Introduction
The Akko Mineral 01 VIA is a versatile mechanical keyboard or barebone kit designed for enthusiasts seeking a customizable and high-performance typing experience. Featuring a compact 75% layout with 81 keys, it offers a balance between space-saving design and full functionality. This manual provides detailed instructions for setting up, operating, and maintaining your Mineral 01 keyboard or kit.

Akko Mineral 01 Mechanical Keyboard and Barebone Kit
Setup Instructions
1. Assembly (Barebone Kit)
The Mineral 01 barebone kit is designed for rapid and tool-free assembly. It features a ball catch mechanism to secure the case, allowing for easy installation and removal of components. The PCB is 5-pin hot-swappable, enabling quick changes of mechanical switches without soldering.
- Installing Switches: Align the pins of your desired 3-pin or 5-pin mechanical switches with the hot-swap sockets on the PCB. Gently press each switch until it clicks into place. Ensure pins are straight to avoid bending.
- Installing Keycaps: Place your chosen keycaps onto the stems of the installed switches. Press firmly until they are securely seated.
- Securing the Case: The case uses a ball catch system. Align the top and bottom parts of the case and press them together until they securely snap into place. Adjustable load force can be modified by tightening screws during installation for enhanced safety and stability.

Diagram illustrating the rapid disassemble mechanism with ball catch.

Close-up of a hot-swappable switch socket on the PCB.
2. Connectivity Modes
The Mineral 01 supports three connectivity modes: Wired (USB Type-C), Bluetooth, and 2.4GHz Wireless.
- Wired Mode: Connect the keyboard to your device using the provided USB Type-C cable. This mode also charges the keyboard's internal battery.
- 2.4GHz Wireless Mode: Plug the 2.4GHz USB receiver into your device. The keyboard will automatically connect.
- Bluetooth Mode: Activate Bluetooth on your device and put the keyboard into Bluetooth pairing mode (refer to operating instructions for specific key combinations). Select "Akko Mineral 01" from your device's Bluetooth list to pair.

Diagram illustrating multi-mode connectivity (wired, 2.4GHz, Bluetooth) across various devices.
3. System Switch
A system switch located on the rear of the keyboard allows you to toggle between operating system modes and power settings:
- Top Position: Mac Wireless Mode (built-in power supply on)
- Middle Position: Default Windows Wired Mode (built-in power supply off)
- Bottom Position: Windows Wireless Mode (built-in power supply on)

Image of the system switch on the keyboard's rear.
Operating Instructions
1. VIA Customization
The Akko Mineral 01 supports VIA software for advanced keyboard customizations. VIA allows you to remap keys, create macros, and configure lighting effects. Download the VIA software from the official Akko website or the VIA project website.
- Key Remapping: Drag and drop keys to assign new functions.
- Macros: Record and assign complex key sequences to a single key.
- Lighting: Customize RGB lighting patterns and colors.

Screenshot of the VIA software interface for keyboard customization.
2. RGB Lighting
The keyboard features built-in and side-LED RGB backlighting with customizable light animation effects. Use the VIA software to personalize your lighting preferences.

Image of the keyboard with vibrant RGB backlighting.

Image showing the keyboard's side-LED RGB lighting.
3. Battery Management
The Mineral 01 is equipped with an 8000mAh battery for extended wireless use. Connect the keyboard via USB Type-C to charge the battery. The keyboard can be used while charging.

Illustration of the 8000mAh battery capacity.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your Akko Mineral 01 keyboard.
- Cleaning Keycaps: Remove keycaps using a keycap puller. Clean them with mild soap and water, then dry thoroughly before reattaching.
- Cleaning the Case: Use a soft, damp cloth to wipe down the aluminum case. Avoid abrasive cleaners or solvents.
- Dust Removal: Use compressed air to remove dust and debris from between keycaps and around switches.
- Switch Maintenance: If using a barebone kit, switches can be easily removed for cleaning or lubrication.
Troubleshooting
- Keyboard Not Responding: Ensure the USB cable is securely connected in wired mode, or that the 2.4GHz receiver is plugged in and the keyboard is in 2.4GHz mode. For Bluetooth, ensure the keyboard is paired and within range. Check the system switch position.
- Keys Not Registering: If individual keys are not working, try reseating the switch in its hot-swap socket. If the issue persists, the switch may be faulty and can be replaced.
- RGB Lighting Issues: Ensure the keyboard is powered on. Use the VIA software to check and adjust lighting settings.
- Wireless Connectivity Drops: Ensure the keyboard is fully charged. Move closer to the 2.4GHz receiver or Bluetooth device to minimize interference.
- VIA Software Not Detecting Keyboard: Ensure the keyboard is connected via USB in wired mode. Restart the VIA software and your computer if necessary.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | AKKO |
| Model | Mineral 01 |
| Keyboard Standard | 82 Key (75% Layout) |
| Operation Style | Mechanical |
| Switches Hot Swap | Yes (3-Pin / 5-Pin Support) |
| Keycup Material | PBT plastic |
| Keycup Printing | Doublshot |
| Interface Type | USB, Bluetooth, Bluetooth / USB |
| Type | 2.4Ghz Wireless |
| Connection | Bluetooth5.0 / 2.4GHz / USB Type-C |
| Backlight Type | MULTICOLOR (South-facing RGB) |
| N-Key Rollover | Support |
| Battery Capacity | 8000mAh |
| Polling Rate | 1000Hz (wired and 2.4G mode), 125Hz (Bluetooth mode) |
| Stabilizer | Pre-assembled Plate-mounted Double-shot Stabilizers |
| Materials | Aluminum Case |
| Structure | Gasket Mount |
| Macro | VIA Support |
| Application | Desktop, Laptop |
| Operating Systems | Windows / macOS / iOS / Android |
| Language | English |
| Package | Yes |
| Wrist Support | No |
| Certification | CE, WEEE |
User Tips
To enhance your experience with the Akko Mineral 01 keyboard:
- Experiment with different switch types to find your preferred typing feel, taking advantage of the hot-swappable sockets.
- Utilize the VIA software to customize key layouts and macros for improved workflow and gaming.
- Keep the firmware updated to ensure optimal performance and access to new features.
Warranty & Support
For warranty information, technical support, or service inquiries, please refer to the official Akko website or contact your authorized retailer. Keep your proof of purchase for warranty claims.