CARABC CX-SMEG-006

Contents

CARABC Wireless CarPlay & Android Auto Module

Model: CX-SMEG-006

Brand: CARABC

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your CARABC Wireless CarPlay & Android Auto Module. This module is designed to upgrade your original car screen with advanced smartphone integration features, including Apple CarPlay and Android Auto, for compatible Peugeot and Citroen vehicles equipped with SMEG or MRN infotainment systems.

The module offers a plug-and-play installation, eliminating the need to modify your vehicle's original wiring harness.

2. Compatibility

This module is specifically designed for Peugeot and Citroen vehicles equipped with SMEG or MRN infotainment systems. It is not compatible with NAC or RNEG systems.

2.1 Compatible Vehicle Models (SMEG Version)

  • Peugeot: 207, 307, 308, 3008, 407, 508, 5008, 807, 4008, 408, 208, 2008, Expert
  • Citroen & DS: C3, C4, C5, C8, Berlingo, DS3, DS4, DS5

2.2 How to Check Your System Version

To confirm compatibility, navigate to the factory settings of your car's radio. Locate the system version information. If your system displays 'SMEG' or 'MRN', the module is compatible. If your system is 'NAC' or 'RNEG', this module is not suitable.

Comparison of SMEG&MRN system screen (compatible) and NAC system screen (incompatible) showing system information.
Figure 2.2.1: Identifying SMEG&MRN vs. NAC Systems

2.3 Smartphone Compatibility

  • Apple CarPlay: iPhone 6 and higher models running iOS 12 or later system versions.
  • Android Auto: Any phone with Android 11.0, Google or Samsung phones with Android 10.0, Samsung Galaxy S8, S8+, or Note 8 with Android 9.0.

3. Features

  • Wireless & Wired CarPlay: Seamless integration for iPhone users.
  • Wireless & Wired Android Auto: Seamless integration for Android smartphone users.
  • MirrorLink Function: Screen mirroring for iPhone (AirPlay) and Android phones (AutoLink).
  • USB Playback: Play media directly from a USB drive.
  • Camera Support: Supports original car camera and reversing radar, as well as aftermarket rear and front cameras.
  • Original Car Control Integration: Utilizes original car buttons (e.g., list, menu, mode buttons) for control.
  • Enhanced Audio Output: Audio can be routed via AUX or the original car's Bluetooth for superior sound quality.
  • Voice Control: Access Siri or Google Assistant for hands-free operation, including navigation, music playback, calls, and messaging.
Product module and car interior displaying CarPlay interface with voice commands.
Figure 3.1: Wireless CarPlay & Android Auto Module in use
Screenshots showing Wireless Apple CarPlay, Wireless Android Auto, and Mirroring functionality with compatible phone models listed.
Figure 3.2: CarPlay, Android Auto, and Mirroring Capabilities

4. Package Contents

Please verify that all items are present in your package:

  • CARABC Wireless CarPlay & Android Auto Module (Main Unit)
  • Power Cable
  • CAN Gateway Cable
  • WIFI Antenna
  • Installation Tools (Free tools)
Image showing the main module unit, power cable, CAN gateway cable, and WiFi antenna.
Figure 4.1: Product Components

5. Setup Instructions

The CARABC module is designed for plug-and-play installation. No modification to the original car harness is required. However, careful attention to connections and dip switch settings is crucial.

5.1 Wiring Diagram

Refer to the detailed wiring diagram below for proper connections. Ensure all connections are secure before powering on the device.

Detailed wiring diagram for Peugeot Citroen MRN Installation, showing connections for LVDS, main unit, power, USB, AUX, cameras, and WiFi antenna.
Figure 5.1.1: Peugeot Citroen MRN Installation Instruction Wiring Diagram
  • LVDS: Connect to the original vehicle LVDS.
  • Main Unit: Connect to the original car's main unit.
  • Power: Connect the original car power terminal male and female.
  • WIFI Antenna: Connect the antenna. Note: The antenna cannot be pasted on metal surfaces.
  • USB Port: For connecting mobile phones, USB flash drives, or software upgrades.
  • AUX Audio Output: Connect for audio output.
  • REAR-CVBS: Connect to the rearview camera or 360-degree panoramic AHD output.
  • FRONT-CVBS: Connect to the front-view camera.
  • Power Supply Wires: Yellow (B+), Red (ACC), Black (GND), Blue (Camera power supply).

Important: When inserting connectors to the host, please ensure they are not stuck or forced.

5.2 Dip Switch Settings

The module features dip switches for specific configurations. Refer to the table below for settings relevant to 13-16 Peugeot/Citroen models.

Diagram showing dip switch positions (ON/OFF) and a table for 13-16 Peugeot/Citroen settings, including options for reverse data and screen size.
Figure 5.2.1: Dip Switch Configuration

CAUTION: Ensure the CarPlay POWER is disconnected when adjusting the dip switches. Once the dip switches are set, then connect CarPlay POWER.

13-16 Peugeot/Citroen SETTING
Dip Switch 1Dip Switch 2Car Model / Function
OFFOFFDefault
OFFONAnother reverse data
Dip Switch 3Dip Switch 4Screen Size
OFFOFF800*480 7"

Note for Manual Transmission with Original Reversing Camera: If your car has a manual transmission and an original reversing camera, you may need to connect it manually. If you are unsure, please contact CARABC support for assistance.

6. Operating Instructions

6.1 Switching Between Systems

To switch between your original car's system and the CarPlay/Android Auto interface, perform a long press on the designated original car button (e.g., List, Menu, or Mode button).

Images showing car steering wheel buttons and console buttons with instructions for long press to switch system, short press to answer/hang up, and long press for voice control.
Figure 6.1.1: Original Vehicle Button Controls
  • ① Long press: To switch between the original car system and the CARABC module system.
  • ② Short press: To answer or hang up a phone call.
  • ② Long press: To activate Voice control (Siri/Google Assistant) without using the original car Bluetooth.
  • ③ Short press: To adjust volume up or down.

6.2 Audio Output

There are two primary methods for audio output from the CARABC module:

  1. AUX Output: Connect the module's AUX output to your car's AUX input. Select AUX as the audio source on your car's infotainment system.
  2. Original Car Bluetooth: For optimal sound quality, you can route audio through your original car's Bluetooth. First, pair your mobile phone's Bluetooth with the CARABC module. Then, connect your mobile phone's Bluetooth to your original car's Bluetooth device. Ensure the original car's Bluetooth switch is turned on.

Note: If you are using AirPlay, MirrorLink, or USB playback, it is recommended to disconnect the original car's Bluetooth and select AUX for audio output.

6.3 Voice Control

Utilize voice commands for hands-free operation of CarPlay or Android Auto. Long press the designated button (as per section 6.1) to activate Siri or Google Assistant. You can then issue commands such as:

  • "Call John."
  • "Go home."
  • "Play music."
  • "Send a message to David."
  • "Navigate to home."
  • "How's the weather today?"
Car interior showing the infotainment screen with voice control prompts like 'Call John', 'Go home', 'Play music', 'Navigate to home', 'How's the weather today?'.
Figure 6.3.1: Voice Control Functionality

7. Maintenance

To ensure the longevity and optimal performance of your CARABC module, follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the module. Avoid using harsh chemicals or abrasive cleaners.
  • Environment: Keep the module in a dry environment and avoid exposure to extreme temperatures, direct sunlight, or excessive moisture.
  • Connections: Periodically check all cable connections to ensure they are secure and free from damage.
  • Software Updates: Check the CARABC official website or contact support for any available software updates to ensure the best performance and compatibility.

8. Troubleshooting

If you encounter issues with your CARABC module, please refer to the following troubleshooting tips:

  • No Display/No Power:
    • Check all power connections (Yellow B+, Red ACC, Black GND) as per the wiring diagram.
    • Ensure the CarPlay POWER was disconnected before adjusting dip switches and reconnected afterward.
    • Verify that the module is receiving power from the car.
  • No Audio:
    • Ensure the correct audio output method is selected (AUX or original car Bluetooth).
    • If using AUX, confirm your car's infotainment system is set to AUX input.
    • If using original car Bluetooth, ensure your phone is paired to both the module and the car's Bluetooth, and the car's Bluetooth is active.
    • If using AirPlay/MirrorLink/USB Play, ensure original car Bluetooth is disconnected and AUX is selected.
  • CarPlay/Android Auto Not Connecting:
    • Ensure your smartphone is compatible (refer to section 2.3).
    • For wireless connection, ensure Bluetooth and Wi-Fi are enabled on your phone.
    • For wired connection, try a different USB cable.
    • Restart your phone and the car's infotainment system.
  • Original Car Controls Not Responding:
    • Ensure the CAN Gateway Cable is correctly connected.
    • Verify that you are performing the correct long/short presses as described in section 6.1.
  • System Incompatibility: If your car's system is NAC or RNEG, this module is not compatible. Please verify your system version as described in section 2.2.
  • Stuck Connectors: If connectors feel stuck during installation, do not force them. Recheck alignment and ensure no pins are bent.

If these steps do not resolve the issue, please contact CARABC customer support.

9. Specifications

AttributeDetail
Brand NameCARABC
ModelCX-SMEG-006
OriginMainland China
CompatibilityPeugeot/Citroen with SMEG & MRN systems
Supported FunctionsWireless/Wired CarPlay, Wireless/Wired Android Auto, MirrorLink (AirPlay/AutoLink), USB Playback, Original/Aftermarket Camera Support, Original Car Control
Package Length25 cm
Package Width20 cm
Package Height7 cm
Package Weight0.786 kg
High-concerned chemicalNone

10. User Tips

  • System Verification: Always double-check your car's infotainment system version (SMEG/MRN) before purchasing and installing to ensure compatibility. Specific versions like SMEG5.41.BR4 cd26413 are known to be compatible.
  • Audio Quality: For the best audio experience, experiment with both AUX and original car Bluetooth audio output methods to determine which provides superior sound in your vehicle.
  • Dip Switch Safety: Remember to disconnect the CarPlay power supply before making any adjustments to the dip switches to prevent potential damage.
  • Citroen C4 Cactus: This module is compatible with the Citroen C4 Cactus if it is equipped with a SMEG system.

11. Warranty and Support

CARABC is committed to providing high-quality products and excellent customer service.

11.1 Warranty

Your CARABC module comes with a one-year guarantee from the date of purchase, covering manufacturing defects and malfunctions under normal use.

11.2 Support Services

  • 24+ Hours After Service: Dedicated support available to assist you with any queries or issues.
  • Exclusive Support Service: Personalized assistance for complex problems.
  • Free Updates: Benefit from free software updates to enhance functionality and compatibility.

11.3 Contact Information

For technical support, warranty claims, or any other inquiries, please contact us:

  • WhatsApp: +86 13794490723
Image detailing after-sales services: 24+ hours after service, one year guarantee, exclusive support service, and free updates.
Figure 11.3.1: CARABC Aftersales Service

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.