EROMMY Inbox Zero 6-point Massage Office Chair With Footrest, Heated Executive Office Chair With Reclining Backrest

Contents

EROMMY Inbox Zero 6-point Massage Office Chair User Manual

Model: Inbox Zero 6-point Massage Office Chair With Footrest, Heated Executive Office Chair With Reclining Backrest

Introduction

Thank you for choosing the EROMMY Inbox Zero 6-point Massage Office Chair. This height-adjustable executive office chair is designed to provide ultimate comfort and support, featuring 8 vibration modes, 6 lumbar vibration points, and a heating function up to 100°F to help relieve sedentary fatigue. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair.

EROMMY Inbox Zero 6-point Massage Office Chair in Beige
The EROMMY Inbox Zero 6-point Massage Office Chair.

Setup and Assembly

Your EROMMY office chair is designed for straightforward assembly. All necessary hardware and tools are included in the package. Please follow the detailed instructions provided in the assembly guide that accompanies your chair. Assembly typically takes 10-15 minutes.

Key Assembly Points:

  • Ensure all components are present before beginning assembly.
  • Attach the five-star base to the gas lift cylinder.
  • Secure the seat and backrest components according to the diagrams.
  • Install the armrests and footrest mechanism.
  • Verify all screws are tightened securely before use.
EROMMY office chair in an office setting
The assembled chair ready for use in an office environment.

Operating Instructions

Chair Adjustments:

  • Height Adjustment: Use the lever located under the seat on the right side to adjust the seat height. Pull the lever up while seated to lower, or pull up while standing to raise.
  • Reclining Function: The chair offers a tilt range of 90 to 135 degrees. Use the recline lever (typically on the left side under the seat) to adjust the backrest angle.
  • Extendable Footrest: Pull out the footrest from under the seat when you wish to recline and relax. Push it back in when not in use.
  • Adjustable Headrest: The headrest can be rotated up to 65° and its height can be adjusted to provide optimal neck and head support. Refer to the diagram below for adjustment points.
Diagram showing adjustable headrest rotation and height adjustment
Adjusting the headrest for optimal comfort and support.

Massage and Heating Functions:

The chair features a 6-point vibration massage system with 8 modes and an independent heating function. These functions are controlled via a wired remote control.

  • Power On/Off: Use the power button on the remote to turn the massage and heating functions on or off.
  • Massage Modes: Select from 8 vibration modes to customize your massage experience.
  • Massage Strengths: Adjust the intensity of the massage with 3 available strengths.
  • Massage Areas: Target specific areas including neck, back, lumbar, and hip & leg support.
  • Heating Function: Activate the independent heat function to warm up to 100°F, providing soothing relief.
Remote control for massage and heating functions, showing 3 massage strengths, 8 vibration modes, 3 massage areas, independent heat function, and diagrams of massage zones on the chair.
Remote control and massage areas for the vibration and heating functions.

Maintenance

Proper care will extend the life and appearance of your EROMMY office chair.

  • Cleaning: The chair's material is oil and waterproof, making it easy to clean. Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
  • Casters: Periodically check the casters for hair or debris that may hinder smooth movement. Clean as needed.
  • Fasteners: Over time, screws and bolts may loosen. Periodically check and tighten all fasteners to ensure stability and safety.
  • Storage: Store the chair in a dry environment, away from direct sunlight and extreme temperatures.

Troubleshooting

Problem Possible Cause Solution
Chair does not adjust height Gas lift malfunction or lever not engaged Ensure the lever is fully engaged. If problem persists, contact customer support for gas lift replacement.
Chair squeaks Loose fasteners or friction between components Tighten all screws and bolts. Apply a small amount of lubricant to moving parts if necessary.
Massage/Heating not working Power connection issue or remote control malfunction Check if the power adapter is securely plugged in. Ensure the remote control cable is properly connected.
Casters not rolling smoothly Debris caught in casters Remove any hair or debris from the caster wheels.

Specifications

Feature Detail
Adjustable Height Yes
Ergonomics Yes
Cushioned Yes (25D high-density sponge)
Installation Method Assembly
Rotatable Yes
Frame Material Metal
Handrails Yes
Backrest Height <125mm->800mm
Rollers Yes
Material Leather
Style Executive Chair, Swivel Chair
Weight Capacity Up to 400 lbs
Heating Function Up to 100°F
Massage Points 6 lumbar vibration points
Vibration Modes 8
Package Weight 20.4 kg (approx. 45 lbs)
Package Dimensions (L x W x H) 70 x 61 x 36 cm

User Tips

  • For optimal ergonomic support, adjust the chair height so your feet are flat on the floor and your knees are at a 90-degree angle.
  • Utilize the lumbar support and headrest adjustments to maintain a healthy posture during long periods of sitting.
  • Take short breaks and stretch regularly to further reduce sedentary fatigue, even when using the massage and heating functions.
  • Experiment with different massage modes and strengths to find what works best for your comfort.

Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please refer to the documentation included with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

© 2024 EROMMY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.