1. Introduction and Overview
The Intelamp Solar Light YL005-16B is a high-performance outdoor lighting solution designed for various applications such as gardens, yards, paths, and garages. This solar-powered wall lamp features two operating modes, an advanced motion sensor, and super bright LED illumination. Its robust IP65 waterproof rating ensures reliable operation in diverse weather conditions.
Key features include:
- High-Brightness Illumination: Provides up to 1200 lumens of bright light.
- Efficient Solar Charging: Fully charges in approximately 5 hours under intense sunlight, offering all-night lighting.
- Intelligent Mutual Control and Sensing: Lights can communicate, triggering nearby units to illuminate when motion is detected, providing advanced path lighting.
- Dual Sensing & Wide Angle: Equipped with two motion sensors for enhanced sensitivity and dual light surfaces offering a 240° lighting angle.
- Durable Design: Constructed with high-quality ABS material and designed to manage internal temperatures for extended lifespan.
- IP65 Waterproof: Built to withstand various outdoor weather conditions.


2. Setup and Installation
The Intelamp Solar Light is designed for easy, self-contained installation. No complex wiring is required.
2.1 Package Contents
Before installation, ensure all components are present:
- Intelamp Solar Light unit
- Remote control
- Installation accessories (Ties, Screws, Rubber stoppers)

2.2 Choosing an Installation Location
Select a location that receives direct sunlight for most of the day to ensure optimal charging. The light can be installed on walls, fences, or poles.

2.3 Mounting the Light
- Mark Drilling Points: Hold the light unit against the desired surface and mark the positions for the screws.
- Drill Holes: Use an appropriate drill bit to create holes at the marked positions. Insert rubber stoppers if necessary for a secure fit.
- Secure the Light: Align the light with the holes and secure it using the provided screws.
- Adjust Solar Panel Angle: The solar panel's angle can be adjusted to maximize sun exposure. Aim for an angle that allows the panel to face the sun directly for the longest period during the day. An installation height between 2-5 meters is recommended for optimal irradiation ranges.

3. Operating Instructions
The Intelamp Solar Light operates automatically at dusk and can be controlled and customized using the included smart remote control.
3.1 Automatic Operation
The light will automatically turn on when it gets dark and charge during the day. It features two primary lighting modes:
- Long Light + Induction Mode: Provides continuous low-level illumination, brightening to full intensity upon motion detection.
- Sensing Mode: Remains off until motion is detected, then illuminates at full brightness. This mode is more energy-efficient and ideal for long-term use, especially in winter or on rainy days.

3.2 Smart Remote Control Functions
The remote control allows for customization of the light's behavior:

- Turn On/Off: Dedicated buttons to manually switch the light on or off.
- Induction Delay: Adjusts the time the light stays at high brightness after motion is no longer detected.
- Long-lasting Timing: Sets the duration for the light to automatically turn on at dusk (e.g., 2 hours, 3 hours, 6 hours). After the set time, the light will switch to a lower brightness or turn off.
- Brightness Adjustment: Select desired brightness levels (60%, 80%, 100%). This can be used to conserve battery in winter or on rainy days.
- Sensing Mode: Activates the motion-only sensing mode.
- Long Light Mode: Activates the continuous low-level illumination mode.
3.3 Intelligent Linkage Function
When multiple Intelamp solar lights are installed within a 20-meter (66ft) radius, they can communicate. If one light detects motion, it sends a signal to nearby lights, causing them to illuminate in advance (up to 30m), providing a continuous illuminated path.


4. Maintenance
To ensure optimal performance and longevity of your Intelamp Solar Light, follow these simple maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and efficient charging.
- Check Mounting: Periodically inspect the mounting screws and brackets to ensure the light is securely attached and has not shifted, especially after strong winds or storms.
- Optimize Placement: Ensure no new obstructions (e.g., growing trees, new structures) are blocking direct sunlight from reaching the solar panel.
- Battery Longevity: The design, which includes the solar panel shading the lamp body, helps reduce internal temperatures, contributing to a longer battery and product lifespan.

5. Troubleshooting
If your Intelamp Solar Light is not functioning as expected, consider the following common issues and solutions:
- Light Not Turning On at Night:
- Insufficient Charge: Ensure the solar panel is receiving at least 5 hours of direct sunlight daily. Relocate the light if necessary to a sunnier spot. Clean the solar panel surface.
- Mode Setting: Check the remote control settings. The light might be in a mode that requires motion or a specific timer setting.
- Battery Depletion: In prolonged cloudy or rainy weather, the battery might not fully charge. Allow several sunny days for a full recharge.
- Light Not Brightening with Motion:
- Sensor Obstruction: Ensure the motion sensors are clear of obstructions (e.g., dirt, spiderwebs, foliage).
- Sensor Range: Verify that the motion is occurring within the 180° dual sensor range.
- Battery Level: If the battery is low, the light might not activate at full brightness.
- Lights Not Linking (Mutual Control):
- Distance: Ensure the lights are installed within the 20-meter (66ft) effective range for the linkage function.
- Obstructions: Large physical obstructions between lights might interfere with the signal.
- Reduced Brightness or Short Lighting Time:
- Weather Conditions: Prolonged cloudy or rainy days can lead to insufficient charging, resulting in lower brightness or shorter illumination periods. Use the sensing mode or lower brightness settings via the remote to conserve power during such periods.
- Battery Health: Over time, battery capacity can decrease. Ensure proper charging conditions are met.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | YL005-16B |
| Power Source | Solar |
| Light Source | LED bulbs (Bulbs Included: Yes) |
| Product Brightness | Induction 1200 lumens |
| Is Dimmable | Yes (via remote control) |
| Solar Cell Type | Lithium Battery |
| Full Light Battery | 3.2V/4000mAh (Lithium Iron Phosphate) |
| Solar Panel | 5V/800mA (Single Crystal Silicon) |
| Charging Time | Approx. 5 hours (strong sunlight) |
| Lighting Time | Long periods in sensing mode |
| Protection Level | IP65 |
| Body Material | ABS |
| Installation Method | Self-contained |
| Motion Sensors | Dual induction head |
| Sensor Range | 180° |
| Illumination Angle | 240° (dual light surfaces) |
| Linkage Range | Up to 20m (66ft) between units |
| Product Dimensions | 216mm (W) x 126mm (D) x 240mm (H) |
| Package Dimensions | 28cm (L) x 13cm (W) x 5cm (H) |
| Package Weight | 0.6 kg |
| Certifications | CE, FCC, GS, LVD, ROHS, UL |

7. User Tips
Maximize your experience with the Intelamp Solar Light with these helpful tips:
- Optimal Solar Panel Placement: Always ensure the solar panel is positioned to receive maximum direct sunlight throughout the day. Even a slight obstruction can significantly impact charging efficiency and night-time performance.
- Utilize Sensing Mode in Winter: During shorter winter days or prolonged cloudy periods, switch to the 'Sensing Mode' via the remote control. This conserves battery power by only activating when motion is detected, ensuring longer operational times.
- Strategic Installation for Linkage: If you have multiple units, install them within 20 meters of each other to fully benefit from the intelligent linkage function, creating a seamlessly lit path as you approach.
- Regular Cleaning: A quick wipe of the solar panel and sensor lenses every few weeks can prevent dust and debris buildup, maintaining optimal charging and motion detection.
8. Warranty and Support
The Intelamp Solar Light YL005-16B comes with a 2-year warranty, ensuring peace of mind regarding product quality and performance. Intelamp is committed to providing reliable products and customer satisfaction.
For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly through your purchase platform. Please have your model number (YL005-16B) and purchase details ready when contacting support.