TTNergy AX Series

Contents

TTNergy Hybrid Solar Inverter User Manual

Models: AX-7.2KW, AX-8.2KW, AX-10.2KW

1. Introduction

The TTNergy Hybrid Solar Inverter is a multi-function inverter/charger designed to provide uninterruptible power support for solar energy systems. It combines the functionalities of a power inverter, a solar charger, and a battery charger into a compact and portable unit. This inverter is engineered for high efficiency and reliability, offering a user-friendly interface with configurable settings for various applications.

Key benefits include higher energy yields, safe and reliable operation, smart features, and an intuitive user experience.

2. Features

  • Pure sine wave solar inverter for both on-grid and off-grid applications.
  • Output power factor of 1.0 for efficient energy delivery.
  • Integrated Wi-Fi and Bluetooth connectivity for monitoring and control via iOS and Android devices.
  • Capable of running without a battery, providing flexibility in system design.
  • One-key restoration to factory settings for easy configuration reset.
  • Built-in lithium battery automatic activation feature.
  • High PV input voltage range (90-500VDC) for broad solar panel compatibility.
  • Built-in anti-dust kit designed for enhanced durability in harsh environments.
  • Smart battery charge design to optimize battery life and performance.
  • Dual PV input for increased solar array flexibility.
  • Dual output for managing different load priorities.
  • Intuitive touch button interface for user-friendly operation.
  • Supports On/Off Grid Work Mode.
  • Communication capabilities with lithium batteries for optimized performance.
  • High-efficiency 160A MPPT solar charger (for 8.2KW and 10.2KW models) and 140A (for 7.2KW model).
TTNergy Hybrid Solar Inverter Features and Specifications Diagram
Figure 2.1: Key features and general specifications of the TTNergy Hybrid Solar Inverter.

3. Specifications

The following table details the specifications for the TTNergy AX series hybrid solar inverters:

CategoryParameterTTN AX-7.2KWTTN AX-8.2KWTTN AX-10.2KW
GeneralPhase1-Phase
Maximum PV Input Power8200W8200W5400W+5400W
Rated Output Power7200W/7200VA8200W/8200VA10200W/10200VA
Maximum Solar Charging Current140A160A160A
Grid-Tie Operation (PV Input DC)Nominal DC Voltage/Max DC Voltage360/500VDC
Start-up Voltage / Initial Feeding Voltage90VDC/120VDC
MPPT Voltage Range90-450VDC
Maximum Input Current1/23A1/23A, 2/18A1/23A, 2/18A
Nominal Output Voltage220V/230V/240VAC
Output Voltage Range195.5-253VAC
EfficiencyNominal Output Current31.3A35.6A44.3A
Maximum Conversion Efficiency (DC/AC)98%
Two Load Output PowerFull Load7200W8200W10200W
Maximum Main Load7200W8200W10200W
Maximum Second Load (Battery Mode)2400W2733W3400W
Maximum Load Cut Off Voltage52VDC
Maximum Load Return Voltage54VDC
Off-Grid Operation (AC Input)AC Start-up Voltage / Auto Restart Voltage120-140VAC/180VAC
Acceptable Input Voltage Range90-280VAC or 170-280VAC
Frequency Range49-51 ± 1Hz or 59-61 ± 1Hz
Maximum AC Input Current40A40A50A
Off-Grid Operation (PV Input DC)Nominal DC Voltage/Max DC Voltage360/500VDC
MPPT Voltage Range90-450VDC
Maximum Input Current1/23A1/23A, 2/18A1/23A, 2/18A
Battery Mode Output (AC)Nominal Output Voltage220V/230V/240VAC
Output WaveformPure Sine Wave
Efficiency (DC to AC)94%
Battery & ChargerNominal DC Voltage48VDC
Maximum Solar Charging Current140A160A160A
Maximum AC Charging Current120A140A140A
Maximum Charging Current140A160A160A

*Note: Specifications are subject to change without prior notice. Please refer to the product label for the most accurate information.

4. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your TTNergy Hybrid Solar Inverter. It is highly recommended that installation be performed by a qualified electrician or solar professional.

4.1 Safety Precautions

  • Ensure all power sources (AC utility, solar panels, batteries) are disconnected before installation or maintenance.
  • Do not connect the battery after the utility is turned on.
  • Verify correct polarity for all DC connections (PV and Battery).
  • Ensure proper grounding of the inverter.
  • Install the inverter in a well-ventilated area, away from flammable materials and direct sunlight.
  • Refer to local electrical codes and regulations for installation requirements.

4.2 Physical Installation

The inverter is designed for wall mounting. Choose a sturdy vertical surface capable of supporting the inverter's weight (approximately 17KG). Ensure adequate clearance around the unit for proper ventilation.

Front view of the white TTNergy Hybrid Solar InverterFront view of the green TTNergy Hybrid Solar Inverter
Figure 4.1: Front views of the TTNergy Hybrid Solar Inverter (white and green models).
Side view of the green TTNergy Hybrid Solar Inverter showing ventilation and switch
Figure 4.2: Side view of the inverter, highlighting the ventilation and power switch.

4.3 Electrical Connections

The inverter features clearly labeled terminals for AC input, main AC output, second AC output, PV input, and battery connections. It also includes communication ports for Wi-Fi, RS232, RS485, and BMS.

Rear view of the TTNergy Hybrid Solar Inverter showing AC, PV, Battery, and Communication ports
Figure 4.3: Rear panel connections including AC In, Main Out, Second Out, PV, Battery, RS232, RS485, WiFi, and BMS ports.
  • PV Input: Connect solar panel strings to the designated PV input terminals. Ensure the PV input voltage and current are within the inverter's specified range.
  • Battery Connection: Connect the battery bank to the BATTERY terminals, observing correct polarity (+ and -). The inverter supports lithium battery automatic activation.
  • AC Input: Connect the AC utility grid to the AC IN terminals.
  • AC Output: Connect your primary loads to the MAIN OUT terminals and secondary loads (if applicable) to the SECOND OUT terminals.
  • Communication: Utilize the RS232, RS485, WiFi, and BMS ports for monitoring and advanced system integration.

For detailed wiring diagrams and step-by-step instructions, please refer to the comprehensive user manual included with your product. An example of the manual cover is shown below:

User manual for AX 8.2KW/AX10.2KW Hybrid Solar Inverter
Figure 4.4: Example of the user manual cover for AX 8.2KW/AX10.2KW Hybrid Solar Inverter.

4.4 Installation Examples

Installed TTNergy Hybrid Solar Inverter with visible wiringVertical installation of TTNergy inverter and battery systemWall-mounted TTNergy inverter and battery setup
Figure 4.5: Various installation examples of the TTNergy Hybrid Solar Inverter in different environments.

5. Operating Instructions

Once installed and all connections are secure, you can begin operating your TTNergy Hybrid Solar Inverter.

5.1 Initial Startup

  1. Ensure all external circuit breakers are in the OFF position.
  2. Connect the battery bank to the inverter. The inverter features automatic lithium battery activation.
  3. Connect the solar panels to the PV input.
  4. Connect the AC utility grid to the AC input.
  5. Connect your loads to the AC output terminals.
  6. Turn on the battery breaker, then the PV breaker, and finally the AC input breaker.
  7. Switch on the inverter's power switch (located on the side, refer to Figure 4.2).
  8. The LCD display will illuminate, and the inverter will begin its startup sequence.

5.2 LCD Display and Button Operation

The comprehensive LCD display provides real-time system status, operational parameters, and error codes. The user-friendly buttons allow for navigation through menus and configuration of settings such as:

  • Battery charging current.
  • AC/solar charger priority.
  • Acceptable input voltage range.
  • On/Off Grid Work Mode selection.

Refer to the detailed user manual for specific menu navigation and parameter adjustment instructions.

5.3 Video Overview

Video 5.1: A brief overview of the TTNergy Hybrid Solar Inverter, showcasing its design and connection points.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter. The TTNergy inverter includes a built-in anti-dust kit, reducing the frequency of internal cleaning in dusty environments.

6.1 Routine Checks

  • Visual Inspection: Periodically check the inverter for any signs of damage, loose connections, or corrosion.
  • Ventilation: Ensure that the ventilation openings are clear of dust and debris to prevent overheating.
  • Connections: Verify that all electrical connections (PV, battery, AC input/output) are tight and secure.
  • Display Monitoring: Regularly check the LCD display for any warning messages or error codes.
  • Environment: Maintain a clean and dry environment around the inverter.

6.2 Cleaning

Before cleaning, ensure the inverter is completely powered off and disconnected from all power sources. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.

7. Troubleshooting

If you encounter issues with your inverter, perform the following basic troubleshooting steps:

  • No Power/Display Off:
    • Check if the main power switch is ON.
    • Verify all AC and DC input breakers are ON.
    • Ensure battery connections are secure and the battery voltage is within the operating range.
  • No Output Power:
    • Check AC output breakers.
    • Verify that the inverter is not in an error state (check LCD display for error codes).
    • Ensure input power (PV or AC utility) is present and stable.
  • Error Codes on Display:
    • Note down the specific error code displayed.
    • Refer to the detailed user manual for a list of error codes and their corresponding troubleshooting steps.
  • Poor Performance:
    • Check solar panel connections and ensure they are clean and free from shading.
    • Verify battery health and charge level.
    • Ensure proper ventilation to prevent thermal derating.

If the problem persists after performing these steps, please contact customer support for further assistance.

8. User Tips

  • Optimal Placement: Install the inverter in a cool, dry, and well-ventilated location to maximize its lifespan and efficiency. Avoid direct sunlight exposure.
  • Regular Monitoring: Utilize the Wi-Fi/Bluetooth connectivity to regularly monitor your system's performance. This helps in early detection of potential issues and optimization of energy production.
  • Battery Management: For systems with batteries, ensure proper battery maintenance and settings are configured to prolong battery life, especially with lithium batteries that benefit from smart charging designs.
  • Firmware Updates: Check with the manufacturer or seller for any available firmware updates to ensure your inverter operates with the latest features and improvements.

9. Warranty and Support

For information regarding the product warranty, please refer to the warranty card included with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

For technical support, troubleshooting assistance beyond the scope of this manual, or spare parts, please contact the seller or authorized service center. Provide your product model and serial number when seeking support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.