TTNergy TTN-AX

Contents

TTNergy AX Series Pure Sine Wave Solar Hybrid Inverter User Manual

Models: TTN AX-7.2KW, TTN AX-8.2KW, TTN AX-10.2KW

1. Introduction

The TTNergy AX Series is a multi-function inverter/charger designed to provide uninterruptible power support for solar hybrid systems. It integrates the functions of an inverter, solar charger, and battery charger into a compact unit. The comprehensive LCD display allows users to configure various settings, including battery charging current, AC/solar charger priority, and acceptable input voltage, to suit different applications.

2. Key Features

  • Pure sine wave output for reliable power supply.
  • High output power factor of 1.0.
  • Integrated Wi-Fi and Bluetooth connectivity for iOS and Android monitoring.
  • Capable of running without a battery.
  • One-key restoration to factory settings for easy reset.
  • Automatic activation for lithium batteries.
  • Built-in MPPT solar charger: 140A for 7.2KW model, 160A for 8.2KW and 10.2KW models.
  • Wide PV input voltage range: 90-500VDC.
  • Equipped with an anti-dust kit for enhanced durability in harsh environments.
  • Smart battery charge design to optimize battery life.
  • Features dual output and dual PV input.
  • User-friendly touch button interface.
  • Supports both On-Grid and Off-Grid work modes.
  • Communication capabilities with lithium batteries.
TTNergy Hybrid AX Smart Inverter Features Diagram

Figure 1: Overview of TTNergy Hybrid AX Smart Inverter features and specifications.

3. Specifications

ParameterTTN AX-7.2KWTTN AX-8.2KWTTN AX-10.2KW
Phase1-Phase
Maximum PV Input Power8200W8200W5400W+5400W
Rated Output Power7200W/7200VA8200W/8200VA10200W/10200VA
Maximum Solar Charging Current140A160A160A
Grid-Tie Operation PV Input (DC)
Nominal DC Voltage/Max DC Voltage360/500VDC
Start-up Voltage / Initial Feeding Voltage90VDC/120VDC
MPPT Voltage Range90-450VDC
Maximum Input Current1/23A1/23A2/18A
Nominal Output Voltage220/230/240VAC
Output Voltage Range195.5-253VAC
Nominal Output Current31.3A35.6A44.3A
Power Factor>0.99
Efficiency
Maximum Conversion Efficiency (DC/AC)98%
Two Load Output Power
Full Load7200W8200W10200W
Maximum Main Load7200W8200W10200W
Maximum Second Load (Battery Mode)2400W2733W3400W
Maximum Load Cut Off Voltage52VDC
Maximum Load Return Voltage54VDC
Off-Grid Operation AC Input
AC Start-up Voltage / AC Restart Voltage120-140VAC/180VAC
Acceptable Input Voltage Range90-280VAC or 170-280VAC
Frequency Range49-51 ±1HZ
Maximum AC Input Current40A40A50A
Off-Grid Operation PV Input (DC)
Nominal DC Voltage/Max DC Voltage360/500VDC
MPPT Voltage Range90-450VDC
Maximum Input Current1/23A2/18A2/18A
Battery Mode Output (AC)
Nominal Output Voltage220/230/240VAC
Output WaveformPure sine wave
Efficiency (DC to AC)94%
Battery & Charger
Nominal DC Voltage48VDC
Maximum Solar Charging Current140A160A160A
Maximum AC Charging Current120A140A140A
Maximum Charging Current140A160A160A
Physical
Dimensions (D x W x H)500x390x130mm588x463x205mm618x463x205mm
Net Weight13.5KG14.5KG15KG
Gross Weight14.9KG16.1KG16.2KG
Interface
Communication PortRS232/RS485/WIFI/GPRS/LITHIUM BATTERY
Environment
Humidity5% to 95% Relative Humidity (Non-condensing)
Operating Temperature-10°C to 50°C
Standard
ComplianceCE

4. Setup and Installation

Installation of the TTNergy AX Series inverter should be performed by qualified personnel to ensure safety and optimal performance. Refer to the detailed wiring diagrams and instructions provided in the full product manual for specific connection procedures.

4.1 Physical Overview

Video 1: Product overview of the TTNergy solar inverter, highlighting its features and connection ports.

The inverter features a robust design with clearly labeled connection points. Key interfaces include:

  • AC In: For connecting to the utility grid.
  • Main Out & Second Out: For connecting to primary and secondary loads.
  • PV Cover: Protects the solar input terminals.
  • Switch: Main power switch for the unit.
  • RS232 & RS485: Communication ports.
  • WIFI & BMS: Modules for wireless communication and Battery Management System integration.
  • Battery (+/-): Terminals for battery connection.
Rear view of TTNergy solar inverter showing connection ports

Figure 2: Rear view of the TTNergy solar inverter, detailing the various connection ports.

4.2 Wiring Connections

Ensure all connections are secure and correctly polarized. Pay close attention to the PV input voltage range (90-500VDC) and battery connections. The inverter supports automatic activation for lithium batteries.

Installed inverter system with wiring

Figure 3: Example of an installed TTNergy inverter system with visible wiring connections.

Inverter and battery system with complex wiring

Figure 4: Another view of an inverter and battery system, showing more complex wiring for a complete setup.

5. Operating Instructions

The TTNergy AX Series inverter features a user-friendly LCD display and touch buttons for easy operation and configuration.

5.1 Initial Power-Up

After all connections are securely made, turn on the main switch. The LCD display will illuminate, guiding you through the initial setup or displaying operational status.

5.2 User Configuration

Use the navigation buttons on the display to access and adjust settings such as:

  • Battery Charging Current: Adjust according to your battery specifications.
  • AC/Solar Charger Priority: Select whether the inverter prioritizes AC input or solar power for charging.
  • Input Voltage Range: Set the acceptable input voltage range based on your specific application (e.g., appliance mode, UPS mode).
  • On/Off Grid Work Mode: Configure the inverter to operate in grid-tied, off-grid, or hybrid modes.

For detailed menu navigation and parameter adjustments, refer to the comprehensive user manual included with your product.

5.3 Remote Monitoring

Utilize the built-in Wi-Fi and Bluetooth capabilities to monitor your inverter's performance and adjust settings via a dedicated application on your iOS or Android device. Connect the inverter to your local network using the Wi-Fi module.

6. Maintenance

Regular maintenance ensures the longevity and efficient operation of your TTNergy AX Series inverter.

  • Cleaning: Keep the inverter's exterior clean and free from dust. The built-in anti-dust kit helps protect internal components, but external cleaning is still recommended.
  • Ventilation: Ensure that the ventilation openings are not obstructed to prevent overheating.
  • Connections: Periodically check all electrical connections (PV, battery, AC input/output) for tightness and signs of corrosion.
  • Battery Health: The smart battery charge design helps optimize battery life. However, regular monitoring of battery health and performance is advisable, especially for lead-acid batteries.
  • Firmware Updates: Check the manufacturer's website or the mobile application for any available firmware updates to ensure optimal performance and access to new features.

7. Troubleshooting

This section provides general guidance for common issues. For complex problems, consult a qualified technician or contact customer support.

7.1 Common Issues and Solutions

  • Inverter Not Powering On:
    - Check the main power switch on the side of the inverter.
    - Verify battery connections and voltage.
    - Ensure AC input is present if operating in hybrid or grid-tied mode.
  • No Output Power:
    - Check output circuit breakers.
    - Verify load connections.
    - Check for any error codes on the LCD display.
  • Low Solar Charging:
    - Ensure PV panels are clean and not shaded.
    - Check PV array connections and voltage within the MPPT range (90-450VDC).
    - Inspect solar charging current settings.
  • Communication Issues (Wi-Fi/Bluetooth):
    - Ensure the Wi-Fi/Bluetooth module is correctly installed and powered.
    - Check network connectivity and router settings.
    - Restart the inverter and your mobile device.

If the issue persists or an unfamiliar error code appears, record the error message and contact technical support.

8. User Tips

  • Battery-Less Operation: The inverter can operate without a battery, which can be useful for direct solar-to-load applications or as a grid-tied inverter. Ensure proper configuration for this mode.
  • Lithium Battery Compatibility: The automatic activation feature for lithium batteries simplifies setup and ensures proper charging protocols. Always verify battery compatibility with the inverter's specifications.
  • Remote Monitoring: Regularly use the mobile app to monitor system performance, energy production, and battery status. This helps in proactive maintenance and optimization.
  • Factory Reset: In case of complex configuration issues or after major system changes, the one-key factory reset can be a quick way to revert to default settings, allowing for a fresh configuration.

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product or contact your point of purchase. Technical support can be reached through the seller or manufacturer's official channels. Please have your model number and purchase details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.