Manuals+

hippcron Qidong-01

Hippcron Car Alarm Auto Start Stop System

Model: Qidong-01

1. Product Overview

The Hippcron Qidong-01 is a comprehensive car alarm and keyless entry system designed to provide convenience and security for your vehicle. It features a push-button start/stop function, remote engine start/stop, smart door locking, and advanced anti-theft capabilities.

Hippcron control unit, push-button, and circuit board
Figure 1: Hippcron control unit, push-button start/stop, and circuit board. The control unit displays Voltage 12V+2V, Current <15mA, and Frequency 433.92MHZ.

Key Features:

  • Remote Engine Start/Stop
  • Smart Engine Stop
  • Smart Door Lock
  • Extreme Cold Weather Engine Start
  • Anti-theft System
  • High Temperature Protection
Diagram showing 6 main features
Figure 2: Diagram illustrating the 6 main features of the system.

2. Installation and Setup

Professional installation is highly recommended for this product. Ensure the vehicle's battery is disconnected before beginning installation.

Wiring Diagram:

The following diagram illustrates the connections required for the system. Pay close attention to each pin's function.

Detailed wiring diagram for XY-Q638
Figure 3: Detailed wiring diagram for the XY-Q638 control unit. Key connections include: Brown wire (+)Output to Ignition2, Yellow wire (+)Output to Starter, Blue wire (+)Output to ACC accessory, Black wire (-)Ground, Red wire (+)12V Power, White wire (+)Output to Ignition, White wire (+)oil path detection input, Black (-)Hand brake, Brown (-)Immobilizer input, Blue (+)Foot brake input, Green (-)Door lock output, Yellow (+)12V Positive signal input (-500MA). The 6th pin port connects to central locking by default.

Key Installation Requirements:

  • The 1st pin port connects to the oil pump motor.
  • The 2nd pin port connects to the handbrake.
  • The 6th pin port connects to the central locking line. This can be customized if needed.
  • For anti-theft functionality, the 3rd pin port needs to be connected to an anti-theft device.

Anti-theft Device Connection:

The system requires an existing original or aftermarket anti-theft device in the car for full anti-theft integration.

Anti-theft connection diagram
Figure 4: Diagram showing the connection of the control unit to an aftermarket anti-theft device.

3. Operating Instructions

Push Start and Stop Operations:

  1. To enter ACC/ON/OFF status without starting the engine:
    • Do not step on the brake.
    • Short press the Start/Stop button once: The car enters ACC status.
    • Short press again: The car enters ON status.
    • Short press one more time: The car enters OFF status.
  2. To start/stop the engine:
    • Step on and hold the brake.
    • When the engine is OFF, press and release the START/STOP button to start the engine. The start control button LED will remain on.
    • When the engine is ON, press and release the START/STOP button to stop the engine. The start control button LED will turn off.
Before and After image of key ignition vs push button start
Figure 5: Comparison of traditional key ignition and the modern push-button start/stop.

Remote Engine Start/Stop:

This function allows you to warm up or cool down your car in advance for comfort using your original car remote keys.

  1. Ensure the handbrake is engaged.
  2. Press the Lock button on your original car remote key 3 times within 5 seconds.
  3. The car engine will start or stop remotely.
Remote Start/Stop operation illustration
Figure 6: Illustration of the remote start/stop operation, emphasizing handbrake engagement and pressing the lock button three times.

Smart Features:

  • Smart Engine Stop: If the engine is remote started and no one operates the car (door not opened or brake not tapped) within 15 minutes, the engine will shut down automatically.
  • Smart Door Lock: After a remote start, the doors remain locked. You must unlock the door to enter the car, ensuring security.
  • Anti-theft Device Conjunction: When the car is locked, the engine cannot be started even if a door is forcibly opened.
  • Handbrake Self-Test: Remote start will not function if the handbrake is not engaged, preventing accidental car rollaway.
Convenient and Safe features illustration
Figure 7: Visual representation of Smart Engine Stop, Smart Door Lock, Anti-theft device conjunction, and Handbrake self-test features.

4. Maintenance

The Hippcron system is designed for durability and reliability with high-quality components.

Push Button:

  • Made from silicone for comfortable use.
  • Chrome-plated and polished for a sleek finish.
  • Permanent rust-resistant properties.
  • Designed for over 300,000 activations, ensuring a long lifespan.
High Quality Button details
Figure 8: Details of the high-quality push button, including material, finish, and lifespan.

Circuit Board:

  • Features silver contact pins for superior performance.
  • Offers better conductivity.
  • Designed for high power applications.
  • Ensures long life and high stability.
High Quality Circuit Board details
Figure 9: Close-up of the high-quality circuit board with silver contact pins, highlighting its conductivity, power, and stability.

5. Troubleshooting

  • Remote Start/Stop Not Working: Ensure the handbrake is fully engaged. The remote start/stop function is disabled if the handbrake is released for safety.
  • Out of Range: Remote start/stop will not function if the car is outside the key's control distance. Move closer to the vehicle.
  • Engine Shuts Down After Remote Start: If the engine was remote started and no one enters the car (door not opened or brake not tapped) within 15 minutes, the system will automatically shut down the engine for safety and fuel efficiency.
  • Difficulty Starting in Cold Weather: In very cold winter conditions, if a short press of the start button does not start the engine, try pressing and holding the button for 3 seconds.

6. Specifications

AttributeValue
Brand Namehippcron
Model NameQidong-01
OriginMainland China
Voltage12V+2V
Current<15mA
Frequency433.92MHZ
Item Weight270g
Button Diameter52mm
Button Depth40mm
Package Length19 cm
Package Width17 cm
Package Height4 cm
Package Weight0.278 kg

7. User Tips

  • Always ensure your handbrake is engaged before attempting remote start to prevent unexpected vehicle movement.
  • Keep your original car remote keys in good working order, as they are essential for the remote start/stop function.
  • If you remote start your car, remember to enter and operate the vehicle within 15 minutes to prevent the engine from automatically shutting down.
  • For optimal performance and safety, consider professional installation of the system.

8. Warranty and Support

For detailed information regarding warranty coverage and technical support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF here: Hippcron Qidong-01 User Manual (PDF).

If you encounter any issues not covered in this manual or the PDF, please contact the seller or manufacturer's customer support for assistance.