G6 G6

Contents

G6 Wireless Game Controller User Manual

Model: G6

1. Product Overview

The G6 Wireless Game Controller is a multi-platform esports gamepad designed for an immersive gaming experience. It features advanced Hall 3D joysticks and Hall triggers for precise control, six-axis somatosensory manipulation, and asymmetric double vibration motors for realistic feedback. With Bluetooth 5.3 connectivity, it supports a wide range of devices including PC, Nintendo Switch, Android, and iOS.

G6 Multi Platform Esports Gamepad

Figure 1: G6 Multi Platform Esports Gamepad (Black)

1.1 Button Layout

G6 Wireless Controller Button Layout

Figure 2: Schematic Diagram of Functional Buttons

  • Left Side: SELECT, Left joystick/L3 (down pressure), Cross key, LT/LB, M1
  • Center: HOME, TURBO, Mode switch key (V3, M, X, S, 2.4G)
  • Right Side: START, A/B/X/Y buttons, Right joystick/R3 (down pressure), RT/RB, M2

1.2 Key Features

  • Advanced Hall Joysticks: Provides zero-drift, zero dead zone, high smoothness, and high durability for accurate control.
  • High Precision Hall Triggers: Offers precise and responsive input, enhancing the gaming experience.
  • Six-axis Somatosensory Manipulation: Built-in gyroscope for high-precision tactile adjustment and auxiliary fine sighting.
  • Asymmetric Double Vibration Motors: Equipped with symmetrical vibration motors for multiple vibration sensations and adjustable intensity, providing realistic impact and collision feedback.
  • Macro Definition Backkeys (M1, M2): Customizable back keys for personalized gameplay options and combo execution.
  • Intelligent Mode Switch Key: Easily switch between V3, MFi, X-input, Switch, and 2.4G modes.
  • TURBO Function: One-click combo function with adjustable frequency for continuous transmission.
  • Bluetooth 5.3 Connectivity: New industry standard for lower latency and greater stability in wireless connections.
  • Long-lasting Battery: 400mAh battery capacity for extended usage.
  • Anti-slip Texture: Ensures a firm grip during intense gaming sessions.
Double Hall G6 Multi Platform Game Controller

Figure 3: G6 Controller highlighting Hall Trigger, Hall Joystick, Six-axis, and Multi-platform compatibility.

2. Setup and Connection

2.1 Compatibility

The G6 controller is compatible with the following platforms:

  • PC
  • Nintendo Switch
  • Android (6.0 and above)
  • iOS (13.0 and above for MFi games)
  • HarmonyOS
Multi-platform game support for G6 controller

Figure 4: G6 Controller supporting various games across PC, Switch, Android, and iOS.

2.2 Connection Methods

The G6 controller offers multiple connection modes. Use the mode switch key located on the controller to select the desired mode.

G6 Controller Mode Switch Key

Figure 5: Intelligent Mode Switch Key (V3, M, X, S, 2.4G)

2.2.1 X-input Mode

This mode is suitable for streaming on Android/iOS/HarmonyOS/Xbox console series and PC consoles, as well as playing original games on mobile phones.

  1. Pull the controller mode switch to X-input (X).
  2. Long press the HOME button for 3 seconds. The indicator light (cyan) will flash.
  3. On your device (PC, phone, etc.), search for Bluetooth devices and select "Xbox Wireless Controller" to connect.
  4. After successful connection, the indicator light on the handle will remain on (cyan).
  5. To reconnect, simply press the HOME button; the indicator light will flash slowly and automatically reconnect.

2.2.2 2.4G Mode

This mode is suitable for PC and Android devices, requiring a 2.4G receiver (optional, may not be included).

  1. Pull the controller mode switch to 2.4G.
  2. Press and hold the HOME button for 3 seconds. The controller indicator light (cyan) will flash rapidly.
  3. Plug the 2.4G receiver into your device (PC, Android device).
  4. After successful connection, the indicator light on the handle will remain on (cyan).
  5. To reconnect, simply press the HOME button; the indicator light will flash slowly and automatically reconnect.

2.2.3 Switch Mode

This mode is suitable for Nintendo Switch consoles.

  1. On the Nintendo Switch host, navigate to Controller > Change Grip/Order to enter the pairing mode interface.
  2. Pull the controller mode switch to Switch (S).
  3. Press and hold the HOME button for 3 seconds. The indicator light (green) will flash.
  4. After successful connection, the controller indicator light will remain on (green).
  5. To reconnect, simply press the HOME button; the indicator light will flash slowly and automatically reconnect.

2.2.4 MFi Mode

This mode is suitable for playing native Apple/Android/HarmonyOS games, as well as streaming games on PS4/PS5.

  1. Pull the controller mode switch to MFi (M).
  2. Press and hold the HOME button for 3 seconds. The indicator light (purple) will flash.
  3. When your device searches for "DUALSHOCK 4 Wireless Controller", select Connect.
  4. After successful connection, the indicator light on the handle will remain on (purple).
  5. To reconnect, simply press the HOME button; the indicator light will flash slowly and automatically reconnect.

2.2.5 V3 Mode

This mode only supports games that require key mapping on Android and HarmonyOS systems (e.g., King of Glory, PUBG).

  1. Pull the controller mode switch to V3.
  2. Press and hold the HOME button for 3 seconds. The indicator light (red) will flash.
  3. Turn on your phone's Bluetooth, find the Bluetooth name "G6", and select to connect.
  4. After successful connection, the joystick indicator light will remain on (red).
  5. To reconnect, simply press the HOME button; the indicator light will flash slowly and automatically reconnect.

Note for V3 Mode (HID):

  • When the handle is in the V3 position, hold down the X button first, then press HOME to turn on the device. This will activate HID mode. This connection method must be used every time for HID mode.
  • For Android/HarmonyOS key mapping, download and install the "ShootingPlusV3" APP from mobile app markets. Follow the official account "ShootingPlus" for default operating instructions and to set/adjust key positions within the APP.

2.2.6 Wired Mode

The controller supports wired connections for Android HID, Switch, MFi, and Xinput.

  1. Set the mode switch to the desired mode (Android HID, Switch, MFi, or Xinput).
  2. Connect the device and the controller using a cable with data transmission capabilities.

3. Operation

3.1 TURBO Settings

The TURBO function allows for continuous transmission of button presses.

  1. Set Continuous Firing: Press a desired button (e.g., "A") once, then press the TURBO (T) button. The selected button will now continuously fire when held.
  2. Set Automatic Continuous Firing: Press the desired button (e.g., "A") a second time, then press the TURBO (T) button. The selected button will automatically send consecutive messages without needing to be held.
  3. Turn Off Continuous Transmission: Press the desired button (e.g., "A") a third time, then press the TURBO (T) button to restore its original state.

Adjusting TURBO Speed:

  • When a key is in AUTO automatic continuous firing mode, hold down TURBO (T) + Left Joystick (up or down) to cycle through speeds: 15 strokes/second, 25 strokes/second, and 8 strokes/second.
  • This method applies to all function keys.

3.2 Motor Vibration Intensity Adjustment

You can adjust the intensity of the controller's vibration motors.

  • Hold down TURBO (T) + Right Joystick (up or down) to increase or decrease the motor's vibration intensity.

3.3 Axis Calibration Function

To ensure accurate motion sensing, you can calibrate the controller's axis.

  1. Place the controller flat on a stable surface (e.g., desktop).
  2. Simultaneously hold down the START + HOME buttons.
  3. Wait for the indicator light to stay on, then release the buttons.
  4. After calibration is complete, the indicator light will turn off.

3.4 Strong Physical Sensation (Gyroscope)

The controller's six-axis motion sensing function can be configured for different uses.

  1. Simulate Right Joystick: Press and hold the TURBO (T) key for eight seconds. If the motor vibrates, it has switched to simulating the right joystick.
  2. Gyroscope Half-On State: When the six-axis is simulating the right joystick, lightly press TURBO (T) to enter the gyroscope half-on state. This is useful for assisting shooting and aiming (e.g., when pressing L2 to turn on the mirror in FPS games).
  3. Simulate Left Joystick: Press and hold the TURBO (T) key again for eight seconds without releasing it. If the motor vibrates, it has switched to simulating the left joystick.
  4. Cancel Gyroscope Function: Press and hold the TURBO (T) key again for eight seconds without releasing it. If the motor vibrates, the gyroscope function is canceled.

3.5 Macro Programming

The M1 and M2 back keys can be programmed for custom macros.

3.5.1 Setting Back Macro Extension Keys (M1/M2)

  1. Hold down the SELECT button, then press M1 (or M2).
  2. After 1 second, the indicator light will flash rapidly, indicating setting mode.
  3. While the indicator light is flashing, press the desired buttons on the controller in the sequence you want to record. For example, press A, then B, then X, then Y. This sequence will be recorded to M1.
  4. After recording the desired sequence, press M1 (or M2) again to complete the programming. The indicator light will remain on.

3.5.2 Clearing Back Macro Keys (M1/M2)

  1. Simultaneously press and hold the SELECT + M1 (or M2) keys. The controller will enter programming mode, and the indicator light will flash.
  2. Do not press any other keys.
  3. Press M1 (or M2) again to clear the previously set key values for that macro button.

3.6 Controller Charging, Sleep, and Wake-up

3.6.1 Charging Function

  • Low Power: The indicator light flashes to prompt.
  • Charging: The indicator light flashes slowly.
  • Fully Charged: The controller shuts down.

3.6.2 Sleep/Wake-up/Shutdown Function

  • Automatic Sleep: The controller automatically shuts down and enters sleep mode after 5 minutes of no button operation.
  • Wake-up: To reuse the controller, press the HOME key to wake it up and reconnect.
  • Manual Shutdown: In the power-on state, long press the HOME button for 8 seconds to turn off the product. All LED indicator lights will turn off.

4. Specifications

G6 Wireless Controller Product Parameters

Figure 6: Product Parameters

FeatureSpecification
Product NameG6 wireless game controller
Model NumberG6
Applicable PlatformPC, Switch, Android, iOS
Connection MethodBluetooth 5.3 connection
Working VoltageDC3.7V
Working CurrentApproximately 10mA
Continuous Usage Time>20H
Sleep Current<5uA
Charging Voltage/CurrentDC5V/500mA
Bluetooth Transmission Distance<=8M
Battery Capacity400mAh
Standby Time60 days (fully charged storage)
Product Size155mm * 103mm * 62mm
Package Length20 cm
Package Width13 cm
Package Height8 cm
Package Weight0.272 kg
Interface TypeType C
Hall EffectYes
Trigger Button TypeHall-Linear
D-pad Switch TypeMembrane
ABXY Switch TypeMembrane
Bumpers Switch TypeMembrane
Battery IncludedYes
CertificationCE, FCC

5. Maintenance

5.1 General Care

  • Keep the controller away from extreme temperatures, direct sunlight, and high humidity.
  • Avoid dropping or subjecting the controller to strong impacts.
  • Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the controller in a safe place when not in use to prevent damage.

5.2 Battery Information

  • The controller contains a built-in 400mAh rechargeable battery.
  • Charge the controller using a standard USB Type-C cable and a DC5V/500mA power source.
  • Do not attempt to replace the battery yourself. Contact support if battery issues arise.
  • Avoid fully discharging the battery frequently to prolong its lifespan.

6. Troubleshooting

6.1 Connection Issues

  • Controller not connecting to PC/Android: Ensure the controller is in the correct mode (X-input, 2.4G, or V3) for your device. Verify Bluetooth is enabled on your device and try re-pairing. For 2.4G mode, ensure the receiver is properly plugged in.
  • Controller connects but doesn't work: Check if the controller is in the appropriate mode for the game or application you are using. Some games may require specific input modes (e.g., X-input).
  • Some phones may not support this device: Due to system issues or variations in mobile phone hardware/software, some devices may not be fully compatible.

6.2 Game Compatibility

  • Games not working with the controller: Due to uncontrollable factors such as official game platform software upgrades or source code changes, some games may not be able to connect and operate with this product. This is beyond the manufacturer's control.
  • For Android/HarmonyOS games requiring mapping, ensure the "ShootingPlusV3" APP is installed and configured correctly.

6.3 Gyroscope Functionality

  • If the gyroscope is not responding, ensure it is activated correctly as described in Section 3.4. Perform an Axis Calibration (Section 3.3) if motion sensing feels inaccurate.

7. User Tips

  • PC/Android Connectivity: If you experience issues connecting to PC or Android, double-check the selected mode on the controller (X-input or 2.4G for PC, X-input or V3 for Android). Sometimes a simple restart of both the controller and the device can resolve minor glitches.
  • Gyroscope Use: The six-axis gyroscope is a key feature. Experiment with the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.