iScooter A14 Electric Dirt Bike for Kids Instruction Manual

1. Introduction

The iScooter A14 Electric Dirt Bike is designed to provide an exhilarating and safe off-road experience for children. Equipped with a powerful 500W motor and a 5.2Ah battery, it offers swift acceleration and excellent traction for various terrains. This manual provides essential information for the safe assembly, operation, and maintenance of your electric dirt bike.

Kids Electric Dirt Bike

【500W High-Power Motor】

Effortlessly traverse grassy slopes and sandy terrain with swift acceleration and exceptional traction, making outdoor adventures truly exhilarating. Power equals safety: instant acceleration for agile obstacle avoidance, maintaining ample torque even under load.

【Built-in Bluetooth Speaker】

Press a button to play music or audiobooks, transforming your ride into a mobile party that sparks imagination and makes you the coolest attraction in the neighbourhood. The high-power motor operates smoothly with minimal noise, delivering both power and music for outdoor enjoyment.

【Premium Quality Assurance, Safety First】

Features a specially reinforced frame, high-performance battery, and safety circuitry. Materials meet national certification standards, ensuring secure and stable operation throughout.

Choose the iScooter children's electric off-road vehicle to cultivate courage, an adventurous spirit, and mastery! Own yours now and embark on your exclusive riding adventure!

Figure 1: iScooter A14 Electric Dirt Bike overview with key specifications.

2. Safety Information

Children's Electric Motorcycle Safety Guidelines

To Parents: Please read thoroughly and ensure your child adheres to these instructions

To safeguard your child's safety, please carefully review the following precautions before using this product:

1.Wear protective gear: Before each ride, ensure your child correctly wears safety-standard compliant helmets, knee pads, elbow pads and gloves. Riding without protective gear is strictly prohibited.

2.Select Safe Locations: Ride only in open, flat, enclosed areas (e.g., private gardens, park clearings). Absolutely avoid use on roads, motor vehicle lanes, staircases, slopes, near swimming pools, or in busy public areas to prevent serious collision accidents.

3.Adult Supervision: Children must be under constant adult supervision and guidance throughout riding sessions. Never allow children to play unsupervised. Guardians must ensure children remain within full sight at all times.

4.Speed Control: Beginners should start in low-speed mode. Only progress to medium-speed mode once the child demonstrates competent control. High-speed mode should only be used in absolutely safe environments where the child can manage it.

5.Prohibited Dangerous Behaviour: Overloading is strictly forbidden (only one rider permitted). Performing stunts or dangerous manoeuvres is strictly forbidden. Riding on slippery surfaces (wet/snowy conditions, muddy terrain) is strictly forbidden.

6.Charging and Battery Safety:

Use only the original charger, and ensure charging is supervised by an adult.

Keep away from flammable items during charging; never cover the charger or battery.

Do not charge indoors, in high temperatures, or in direct sunlight.

If the battery is unused for extended periods, perform a charge-discharge maintenance cycle every three months.

7.Regular Inspections: Before each use, parents must inspect the vehicle's critical components, including:

Tyres: Check for adequate pressure and any damage.

Brakes: Ensure braking function is responsive and effective.

Screws and Fasteners: Verify no loose components.

Battery Level: Confirm sufficient charge; avoid riding when power is depleted.

Cycling Safety Tips for Young Riders

Protective gear is my best friend: Never cycle without a helmet and protective gear!

Listen to Mum and Dad: Only cycle in safe places where Mum and Dad say it's okay, and avoid dangerous areas.

Keep your eyes ahead: Stay focused while cycling, watch the road, and don't look around distractedly.

Slow down: Riding at a gentle pace is safer—and cooler!

Keep clear of cars and crowds: Spot vehicles, pedestrians, and small animals early, then ease to a stop.

Safety first, happy cycling! Wishing you and your little ones delightful outdoor adventures!

⚠ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

3. What's in the Box

Upon unboxing, please verify that all components are present and undamaged. The package should contain:

• Electric Dirt Bike (main body)
• Front Wheel
• Handlebar
• Headlight Assembly
• Kickstand
• Footpegs
• Charger
• Installation Manual
• Brand Card
• Tool Bag
• Assorted Tools (Allen wrenches, spanners)
• Pump

Figure 2: Included accessories for the iScooter A14 Electric Dirt Bike.

4. Assembly Instructions

Watch the full assembly video for a visual guide:

Video 1: Unboxing and Assembly Guide for iScooter A14 Electric Dirt Bike.

4.1. Handlebar Installation

1. Unscrew the bolts on the handlebar clamp using an Allen wrench.
2. Place the handlebar into the clamp, ensuring it is centered and aligned.
3. Re-insert and tighten the bolts securely.

4.2. Headlight Assembly and Installation

1. Attach the headlight brackets to the headlight unit using the provided screws.
2. Mount the assembled headlight unit to the front fork of the bike, aligning the holes.
3. Secure the headlight with the nuts and bolts, tightening them with a spanner and Allen wrench.
4. Connect the headlight cable to the corresponding port on the bike.

4.3. Front Wheel Installation

1. Align the front wheel with the front fork.
2. Insert the axle through the fork and wheel hub.
3. Secure the wheel by tightening the axle nuts on both sides with a spanner.

4.4. Kickstand Installation

1. Locate the mounting points for the kickstand on the bike frame.
2. Attach the kickstand using the provided screws and Allen wrench, ensuring it is firmly secured.

4.5. Footpegs Installation

1. Identify the footpeg mounting holes on the bike frame.
2. Insert the footpegs and secure them with the provided bolts and Allen wrench.

4.6. Connecting Main Power Cable

1. Locate the main power cables, typically near the battery compartment.
2. Carefully connect the male and female connectors, ensuring a snug fit.

5. Charging the Battery

Before the first ride, fully charge the battery. The charging port is located on the side of the bike's main body.

1. Ensure the bike is turned off.
2. Connect the charger to a power outlet. The charger indicator light will turn red.
3. Open the charging port cover on the bike and plug in the charger.
4. The charger indicator light will turn green when charging is complete.
5. Disconnect the charger from the bike and then from the power outlet.
6. Close the charging port cover.

Important Battery Safety:

• Use only the original charger, and ensure charging is supervised by an adult.
• Keep away from flammable items during charging; never cover the charger or battery.
• Do not charge indoors, in high temperatures, or in direct sunlight.
• If the battery is unused for extended periods, perform a charge-discharge maintenance cycle every three months.

6. Operating Instructions

6.1. Power On/Off

1. Insert the key into the ignition slot.
2. Turn the key to the 'ON' position to power on the bike. The LCD display will light up.
3. To power off, turn the key to the 'OFF' position and remove it.

6.2. Speed Modes

The iScooter A14 features three adjustable speed modes for different skill levels and environments. The current speed mode is indicated by a colored light and on the LCD display.

Figure 3: Speed mode indicators and switching instructions.

• Green Light (E mode): Approximately 8 km/h (5 mph) - Beginner mode.
• Blue Light (N mode): Approximately 13 km/h (8 mph) - Intermediate mode.
• Red Light (S mode): Approximately 27 km/h (17 mph) - Advanced mode.

To switch between modes, press the 'M' key on the handlebar display twice quickly.

6.3. Headlight Operation

The bike is equipped with an ultra-bright LED headlight for visibility.

Figure 4: Ultra-bright lighting system details.

Press the light switch on the left handlebar to turn the headlight on or off.

6.4. Horn Operation

The bike includes a horn for alerting others.

Figure 5: Handlebar controls for light and horn.

Press the horn switch on the left handlebar to activate the horn.

6.5. Bluetooth Connection

The A14 model is compatible with Bluetooth for audio playback.

Figure 6: Bluetooth connection steps.

1. Turn on the Bluetooth function on your mobile device.
2. Search for available devices and find the Bluetooth name "A14".
3. Click "A14" to connect.

6.6. LCD Instrument Display

The clear LCD instrument provides real-time riding data.

Figure 7: Clear LCD Instrument display details.

• Real-time Speed: Displays current speed.
• Speed Level: Shows the active speed mode (E, N, S).
• Odometer: Tracks total distance traveled.
• Headlight ON: Indicator for headlight status.
• Battery Level: Shows remaining battery charge.

6.7. Braking System

The bike is equipped with grip-operated electronic brakes and rear disc brakes for reliable stopping power.

Figure 8: Rear disc brake system.

To brake, gently squeeze the brake levers on the handlebars. Apply even pressure for smooth and controlled stopping.

7. Maintenance

• Regular Cleaning: Clean the bike regularly with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
• Tire Pressure: Check tire pressure before each ride. Maintain recommended pressure for optimal performance and safety.
• Brake Inspection: Regularly inspect brake levers, cables, and disc brakes for wear and proper function. Adjust or replace components as needed.
• Fasteners: Periodically check all screws and fasteners to ensure they are tight.
• Battery Care: Follow the charging and battery safety guidelines in Section 5. Store the bike in a cool, dry place when not in use.
• Shock Absorbers: The bike features a double shock absorption system (front sleeve absorber + rear spring absorber). Inspect them for any damage or leaks.

Figure 9: Double shock absorption system.

8. Troubleshooting

If you encounter issues not listed here or require replacement parts (e.g., charger, rear wheel rim), please contact customer support for assistance.

9. Specifications

Figure 10: Detailed product specifications.

Figure 11: Product dimensions and weight.

10. User Tips

• Maximum Load: The bike has a maximum load capacity of 80 kg (176 lbs). Ensure this limit is not exceeded for safe operation.
• Seat Height: The unfolded height of the bike is 83 cm, which gives an approximate seat height. Ensure your child can comfortably reach the ground with their feet for stability.
• Bluetooth Music: Take advantage of the built-in Bluetooth speaker to play music or audiobooks during rides, enhancing the fun.

11. Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please refer to the contact details provided on the brand card included in your package or visit the official iScooter website. Keep your proof of purchase for any warranty claims.