MOES Matter Tuya WiFi Smart Concave Glass Panel Light Switch

1. Introduction

Thank you for choosing the MOES Matter Tuya WiFi Smart Concave Glass Panel Light Switch. This smart switch is designed to enhance your home automation experience, offering seamless integration with various smart home platforms and voice assistants. It features a modern concave glass panel design, requiring a neutral wire for installation.

This manual provides detailed instructions for the safe installation, setup, and operation of your new smart light switch. Please read it thoroughly before installation and keep it for future reference.

Figure 1: MOES Smart Concave Glass Panel Light Switch (EU 3 Gang White variant shown)

2. Safety Information

WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician.

• Always disconnect power at the circuit breaker before installing or servicing the switch.
• Ensure the switch is rated for your electrical system's voltage and current.
• A neutral wire is required for the operation of this smart switch. If your wiring does not include a neutral wire, consult a qualified electrician.
• Do not install with wet hands or when standing on wet or damp surfaces.
• This device is for indoor use only.
• Keep out of reach of children.

3. Package Contents

Please check the package for the following items:

• Smart Switch *1
• Screws *1 set
• Instruction Manual *1

4. Technical Specifications

5. Dimensions

The smart switch is available in different regional sizes. Please verify your specific model's dimensions:

Figure 2: EU Version Dimensions (86mm x 86mm)

Figure 3: US Version Dimensions (118mm x 72mm)

6. Installation

Before you begin, ensure the power is OFF at the circuit breaker to prevent electric shock.

1. Prepare the Wiring:

   Identify the Live (L), Neutral (N), and Load (L1, L2, L3, L4 depending on gang count) wires in your wall box. A neutral wire is essential for this smart switch. If you do not have a neutral wire, this switch is not compatible with your current wiring setup.

   

   Figure 4: Wiring Diagram (EU Version shown, US version wiring is similar)

2. Connect the Wires:

   Connect the Live wire to the 'L' terminal, the Neutral wire to the 'N' terminal, and your light's load wires to the 'L1', 'L2', 'L3', 'L4' terminals as appropriate for your switch gang configuration. Ensure all connections are secure by tightening the screw terminals.

3. Mount the Switch:

   Carefully push the wired switch module into the wall box. Secure the switch to the wall box using the provided screws.

4. Attach the Glass Panel:

   Align the glass panel with the switch module and gently press it into place until it clicks securely. Remove any protective film from the glass panel.

5. Restore Power:

   Turn the power back ON at the circuit breaker. The switch indicator should light up, indicating it's ready for setup.

7. Smart Home Setup

This smart switch supports Matter, Tuya WiFi, Alexa, Google Home, Apple Home, and SmartThings for cross-platform connectivity.

Figure 5: Matter Cross-Platform Connectivity

Figure 6: Supported Smart Home Platforms

7.1. App Pairing (Tuya Smart / Smart Life App)

1. Download the Tuya Smart or Smart Life app from your smartphone's app store (iOS or Android).

2. Register or log in to your account.

3. Ensure your phone is connected to a 2.4GHz Wi-Fi network.

4. Open the app, tap '+' or 'Add Device'.

5. Follow the in-app instructions to put the switch into pairing mode. This usually involves pressing and holding a button on the switch for a few seconds until the indicator light blinks rapidly.

6. The app will detect the device. Confirm the Wi-Fi network and password.

7. Once connected, you can rename the switch and assign it to a room.

7.2. Matter Integration

For Matter-compatible devices, you can add the switch to your preferred Matter ecosystem (e.g., Apple Home, Google Home, SmartThings) using the Matter pairing code (QR code) found on the device or its packaging. Follow the specific instructions provided by your Matter controller app.

8. Operating Instructions

8.1. Manual Control

Simply touch the concave glass button(s) on the switch panel to manually turn the connected lights ON or OFF.

Figure 7: Concave Glass Button

8.2. App Control

Using the Tuya Smart or Smart Life app, you can control your lights remotely and access advanced features:

• Timing Function:

  Set schedules, countdowns, circulate, random, or inching timers to automatically turn lights ON/OFF. This adds convenience and helps save energy.

  

  Figure 8: Timing Functions

• Indicator Status Settings:

  Customize the behavior of the indicator light through the app:

  • **Indicate switch position:** The indicator lights up when the main light is OFF, helping you locate the switch in the dark.
  • **Indicate switch on/off:** The indicator light mirrors the ON/OFF status of the main light.
  • **Indicator off:** Turn off the indicator light completely.
  

  Figure 9: Indicator Status Settings

• Power-on Status Settings:

  Configure the switch's state after a power outage:

  • **Power-off:** The switch remains OFF after power is restored.
  • **Power-on:** The switch turns ON after power is restored.
  • **Restart Memory:** The switch returns to its last known state before the power outage.
  

  Figure 10: Power-on Status Settings

• Backlight ON/OFF:

  Toggle the button backlight ON or OFF via the app for comfortable use in various lighting conditions.

  

  Figure 11: Backlight Control

8.3. Voice Control

Integrate your smart switch with voice assistants like Amazon Alexa, Google Assistant, or Apple Siri (via HomeKit) for hands-free control. Once linked, you can use commands such as:

• "Alexa, turn on the living room light."
• "Hey Google, dim the kitchen lights to 50%."
• "Siri, turn off the bedroom lamp."

Figure 12: Voice Control Capabilities

8.4. Smart Linkage Between Multiple Platforms

Leverage the Matter protocol and Tuya ecosystem to create advanced automation scenarios with other smart devices. For example:

• Link with a smart door lock to turn on lights automatically when you unlock your door.
• Combine with a human presence sensor to activate lights when motion is detected in a room.

Figure 13: Smart Linkage with Door Lock

Figure 14: Smart Linkage with Human Presence Sensor

9. Maintenance

• To clean the glass panel, gently wipe it with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the surface.
• Ensure the switch is always dry before use.
• Regularly check for firmware updates through the Tuya Smart or Smart Life app to ensure optimal performance and security.

Figure 15: Easy to Clean Toughened Glass

10. Troubleshooting

Q: The switch does not power on after installation.

A: Ensure the power is restored at the circuit breaker. Verify that the Live and Neutral wires are correctly connected to the 'L' and 'N' terminals, respectively. Confirm that a neutral wire is present in your wall box.

Q: The switch cannot connect to the Wi-Fi network.

A: Make sure your Wi-Fi network is 2.4GHz. The switch does not support 5GHz Wi-Fi. Ensure your phone is connected to the same 2.4GHz network during pairing. Check that the Wi-Fi password entered is correct. Move the switch closer to your Wi-Fi router if signal strength is weak.

Q: The indicator light is not behaving as expected.

A: Check the 'Indicator Status Settings' in the Tuya Smart or Smart Life app to ensure your preferred mode is selected (Indicate switch position, Indicate switch on/off, or Indicator off).

Q: Voice control is not working.

A: Ensure your smart switch is successfully linked to your voice assistant (Alexa, Google Home, Apple Home). Check the device name in the voice assistant app and use clear, precise commands.

11. User Tips

• Verify Wireless Protocol: Always double-check the product's wireless protocol (Wi-Fi or Zigbee) before purchase and installation to ensure compatibility with your existing smart home hub or network. This model (DS-10B1WN) uses Wi-Fi.
• Neutral Wire Check: Confirm the presence of a neutral wire in your wall box before purchasing. This is a common requirement for many smart switches and crucial for this device's functionality.
• App Customization: Explore all the settings within the Tuya Smart or Smart Life app, especially for indicator light behavior and power-on status, to personalize your experience.

12. Warranty and Support

MOES products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or the official MOES website.

Please retain your proof of purchase for warranty claims.