Broadlink HTS2 cable

Contents

Broadlink HTS2 Cable USB Port Temperature Humidity Sensor Detector

Model: HTS2 cable

For use with Broadlink RM4 mini and RM4 Pro Smart Remote

1. Introduction

The Broadlink HTS2 Cable is a USB-powered temperature and humidity sensor designed to extend the functionality of your Broadlink RM4 mini or RM4 Pro smart remote. This accessory allows your smart remote to detect ambient temperature and humidity, enabling advanced automation scenarios within your smart home ecosystem. It is intended for indoor daily use for detection, monitoring, and smart home auxiliary functions.

Broadlink HTS2 Cable in packaging

Image: Broadlink HTS2 Cable in its packaging, labeled as a Sensor Accessory.

2. Safety Information

WARNING – SAFETY INFORMATION

  • This product is an electronic device for indoor use only. It is not a professional safety or lifesaving device. Improper use or failure to follow these instructions may cause fire, electric shock, personal injury, or product damage.

DANGER

  • Risk of electric shock and fire. Do not use this product near water, in humid or wet places.
  • Small parts may exist. Keep away from children under 3 years old and pets to avoid choking or swallowing.

CAUTION

  • Do not disassemble, repair, or modify the product by yourself. Any unauthorized disassembly will void the warranty.
  • Do not place near heat sources, direct sunlight, or unstable surfaces.
  • Use only the recommended power supply or battery type. Do not mix old and new batteries.
  • Dispose of waste batteries according to local environmental regulations.
  • This product is not a toy. Do not let children play with it without adult supervision.

3. Product Specifications

Attribute Value
Model Number HTS2 cable
Wireless Communication Non-Remote Function
Power Source DC
Battery Included No
State of Assembly Ready-to-Go
Control Channels 2 CHANNELS
Origin Mainland China
Certification CE
Operating Temperature -10°C to +55°C
Cable Length (USB-A to sensor) Approx. 73.5 cm
Cable Length (sensor to Micro-USB) Approx. 18.5 cm
HTS2 Cable with dimensions

Image: Broadlink HTS2 Cable showing approximate dimensions of 73.5cm and 18.5cm for its segments.

4. Setup and Installation

  1. Placement: Place or install the HTS2 cable and your Broadlink RM4 mini/Pro on a clean, dry, and flat surface. Ensure the sensor part of the cable is exposed to the environment where temperature and humidity are to be measured.
  2. Connection: Connect the Micro-USB end of the HTS2 cable into the corresponding port on your Broadlink RM4 mini or RM4 Pro smart remote. The USB-A end of the HTS2 cable should be connected to a power source (e.g., a USB wall adapter or a USB port on another device).
  3. Compatibility Note:
    • The HTS2 cable is designed to work with Broadlink RM4 mini and RM4 Pro smart remotes.
    • It is NOT compatible with the RM4C Smart Remote control.
    • For RM4 mini devices manufactured from June 2026 onwards, which feature a Type-C interface, the HTS2 cable (Micro-USB) is not directly compatible. Please check your RM4 mini's interface before purchase. RM4 Pro Smart Remote controls typically use the compatible Micro-USB interface.
  4. Pairing: Follow the instructions provided by the Broadlink APP or your host device to complete the pairing or connection process.
  5. Signal Range: Keep the product within effective working distance of your smart remote and avoid strong signal interference from other electronic devices.
HTS2 cable connected to RM4 mini

Image: The HTS2 cable connected to a Broadlink RM4 mini device, illustrating the proper connection.

HTS2 cable with RM4 mini

Image: The HTS2 cable shown with an RM4 mini, indicating its use as a sensor accessory.

5. Operating Instructions

Once the HTS2 cable is properly connected to your Broadlink RM4 mini or RM4 Pro and configured in the Broadlink APP, it will begin detecting temperature and humidity.

  • Data Display: After adding the device, the temperature and humidity data will be automatically displayed within the Broadlink APP.
  • Automation: Utilize the detected temperature and humidity data to create smart automation routines. For example:
    • If temperature rises, then turn on the air conditioner.
    • If humidity is low, then turn on the humidifier.
  • Environmental Control: Regularly check the indoor temperature and humidity to help you maintain a comfortable and healthy environment by automatically controlling compatible equipment like air conditioners and humidifiers.
HTS2 sensor detecting temperature and humidity

Image: Close-up of the HTS2 sensor part, indicating its function in detecting temperature and humidity.

HTS2 sensor automation logic

Image: Diagram illustrating how the HTS2 sensor works with RM4 Pro/mini to trigger actions based on temperature and humidity changes (e.g., turning on AC or humidifier).

App display of sensor data

Image: Illustration showing that temperature and humidity data are automatically displayed in the app after device setup.

Maintaining a good environment with HTS2

Image: Demonstrates the benefit of using the HTS2 to maintain a good indoor environment for comfort.

6. Maintenance

  • Cleaning: Clean the device with a dry, soft cloth. Do not use liquid or corrosive cleaners.
  • Storage: Store the product in a cool, dry place when not in use for extended periods.
  • Power Status: Regularly check the power status of your Broadlink RM4 device and ensure it is adequately powered for the HTS2 cable to function correctly.

7. Troubleshooting

  • No Temperature/Humidity Readings:
    • Ensure the HTS2 cable is securely connected to the Broadlink RM4 mini/Pro.
    • Verify that the RM4 device is powered on and connected to your network.
    • Check the Broadlink APP for any error messages or connection issues.
    • Confirm compatibility: The HTS2 cable is not compatible with RM4C. For newer RM4 mini models with Type-C ports (from June 2026), a different cable may be required.
  • Inaccurate Readings:
    • Ensure the sensor part of the HTS2 cable is not obstructed or placed too close to heat sources (e.g., direct sunlight, appliances) or moisture sources.
    • Avoid strong electromagnetic environments, which can affect sensor accuracy.
  • Automation Not Triggering:
    • Review your automation rules in the Broadlink APP to ensure they are correctly configured with the HTS2 sensor data.
    • Verify that the target devices (e.g., AC, humidifier) are properly integrated with your Broadlink smart remote and are responsive to commands.

8. User Tips

  • RM4 Mini C Compatibility: Some users have reported that the HTS2 cable's port length might be shorter than expected for the RM4 Mini C, potentially requiring modification for proper fit. Ensure correct voltage is supplied for optimal performance.
  • Alexa Integration: While the HTS2 cable works well for measuring temperature and humidity with Broadlink devices, integrating humidity readings directly with voice assistants like Alexa might require additional configuration or specific skill support.
  • Air Conditioner Control: The HTS2 cable is effective for creating automation to control air conditioners (e.g., Mitsubishi) based on temperature readings, allowing for efficient climate management.

9. Compliance Markings

This product bears the CE Mark in accordance with applicable European regulations.

Applicable Regulations & Harmonized Standards:

  • Radio Equipment Directive 2014/53/EU
  • Electromagnetic Compatibility Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • Harmonized standards: EN 300 220-1, EN 300 220-2, EN 301 489-17, EN 55032, EN 55024, EN 61000-3-2, EN 61000-3-3, EN 62368-1

10. Warranty

This product has a 2-year limited warranty from the date of purchase. The warranty does not cover damage caused by improper use, disassembly, or accidents.

11. Support

For further assistance or technical support, please refer to the official Broadlink website or contact their customer service. You may also find additional resources and FAQs on the product support page.

A user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.