Ezonetronics RM-LH2523F

Contents

Ezonetronics Wireless CarPlay Android Auto Retrofit Kit

Model: RM-LH2523F

Brand: Ezonetronics

1. Introduction

Preface

Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.

Safety Precautions

  • Install only by qualified professionals to avoid damaging vehicle electrical systems.
  • Disconnect car battery before installation to prevent short circuits.
  • Ensure all connections are secure and insulated to avoid fire hazards.
  • Do not block airbags, driver visibility, or vehicle controls during installation.
  • Avoid modifying essential vehicle safety systems or wiring.
  • Operate connected devices only when parked; never distract from driving.
  • Regularly check for loose connections or overheating during use.
  • Stop using immediately if unusual smells, sounds, or malfunctions occur.
  • Ensure product usage complies with local traffic laws and regulations.
  • Keep product away from water, extreme temperatures, and direct sunlight when not in use.

2. Function Introduction

The Ezonetronics Wireless CarPlay Android Auto Retrofit Kit integrates seamlessly with your vehicle's existing display, offering a range of smart features:

Wireless CarPlay Smart Module features overview
Overview of the Wireless CarPlay Smart Module's key features.

Apple CarPlay

CarPlay lets iPhone users connect to car systems, mirroring key apps. Access navigation, music, calls, and messages via the car's screen or voice commands. It enables hands-free operation, syncing contacts and playlists, enhancing driving safety and convenience seamlessly.

Wireless CarPlay interface displayed on a car screen
Wireless CarPlay interface in operation.

Android Auto

Android Auto connects Android phones to car displays, bringing essential apps safely. Access navigation, music, calls, and messages via voice or touch. It prioritizes driving-focused features, enabling hands-free use to keep focus on the road, enhancing convenience and safety.

Wireless Android Auto interface displayed on a car screen
Wireless Android Auto interface in operation.

Front/Rear/360 Input

The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.

Online navigation map displayed on a car screen
Online navigation functionality.
Intelligent voice control with Siri and Google Assistant
Intelligent Voice Control for hands-free operation.

3. Compatibility

This retrofit kit is compatible with specific Land Rover and Jaguar models equipped with an 8-inch Harman head unit. Please verify your vehicle's compatibility using the table below and by checking your screen style.

Compatible car models and years for Land Rover and Jaguar
Compatible Model List for Land Rover/Jaguar.
Land Rover/Jaguar Compatibility
BrandCar ModelYearScreen Size
Land RoverRange Rover Evoque2016-20188 inch
Discovery 52016-2018
Discovery Sport2016-2018
JaguarXE/XEL2016-2018
XF/XFL/XJL2016-2018
F-TYPE2019
F-PACE2017-2019

Important: This kit is compatible with 8-inch Harman Style screens where the time display is in the middle. It is NOT compatible with Bosch Style screens or 10.25-inch Harman Style screens where the time display is on the right.

Compatibility check for Land Rover/Jaguar screen styles
Visual guide for compatible screen styles.

4. Setup and Installation

Package Contents

Before beginning installation, ensure all components are present:

Package contents and module dimensions
The main module (139mm x 92mm x 20mm) and included cables: Power cable, LVDS OUT, LVDS IN, RCA & USB cable.

Installation Manual (Wiring Overview)

The installation involves connecting the retrofit module to your vehicle's existing head unit and display. This is a plug-and-play, non-destructive installation, but professional installation is highly recommended due to the complexity of vehicle electrical systems.

  • Connect the Factory Power Harness to the module.
  • Connect the Factory LVDS Harness to the module and the car's display.
  • Connect the Original car fiber optic cable to the Head Unit.
  • The module acts as an intermediary between the car's display and head unit, allowing the CarPlay/Android Auto system to integrate.

DIP Settings & Switch

DIP switch settings are crucial for correct operation based on your specific car model and screen size. Adjust the DIP switches on the module according to the table below. After changing DIP settings, a system reboot is required for changes to take effect.

DIP Settings by Car Model
Car ModelYearScreen SizeDIP Switch Setting
Discovery Sport/Evoque2017-20188 inch3, 5 ON
Freellander2016-20188 inch2, 3, 4 ON
Discovery 52017-20188 inch2, 5 ON
XE/XF/XJL2016-20188 inch5 ON
E/F-PACE20178 inch2, 5 ON
F-TYPE20198 inch2, 5, 7 ON

Note: For Range Rover models with different screen configurations, the dial should be set to "ON". If you change DIP settings, reboot the system for the changes to take effect.

5. Operation

Switching Between OEM and CarPlay/Android Auto

To switch between the factory OEM car system and the CarPlay/Android Auto system, long press the "Home" button on the car knob.

Switching between OEM car system and CarPlay/Android Auto
Illustration of switching between OEM and CarPlay/Android Auto interfaces.

Button Control

The system retains original car functions and allows control via steering wheel buttons, central control panel, and touch screen (if applicable).

Retention of original car functions via steering wheel, central panel, and touch screen
Control options using original car functions.

General Button Controls

ButtonOperationFunction
Phone AnswerShort pressAnswer the phone
Phone Hang UpShort pressHang up the phone
Next SongShort pressNext song
Previous SongShort pressPrevious song
Volume +Short pressIncrease the volume
Volume -Short pressDecrease the volume

Button Control (Land Rover Evoque Specific)

ButtonOperationFunction
Up Arrow (Steering Wheel)Long pressSwitch OEM screen to interface screen OR Interface screen to OEM screen
Hazard Lights (Central Console)Double ClickSwitch OEM screen to interface screen OR Interface screen to OEM screen
Touch ScreenTouchControl function

Button Control (Other Cars)

ButtonOperationFunction
Home ButtonLong pressSwitch OEM screen to interface screen OR Interface screen to OEM screen
Map ButtonLong pressSwitch OEM screen to interface screen OR Interface screen to OEM screen
Hazard LightsDouble ClickSwitch OEM screen to interface screen OR Interface screen to OEM screen
Touch ScreenTouchControl function

Wireless Connection

The system utilizes wireless CarPlay and Android Auto, supporting audio and video separation. For optimal connection and audio performance, ensure your vehicle's audio system is set to Bluetooth music mode.

Bluetooth audio output and pairing steps
Bluetooth audio output and pairing process.

5.1 Wireless CarPlay Connection Steps

  1. Turn on your phone's Bluetooth and Wi-Fi, and keep them active.
  2. Go to the Bluetooth settings of the Smart Box.
  3. Select the Bluetooth Device name as "CAR Audio_XXXX".
  4. Pair your phone with the device. A request window will pop up; confirm to use CarPlay.

5.2 Wireless Android Auto Connection Steps

  1. Turn on your phone's Bluetooth and Wi-Fi, and keep them active.
  2. Go to the Bluetooth settings of the Smart Box.
  3. Select the Bluetooth Device name as "CAR Audio_XXXX".
  4. Pair your phone with the device.
  5. After successful Bluetooth pairing, follow the on-screen Android Auto connection process.

External Settings

6.1 Rear View Camera Input

This CarPlay interface supports camera input for clear rearview imagery. Connect the camera according to the guide.

Optional aftermarket rear view camera display
Display with an optional aftermarket rear view camera.

6.2 Radar and Trajectory Settings

To enable reversing rear view functions:

  1. Enter the system settings: "Factory mode" > "Advanced mode".
  2. Enter the password "888888".
  3. Navigate to "MCU setup" and uncheck the "A0" option.
  4. Return to the previous level and click "Restart system" to successfully enable the reversing rear view function.

If your aftermarket camera supports a reversing trajectory line, uncheck the A1 box to display it. The A2 box is for the aftermarket radar option; uncheck it to use.

The front camera input setup follows a similar process.

6. Maintenance

  • Regularly check all connections for security and insulation.
  • Keep the module free from dust and moisture.
  • Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.
  • If any unusual sounds or smells occur, disconnect power immediately and contact support.

7. Troubleshooting (Common Problems)

8.1 Why will the Box's Bluetooth disconnect?

The wireless CarPlay/Android Auto system uses Bluetooth for initial device confirmation, then establishes a Wi-Fi connection for data transmission. To avoid interference, the Bluetooth connection will intentionally disconnect once Wi-Fi is established. This is normal operation.

8.2 I cannot connect CarPlay, but Bluetooth is already paired.

Please forget the device's Bluetooth connection and reset Wi-Fi on your iPhone. (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).

8.3 Why is the wireless CarPlay not stable?

  1. Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
  2. Switch the Wi-Fi channel: Enter the CarPlay box's Factory Mode > Connectivity Settings > Hotspot Band. Select channel 1, 6, or 11, depending on the current region and signal quality.

8. Specifications

FeatureSpecificationFeatureSpecification
Operating Voltage9-16V, 14.4V (rated)Storage Temperature-30~+85°C
Operating Temperature-30~+75°CAmbient Humidity≤98% (at 45°C), 65±5% (rated)
Power Consumption Current1A (rated), 3A (Max)Shutdown CurrentCurrent: 300mA (Clock is on)
Quiescent Currentless than 3mA
Charging Current≤2A; when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid product burning.

9. User Tips

  • Retains Original Car Functions: This kit is designed to work alongside your car's existing system, allowing you to switch between the retrofit interface and the original OEM system seamlessly. All original car functions remain accessible.
  • Screen Compatibility Check: Before purchasing or installing, double-check your car's screen type. Ensure it is an 8-inch Harman Style screen with the time display located in the center, as indicated in the compatibility section.

10. Support

For any technical issues or further assistance, please contact our support team:

You can also refer to the official user manual PDF for additional details: User Manual (PDF)

© Ezonetronics. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.