)
9000616g0.20/390, 0.24/270, 0.26/230
11000620g0.34/370, 0.40/270, 0.46/190
13000632g0.40/400, 0.48/280, 0.57/200

2.2. Dimensions

Reel Dimensions for BP9000, BP11000, BP13000

Figure 3: Reel Body Dimensions

  • Reel Height: 14.3 cm (5.63 in)
  • Reel Body Width: 7.2 cm (2.83 in)
Spool Dimensions for BP9000, BP11000, BP13000

Figure 4: Spool Dimensions

  • Spool Diameter: 7.40 cm (2.75 in)
  • Spool Height: 3.5 cm (1.37 in)
  • Spool Inner Width:
    • BP9000: 6.8 cm (2.67 in)
    • BP11000: 5.7 cm (2.24 in)
    • BP13000: 4.6 cm (1.81 in)

3. Setup

3.1. Handle Installation

The SAMOLLA Spinning Reel features an ambidextrous design, allowing the handle to be installed on either the right or left side for user comfort.

  1. Identify the screw-in handle mechanism.
  2. Insert the handle shaft into the desired side of the reel body.
  3. Rotate the handle clockwise to securely screw it into the rocker arm until it is firm. Do not overtighten.
Screw-in Handle Mechanism

Figure 5: Screw-in Handle for Easy Installation

3.2. Spool and Line Winding

  1. Ensure the spool is properly seated on the main shaft.
  2. Secure the spool by tightening the spool knob.
  3. Attach your fishing line to the spool using an appropriate knot.
  4. Begin winding the line onto the spool, ensuring even tension to prevent tangles and maximize casting performance. Do not overfill the spool.

4. Operating Your Reel

4.1. Drag System Adjustment

The reel is equipped with a powerful 25KG max drag system. The drag knob is located on the top of the spool. Turn the drag knob clockwise to increase drag tension and counter-clockwise to decrease it. Adjust the drag according to the fishing line strength and the size of the fish you are targeting. Always test the drag before fishing.

4.2. Casting with Worm Shaft

The worm shaft mechanism ensures tighter wire closure, which effectively increases throwing distance and improves line lay. To cast, open the bail, hold the line with your finger, and cast your lure. Close the bail manually or by turning the handle to engage the retrieve.

Worm Shaft Mechanism Diagram

Figure 6: Worm Shaft for Enhanced Casting

4.3. Anti-Entanglement Device

The reel features an anti-entanglement device designed to prevent fishing line from tangling around the rotor or spool during casting and retrieval. This helps ensure smooth operation and reduces frustrating line issues.

Anti-Entanglement Device

Figure 7: Anti-Entanglement Device Location

5. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your SAMOLLA Fishing Spinning Reel. This section outlines daily and deep maintenance procedures.

5.1. Preparation

  • Tools: Soft cloth, cotton swabs, bearing oil, gear grease, cleaning agent, screwdriver, tweezers.
  • Environment: Clean, well-lit, dust-free workspace.
  • Prep: Remove fishing line, spool, and clean surface dirt.

5.2. Daily Basic Maintenance (After Each Use)

  1. Rinse the reel with clean fresh water to remove salt, sand, and dirt.
  2. Wipe the entire reel dry with a soft cloth.
  3. Remove the spool and air-dry the rotor and internal parts.
  4. Check the line roller, handle, and bail for smooth operation.
  5. Apply 1-2 drops of bearing oil to the line roller if it feels stiff or noisy.

5.3. Full Deep Maintenance (Every 1-3 Months)

Step 1: Disassembly

  1. Unscrew the spool knob and remove the spool.
  2. Take off the handle, lock nut, and star drag / drag knob.
  3. Remove the rotor and side cover screws.
  4. Carefully take out the gear set, bearings, and washers.
Exploded View of Reel Components

Figure 8: Exploded View of Reel Components for Deep Maintenance

Step 2: Cleaning

  1. Wipe old grease, dirt, and metal powder with a cloth and cotton swabs.
  2. Clean bearings with a cleaning agent and let them dry completely.
  3. Do not use strong solvents (e.g., gasoline, thinner) as they can damage components.

Step 3: Lubrication

  1. Gears & Main Shaft: Apply proper gear grease.
  2. Bearings & Line Roller: Apply 1-2 drops of bearing oil.
  3. Drag Washers: Lightly coat with special drag grease if needed.
  4. Do NOT overlubricate; excess oil attracts dust and debris.

Step 4: Reassembly & Adjustment

  1. Reinstall all parts in reverse order of disassembly.
  2. Tighten screws moderately (do not over-tighten).
  3. Adjust the drag system to ensure even tension.
  4. Test rotation, handle, and bail action to confirm smooth operation.

5.4. Important Warnings

  • After saltwater use, rinse immediately with fresh water to prevent rust and corrosion.
  • Do not disassemble parts you are not familiar with. Consult a professional if unsure.
  • Keep bearings away from dust and water during cleaning and storage.
  • Replace worn drag washers, bearings, or gears in a timely manner to maintain performance.
  • Store the reel in a cool, dry place away from direct sunlight and extreme temperatures.

5.5. Maintenance Frequency

  • Occasional Freshwater Use: Every 2-3 months.
  • Frequent Fishing: Every 1 month.
  • Saltwater / Beach Fishing: Clean after every use, full deep maintenance monthly.

For a detailed PDF version of the maintenance manual, please refer to the official document: SAMOLLA Spinning Reel Maintenance Manual (PDF)

6. Troubleshooting

This section provides solutions to common issues you might encounter with your spinning reel.

Table 3: Common Troubleshooting Guide
ProblemPossible CauseSolution
Line roller is stiff or noisyLack of lubrication, dirt/debrisApply 1-2 drops of bearing oil to the line roller. Clean any visible dirt.
Drag system feels uneven or inconsistentImproper adjustment, worn drag washers, dirt in drag systemAdjust the drag knob. If issue persists, disassemble and clean drag washers, apply fresh drag grease, or replace worn washers.
Reel feels rough or grinds during retrieveDirt/sand in gears, worn bearings, lack of lubricationPerform a full deep maintenance (Section 5.3). Clean and lubricate gears and bearings. Replace any damaged bearings.
Line tangles frequentlyOverfilled spool, improper line winding, worn anti-entanglement deviceEnsure spool is not overfilled. Re-spool line with even tension. Check anti-entanglement device for damage.

7. User Tips

  • Post-Fishing Rinse: Always rinse your reel with fresh water after each use, especially after saltwater fishing, to prevent corrosion and extend its lifespan.
  • Lubrication is Key: Pay attention to the line roller and main gears. A few drops of oil or a small amount of grease can make a big difference in smoothness and prevent wear.
  • Handle with Care: While the reel boasts an all-metal body, some internal components may still be susceptible to damage from impacts. Handle your reel carefully to avoid accidental damage.
  • Check for Damage: Regularly inspect your reel for any signs of damage, such as bent parts or scratches, which could affect performance.

8. Frequently Asked Questions (FAQ)

Q: Is this reel suitable for saltwater fishing?
A: Yes, the SAMOLLA Spinning Reel is designed for both freshwater and saltwater use. However, it is crucial to rinse it thoroughly with fresh water after every saltwater fishing trip to prevent corrosion.
Q: Can I change the handle from right to left?
A: Yes, the reel features an ambidextrous design with an inter-changeable screw-in handle, allowing you to easily switch it to your preferred side.
Q: What type of line should I use?
A: The appropriate line type and diameter depend on your fishing method and target species. Refer to the 'Line Capacity' in the specifications section for recommended line diameters for each model.
Q: How often should I perform deep maintenance?
A: For occasional freshwater use, every 2-3 months. For frequent fishing, every month. For saltwater or beach fishing, a full deep maintenance is recommended monthly, in addition to daily rinsing.

9. Warranty and Support

For any issues not covered in this manual or for warranty inquiries, please contact SAMOLLA customer support. Keep your purchase receipt as proof of purchase. For detailed maintenance procedures, please refer to the official PDF manual referenced in Section 5.5.

© 2023 SAMOLLA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.