1. Introduction
Before using your iScooter GX3Pro Electric Scooter, please read this manual carefully and keep it for future reference. This manual provides essential information regarding the assembly, operation, maintenance, and safety of your scooter. Illustrations of the product, accessories, and user interface are for reference purposes only; actual product and functions may vary due to product enhancements.
The iScooter GX3Pro is an 11-inch off-road electric scooter designed for powerful performance and durability. It features a 48V 17.5Ah battery offering a range of 50-60 KM. Powered by a 1500W max. motor with rear-wheel drive, it can reach speeds of up to 50 KM/H when unlocked. The scooter is equipped with dual disc brakes and front and rear shock absorbers for a smooth and safe ride on various terrains. It also includes a magnesium alloy frame and IPX4 waterproofing features.
2. Package Contents
Ensure all items are present and in good condition upon unpacking.
Image: iScooter GX3Pro Electric Scooter and included accessories.
- iScooter GX3Pro Electric Scooter
- Headlight Kit
- Toolkit (various hex wrenches)
- NFC Key Cards (2 pieces)
- User Manual (this document)
- Charger
3. Product Overview
Image: Numbered diagram of the iScooter GX3Pro Electric Scooter components.
- Display
- Control Pad
- Brake Lever
- Throttle
- Handlebar Folding Sleeves
- Fender Hook
- Handlebar Height Adjustment Clamp
- Folding Mechanism
- Headlight
- Disc Brake Rotor
- Atmosphere Light
- Kickstand
- Charging Port
- Fender Latch
- Turn Signals
- 2-in-1 Taillight & Brake Light
4. Assembly
4.1 Unfolding the Scooter
Image: Unfolding and securing the main folding mechanism.
- Lift the handlebar stem until it clicks into place.
- Push the folding mechanism lever down to secure the stem.
- Ensure the folding mechanism is locked securely.
WARNING: Ensure the folding mechanism is locked securely before riding.
4.2 Headlight Installation
Image: Headlight installation process.
- Align the headlight with the mounting holes on the scooter stem.
- Secure the headlight using the provided screws and hex wrench.
WARNING: Before folding or any servicing, turn off the scooter first!
4.3 Handlebar Assembly
Image: Handlebar assembly and locking mechanism.
- Lift both ends of the handlebar to the horizontal positions until they snap onto the threads.
- Turn the folding sleeves as shown in the diagram to lock the two ends of the handlebar securely.
WARNING: Ensure the two ends of the handlebar are locked securely.
4.4 Handlebar Height Adjustment & Control Setup
Image: Handlebar height adjustment and control positioning.
- Open the lever of the height adjustment clamp.
- Adjust the handlebar to your desired height.
- Fully close the lever of the clamp to secure the handlebar.
- Adjust the display, control pad, throttle, and brake levers to your desired angles.
- Tighten their bolts securely using the toolkit.
WARNING: After closing the lever of the handlebar adjustment clamp, ensure the clamp is securely tightened.
5. Folding the Scooter
Image: Folding mechanism steps.
- Ensure the scooter is powered off.
- Release the handlebar folding sleeves and fold the handlebar ends down.
- Release the main folding mechanism lever.
- Fold the handlebar stem down towards the deck until the fender hook engages with the fender latch.
Image: Portable folding function for easy storage.
6. Display Overview
Image: Smart LED Display with indicators for speed, battery, riding mode, and more.
The smart LED display provides real-time information about your scooter's status:
- 1. Turn Signal: Indicates left or right turn signal activation.
- 2. Brake Applied: Lights up when brakes are engaged.
- 3. Scooter Locked: Indicates the scooter is locked (e.g., via NFC or app).
- 4. Headlight On: Indicates the headlight is active.
- 5. App Connected: Shows if the scooter is connected to the mobile app.
- 6. Cruise Control: Indicates if cruise control is active.
- 7. Riding Mode: Displays the current riding mode (ECO, STD, SPORT).
- 8. ODO/TRIP: Alternates between Total Distance (ODO) and Trip Distance (TRIP).
- 9. Battery Level & Voltage: Shows remaining battery charge and voltage.
- 10. Real-time Speed / Error Code: Displays current speed or error codes.
- 11. MAX/AVG: Alternates between Trip Maximum Speed (MAX) and Trip Average Speed (AVG).
Note:
- ODO and Trip will display alternately after the scooter is powered on.
- MAX and AVG will also display alternately.
Riding Modes
Image: Four Cycling Modes and their respective speeds.
| Mode | Original Speed (km/h) | After Cracking the Speed (km/h) | After Cracking the Speed (mph) |
|---|---|---|---|
| Pedestrian | 6 | 20 | 12 |
| ECO | 10 | 30 | 19 |
| STD | 15 | 40 | 25 |
| SPORT | 25 | 50 | 31 |
To unlock the full speed (Cracking Speed): After power on, briefly press the 'M' key five times in a row.
7. Basic Operations
Image: Control pad buttons and their functions.
- Power Button: Hold for 2 seconds to turn the scooter on/off.
- Select Riding Mode: Press to switch between available riding modes (ECO, STD, SPORT).
- M Button: Hold the "M" button for about 3 seconds to enter the settings menu.
- Headlight Switch: When the scooter is powered on, press to turn on/off the headlight, taillight, and atmosphere light.
- Turn Signal Switch:
- Toggle to the left/right to activate the corresponding turn signal.
- Toggle to the middle position to turn off the turn signals.
- Horn Button: Press or hold to sound the horn.
8. Unlocking the Scooter
After powering on, the scooter is locked. There are two methods to unlock it:
8.1 Password Unlock (Default: 000)
- After powering on, the first "0" of the password will flash on the display.
- Press the Power button to enter the second "0".
- Press the Power button again to enter the third "0".
- Quickly double-press the Power button to unlock the scooter.
8.2 NFC Key Card Unlock
Image: Using the NFC key card to unlock the scooter.
Put the NFC key card against the NFC sensing area on the back of the display to unlock the scooter.
WARNING: The scooter will power off if the NFC card is near the NFC sensing area during riding, which is dangerous!
9. Settings
After entering the settings menu (hold 'M' button for 3 seconds), press the 'M' button to cycle through the following setting items:
- P01 (Metric or Imperial Unit): Press the "+" or "-" button to switch between MPH (imperial) and Km/h (metric).
- P05 (Cruise Control): Press the "+" or "-" button to select between 00 (off) and 01 (on). The cruise control icon will flash on the main screen when active.
- P06 (Start Mode): Press the "+" or "-" button to select between 00 (zero start) and 01 (non-zero start).
- P99 (Factory Reset): Press and hold the "+" button for 5 seconds to factory reset the scooter.
- ODO (Odometer Reset): Press and hold the "+" button for 5 seconds to reset the odometer (total distance).
10. Charging
Image: Battery capacity and charging time information.
- The scooter is fully charged when the charger indicator changes from red to green.
- The scooter has charging protection and will automatically stop charging after a full charge. However, it is not recommended to overcharge.
- Keep the charging port cover closed when not charging to protect against dust and moisture.
- The scooter cannot be turned on or operated while charging.
11. Maintenance
11.1 Disc Brake Adjustment
Image: Front and rear disc brakes.
To adjust the brake cable:
- You will need a hex wrench to loosen the bolt on the cable clamp.
- If the disc brake is dragging: Slide the arm of the clamp backward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake clamp.
- If the disc brake does not work efficiently (cable is slack): Slide the arm of the clamp forward along the cable while holding the cable in one hand. Then, retighten the bolt on the brake cable clamp.
Image: Brake cable adjustment diagram.
11.2 Eliminating Brake Noise
Image: Brake caliper adjustment diagram.
- Loosen the two brake caliper mounting bolts (not the bolt on the cable clamp).
- Reposition the brake caliper to ensure the brake rotor is centered between the brake pads.
- Retighten the mounting bolts.
12. Specifications
Image: Scooter dimensions (unfolded and folded).
| Feature | Specification |
|---|---|
| Model | GX3Pro |
| Max. Motor Power | 1500 W |
| Rated Motor Power | 1200 W |
| Range Per Charge | 50-60 km (30-38 miles)* |
| Max Speed | 50 km/h |
| Battery Capacity | 48 V, 17.5 Ah Lithium-ion |
| Charging Time | 7-8 hours |
| Charger Input | AC 100-240 V, 50/60 Hz |
| Charger Output | DC 54.6 V, 2 A |
| Tire Size | 11 inch off-road tubeless |
| Weight | 27.1 kg (59.7 lbs) |
| Max. Load Capacity | 150 kg (330 lbs)* |
| Operating Temperature | -2 to 35 °C |
| Dimensions (unfolded) | 117 x 63.5 x 120 cm (46.06 x 25 x 47.24 in) |
| Dimensions (folded) | 117 x 63.5 x 58 cm (46.06 x 25 x 22.83 in) |
| Braking | Front and rear disc brakes |
| Suspension | Front and Rear Four-Spring Suspension |
| Waterproof Rating | IPX4 |
| Recommended Age | 14+ |
| Certification | CE |
* About the Range: Measured in a laboratory under 100% battery level condition. The range will differ depending on various factors such as load, humidity, wind speed, and operation habits.
* About Max Load Capacity: The structure of this scooter is designed to support a maximum load of 150 kg (330 lbs). For the best riding experience, 70% of the maximum load is recommended.
Image: Recommended rider height, max load capacity, and scooter weight.
13. Safety and Compliance
13.1 Disclaimer
Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
13.2 FCC Statement (FCC ID: 2BBGK-GT2PRO)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition, compliance with exposure requirements.
13.3 CE Warning & Declaration of Conformity
Image: Certificates of Conformity for the iScooter GX3Pro.
This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
For the full text of the EU Declaration of Conformity, visit: https://www.iscooterglobal.de/pages/konformitatserklarung (EU) or https://www.iscooterglobal.co.uk/pages/declaration-of-conformity (UK).
13.4 Disposal of Electrical and Electronic Equipment
The crossed-out garbage can symbol indicates that you are legally obliged to dispose of these devices separately from unsorted municipal waste. Disposal via the residual waste bin or the yellow bin is prohibited. If the products contain batteries or rechargeable batteries that are not permanently installed, they must be removed before disposal and disposed of separately as a battery.
Options for Returning Old Devices (EAR): Owners of old devices can hand them over within the scope of the options for returning or collecting old devices that have been set up and made available by public waste disposal authorities, so that proper disposal of the old devices is ensured.
Data Protection: All end users of waste electrical and electronic equipment are responsible for deleting personal data on the old equipment itself to be disposed of.
14. Troubleshooting
- Scooter not turning on: Ensure the battery is charged. Hold the power button for 2 seconds.
- Speed not reaching maximum: Check if the scooter is in the correct riding mode (SPORT) and if the speed has been 'cracked' (refer to section 6).
- Brake noise: Refer to section 11.2 for instructions on how to eliminate brake noise by adjusting the caliper.
- Scooter feels sluggish on inclines: The scooter has a maximum load capacity of 150 kg. Performance on inclines may be reduced if the rider's weight is close to or exceeds this limit.
- Unlocking issues: Ensure you are using the correct password or placing the NFC key card correctly on the sensing area.
15. User Tips
- Always check for secure packaging upon delivery to ensure no parts are missing or damaged.
- Take time to familiarize yourself with the scooter's robust build and features before your first ride.
- Verify the product against seller photos to ensure you received the correct model and accessories.
- Be mindful of the scooter's size and sturdiness, especially when navigating tight spaces or storing it.
- If you are a heavier rider, be aware that performance on inclines might be affected. The scooter is well-suited for riders up to approximately 70 kg for optimal incline performance.
16. Warranty and Support
For any warranty claims, technical support, or customer service inquiries, please contact the manufacturer or the EC Representative directly.
Manufacturer: Shenzhen Xincheng Times Technology Co.,Ltd
Address: 104-105, Block C, Donghai Wang Building, No. 369 Bulong Road, Ma'antang Community, Bantian Street, Longgang District, Shenzhen
E-mail: support@iscooterglobal.eu
EC Representative: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA
Address: CASTELLANA 9144, 28046 Madrid
E-mail: compliance.gavimosa@outlook.com
Contact: Jorge Wilson
Tel: +34 688185858
iScooter Club App
Image: QR code for iScooter Club App installation.
Scan the QR code to install the "iScooter Club" App. The app provides access to:
- Digital manual
- Step-by-step setup videos
- FAQs & troubleshooting
- Electronic Lock features
For a comprehensive user manual in PDF format, you can also refer to the official document available at this link.