1. Introduction
Thank you for choosing the ROBORE X5 Walking Pad. This compact and powerful treadmill is designed to provide an effective and convenient workout experience in your home. Featuring a 16% adjustable incline, triple shock absorption, and a quiet 2.5HP brushless motor, the X5 supports walking, jogging, and running up to 10 km/h, with a maximum load capacity of 150 kg. Please read this manual thoroughly before use to ensure safe operation and optimal performance.
2. Safety Information
- Always consult with a physician before starting any exercise program.
- Place the walking pad on a flat, stable surface, ensuring adequate clearance around the unit.
- Keep children and pets away from the walking pad during operation.
- Wear appropriate athletic footwear and clothing.
- Do not operate the walking pad if it is damaged or malfunctioning.
- Ensure the power cord is not pinched or damaged.
- Do not use the walking pad outdoors or in wet conditions.
- Always step onto the running belt carefully and start at a low speed.
3. Package Contents
Carefully unpack your ROBORE X5 Walking Pad and ensure all items are present:
- 1 x ROBORE X5 Walking Pad
- 1 x User Manual
- 1 x Remote Control (for operation)
4. Product Overview & Features
The ROBORE X5 Walking Pad is engineered for performance, comfort, and convenience:
Key Features:
- Adjustable 16% Incline: Manually adjust the incline to 0%, 12%, or 16% to simulate hill training, increase calorie burn by up to 60%, and boost cardiovascular endurance.
- Triple Shock Absorption System: Features a 2-layer running board, a 7-layer running belt, 4 wave rubber pads, and 8 silicone shock absorbers for superior knee protection and comfort.
- Quiet 2.5 HP Brushless Motor: A durable motor with a lifespan of over 3500 hours, operating at a low noise level of less than 45 dB, ensuring a quiet workout environment. It is also energy-efficient, consuming less than 0.5 kilowatt-hours.
- Variable Speed Control: Supports speeds from 1.0 km/h up to 10 km/h, suitable for walking, jogging, and running.
- Bright & Clear Digital Display: Monitor your workout data including Time, Speed, Distance, and Calories in real-time.
- Compact & Space-Saving Design: Designed for easy movement with built-in wheels and convenient storage under furniture, with an overall height of 13.2 cm.
- High Load Capacity: Supports users up to 150 kg (300 lbs).

Image: ROBORE X5 Walking Pad showcasing its 16% incline capability.

Image: Bright and clear digital display showing Time, Speed, Distance, and Calories, operated via remote control.

Image: Illustration of the 3-level manual incline adjustment (0%, 12%, 16%) and its benefits for calorie burn.

Image: Diagram highlighting the quiet and powerful 2.5HP brushless motor.

Image: Detailed view of the 6 shock pads and the 7-layer non-slip running belt for enhanced comfort and safety.
5. Setup
- Unpacking: Carefully remove the walking pad from its packaging. Retain packaging for future storage or transport.
- Placement: Place the walking pad on a firm, level surface. Ensure there is at least 0.6 meters (2 feet) of clear space on all sides and 2 meters (6.5 feet) at the rear for safety.
- Power Connection: Plug the power cord into a grounded electrical outlet. Ensure the power switch on the walking pad is in the OFF position before plugging it in.
- Incline Adjustment: The ROBORE X5 features a manual incline. To adjust, lift the rear of the walking pad and position the support legs to the desired incline level (0%, 12%, or 16%). Ensure both sides are set equally and securely before use.

Image: The walking pad features wheels for easy movement and a compact design for storage under furniture.
6. Operating Instructions
The ROBORE X5 Walking Pad is operated using the included remote control.
- Power On: Ensure the walking pad is plugged in and the main power switch is ON. The digital display will illuminate.
- Start/Stop: Press the 'Start' button on the remote control to begin. The belt will start moving at a low speed. Press 'Stop' to pause or end your workout.
- Speed Adjustment: Use the '+' and '-' buttons on the remote control to increase or decrease the speed. The speed range is 1.0 km/h to 10.0 km/h.
- Workout Modes: The walking pad supports three main modes, which can be adjusted by speed:
- Walking & Working Mode: 1.0 - 4.0 km/h
- Jogging Mode: 4.0 - 7.0 km/h
- Running Mode: 7.0 - 10.0 km/h
- Monitoring Progress: The digital display will show your workout metrics: Time, Speed, Distance, and Calories burned.
- Power Off: After your workout, press the 'Stop' button, then turn off the main power switch and unplug the unit from the wall outlet.

Image: Illustration of the three distinct workout modes: Walking & Working, Jogging, and Running, with their respective speed ranges.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ROBORE X5 Walking Pad.
- Cleaning: After each use, wipe down the walking pad with a damp cloth to remove sweat and dust. Do not use abrasive cleaners or solvents.
- Belt Lubrication: To maintain smooth operation and extend belt life, lubricate the running belt every 3-6 months, or after approximately 100 hours of use. Use a silicone-based treadmill lubricant. Lift the edge of the running belt and apply a small amount of lubricant to the center of the deck. Run the treadmill at a low speed for a few minutes to distribute the lubricant.
- Belt Tension & Alignment: Periodically check the running belt for proper tension and alignment. If the belt slips or drifts to one side, refer to the troubleshooting section or consult customer support.
- Storage: When not in use, store the walking pad in a dry, cool place, away from direct sunlight and moisture. Its compact design allows for convenient storage under beds or sofas.
8. Troubleshooting
If you encounter any issues with your ROBORE X5 Walking Pad, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Walking pad does not power on | Power cord not properly connected; Main power switch off; Circuit breaker tripped | Check power cord connection; Ensure main power switch is ON; Reset circuit breaker |
| Running belt slips or hesitates | Belt tension too loose; Insufficient lubrication | Adjust belt tension (refer to specific instructions in full manual if available); Lubricate the running belt |
| Running belt drifts to one side | Belt alignment off | Adjust belt alignment using the rear roller bolts (turn 1/4 turn clockwise on the side the belt is drifting towards) |
| Unusual noise during operation | Loose components; Lack of lubrication; Motor issue | Check for and tighten any loose screws; Lubricate belt; If noise persists, contact customer support |
| Remote control not responding | Dead batteries; Remote not paired | Replace batteries; Refer to full manual for remote pairing instructions |
If the problem persists after attempting these solutions, please contact ROBORE customer support for assistance.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | ROBORE |
| Model | X5 |
| Type | Treadmill / Walking Pad |
| Color | Black |
| Maximum Speed | 10 km/h |
| Incline | Adjustable up to 16% (Manual 3-level: 0%, 12%, 16%) |
| Maximum Load Capacity | 150 kg (300 lbs) |
| Motor Type | 2.5 HP Brushless Motor |
| Noise Level | < 45 dB |
| Running Belt Length | Approx. 93-94 cm (37 inches) |
| Running Belt Width | Approx. 38-40 cm (15.2 inches) |
| Screen | Yes, Digital Display |
| Product Weight | 15.2 kg |
| Product Dimensions (L x W x H) | 114.7 x 50.9 x 13.2 cm |
| Training Site | Legs, Other (Cardio Training) |
10. Warranty and Support
The ROBORE X5 Walking Pad comes with a standard manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, troubleshooting assistance, or spare parts, please contact your retailer or the ROBORE customer service department.
11. User Tips
- Regular Lubrication: To ensure the longevity and smooth operation of your walking pad, remember to lubricate the running belt regularly. While some treadmills are self-lubricating, the ROBORE X5 requires manual lubrication every few months or after significant use. This prevents friction and wear, extending the life of your machine.
- Start Slow: Always begin your workout at the lowest speed setting and gradually increase it as you get comfortable.
- Stay Hydrated: Keep a water bottle nearby to stay hydrated during your workout.
- Listen to Your Body: If you feel pain, dizziness, or shortness of breath, stop exercising immediately.