PowMr POW-LIO48200-16S

Contents

PowMr 51.2V 200AH/10.24KWH LiFePO4 Powerwall Battery Pack Instruction Manual

Model: POW-LIO48200-16S

1. Product Overview

The PowMr POW-LIO48200-16S is a high-performance 51.2V 200AH (10.24KWH) Lithium Iron Phosphate (LiFePO4) Powerwall Battery Pack designed for energy storage applications. This battery pack features a robust Battery Management System (BMS) and supports various communication interfaces for seamless integration into your power system. It is built for high safety, long service life, and efficient energy conversion.

PowMr 51.2V 200AH LiFePO4 Powerwall Battery Pack with key specifications
Figure 1: PowMr 51.2V 200AH LiFePO4 Powerwall Battery Pack highlighting 10.24KWH nominal capacity, 150A max charging/discharging current, and >6000 cycle life.

Key Features:

  • Real-time Monitoring: Equipped with an external LCD screen to display battery data and operating status.
  • High Performance & Safety: Utilizes high-performance LiFePO4 cells for enhanced safety and extended lifespan.
  • Efficient Cooling: Features intelligent air cooling and heat dissipation for improved product reliability.
  • Enhanced Safety: External weak flow switch reduces power consumption and improves safety during transportation and storage.
  • Versatile Communication: Includes RS232, RS485, and CAN communication functions for easy integration with compatible equipment.
  • Remote Control Ready: Supports external wireless module connection for remote data monitoring and control.
  • Flexible Installation: Comes with football pads (for floor standing) and a wall mounting bracket.
  • Comprehensive Protection: Multiple built-in protection functions ensure power supply safety.
  • Stable Output: Provides stable output for various loads within its rated capacity.
  • Scalability: Supports parallel connection of up to 16 independent modules.
  • Durable Design: Internal equipment features all-copper components for low internal resistance, reduced heat generation, and increased safety.

2. Specifications

ParameterValue
ModelPOW-LIO48200-16S
System Voltage51.2V
Capacity200Ah
Rated Energy10.24kWh
Constant Power Charging Voltage58.4V
Max. Discharge Cutoff Voltage43.2V
Recommended Discharge Cutoff Voltage48V
Max. Charging Current150A
Recommended Charging Current40A
Max. Discharging Current150A
Max. Parallel Connection of Battery16 units
Communication InterfaceRS232/RS485/CAN/Dry Contact
Life Cycle≥ 6000 Times @ 80% DOD, 25 ℃
Operating Temperature (Charging)0 °C ~ 60 °C
Operating Temperature (Discharging)-10 °C ~ 65 °C
Rated Operation Altitude<2000m
Rated Operation Humidity<90% RH
IP GradeIP21
Recommended Operating EnvironmentIndoor
Battery Dimensions (LxWxH)700x630x170mm
Net Weight87kg

3. Setup and Installation

The PowMr Powerwall Battery Pack offers flexible installation options, including floor standing using the provided football pads or wall mounting with the included bracket. Ensure the installation location is indoors, within the specified temperature and humidity ranges, and provides adequate ventilation for the intelligent air cooling system.

3.1 System Connection

The battery pack is designed to integrate with various inverters and solar systems. A typical system connection involves connecting the battery to an inverter, which then manages power flow from solar panels, to household loads, and to/from the grid.

System Connection Diagram showing battery, inverter, solar panel, grid, and household loads
Figure 2: General System Connection Diagram for the Powerwall Battery.
Product System Application diagram showing energy flow during Morning, Noon, and Evening scenarios
Figure 3: Illustrative diagram of energy flow in a typical system throughout the day (Morning, Noon, Evening).

3.2 Parallel Connection

For increased capacity and power output, up to 16 PowMr Powerwall Battery Packs can be connected in parallel. Ensure all batteries are of the same model and properly configured for parallel operation according to the inverter's specifications.

Diagram showing up to 16 battery packs connected in parallel to an inverter
Figure 4: Parallel connection setup for multiple battery units with an inverter.

3.3 Communication Interfaces

The battery pack supports RS232, RS485, and CAN communication protocols, as well as dry contact. These interfaces allow the battery to communicate with compatible inverters and monitoring systems. Ensure proper cable connections and configuration for your specific inverter model.

Compatible inverter brands include: PowMr, DEYE, Growatt, SMA, LUX POWER, PYLONTECH, SOFAR, SRNE, GOODWE, Medarevo, MUST, Voltronic Power, Engore.

4. Operation

4.1 Initial Startup

  1. Ensure all physical connections (power and communication) are secure and correct.
  2. Activate the external weak flow switch if present, or follow your inverter's startup procedure.
  3. Monitor the external LCD screen for initial status and any error messages.

4.2 Monitoring

The integrated LCD screen provides real-time data and operating status of the battery. For advanced monitoring and control, an external wireless module can be connected, allowing remote access to battery information.

4.3 Protection Functions

The battery pack incorporates multiple protection functions to safeguard the system against various electrical anomalies. These include overcharge, over-discharge, over-current, over-temperature, and short-circuit protection. In case of a protection event, the battery may temporarily shut down or limit its operation. Refer to the LCD screen or connected monitoring system for diagnostic information.

5. Maintenance

To ensure optimal performance and longevity of your PowMr LiFePO4 Powerwall Battery Pack, follow these maintenance guidelines:

  • Regular Inspection: Periodically check all cable connections for tightness and signs of wear or corrosion.
  • Cleanliness: Keep the battery pack clean and free from dust and debris. Ensure ventilation openings are unobstructed.
  • Environmental Conditions: Operate the battery within the recommended temperature (0 °C to 60 °C for charging, -10 °C to 65 °C for discharging) and humidity (<90% RH) ranges. Avoid direct sunlight or extreme temperatures.
  • Firmware Updates: If available, periodically check for and apply firmware updates for the battery's BMS to ensure optimal performance and compatibility.
  • Storage: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SoC) and stored in a cool, dry place.

6. Troubleshooting

This section provides general guidance for common issues. For complex problems, please contact customer support.

  • Battery Not Charging/Discharging: Check all power connections, ensure the inverter is properly configured, and verify the battery's LCD screen for any error codes.
  • Communication Issues: Verify communication cable connections and ensure the inverter's communication settings match the battery's protocol (RS232/RS485/CAN).
  • Unexpected Shutdown: This could be due to a protection event (e.g., over-discharge, over-temperature). Check the operating environment and battery status on the LCD. Allow the battery to cool down or recharge if necessary.

7. User Tips

  • Inverter Compatibility: When selecting an inverter, ensure it is compatible with 51.2V LiFePO4 batteries and supports the required communication protocols (RS232/RS485/CAN) for optimal performance and monitoring. For 10K three-phase systems or off-grid applications, consult with a qualified installer to choose an inverter that meets your specific power requirements and features (e.g., Wi-Fi monitoring).
  • Parallel Expansion: Plan your energy needs carefully. The ability to parallel up to 16 units allows for significant scalability, but ensure your inverter and wiring can handle the increased capacity.
  • Environmental Control: While the battery has an IP21 rating, maintaining a stable indoor environment within the recommended temperature and humidity ranges will maximize its lifespan and efficiency.

8. Warranty and Support

8.1 Warranty

This PowMr Powerwall Battery Pack comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use conditions.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact your vendor or PowMr customer support. Provide your product model number (POW-LIO48200-16S) and a detailed description of the issue to facilitate prompt service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.