1. Introduction
Thank you for choosing the EROMMY Modern 70-inch Entertainment Center with Fireplace TV Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new entertainment center. Please read these instructions carefully before use and retain them for future reference. This entertainment center is designed to accommodate TVs up to 80 inches and features a built-in electric fireplace for added comfort and ambiance.
Figure 1: EROMMY Modern 70-inch Entertainment Center with Fireplace TV Stand
2. Important Safety Information
Please observe the following safety precautions to prevent injury or damage to the product.
- Always place the TV stand on a flat, stable, and level surface.
- Do not exceed the maximum weight capacities for the tabletop and shelves.
- Keep flammable materials away from the electric fireplace.
- Ensure the power cord for the electric fireplace is not pinched or routed under the unit.
- The electric fireplace features an ETL Verified design with flame-retardant nylon and overheat protection. It automatically shuts off if it gets too hot.
- After the heater is turned off, the fan will continue to blow cold air for approximately 30 seconds to prevent overheating. Do not unplug the unit during this cool-down period.
- This fireplace produces no open flames and no smoke, making it safe for use around children and pets.
- Do not block the air vents of the fireplace.
- Only use the provided remote control for operating the fireplace.
Figure 2: Fireplace Safety Features (No Open Flames, No Smoke, Overheat Protection)
3. Package Contents
Your EROMMY Entertainment Center will be delivered in two packages, which may arrive at different times. Please ensure all components are present before beginning assembly.
While a detailed list is provided in the separate assembly instructions, typical contents include:
- Main TV console unit components
- Two side cabinet components
- Electric fireplace insert
- Remote control for fireplace
- Tempered glass shelves
- 16-color LED light strips
- All necessary hardware (screws, dowels, cam locks, etc.)
- Assembly instructions manual
4. Setup and Assembly
Assembly of the EROMMY Entertainment Center is required. Detailed, step-by-step instructions are included in a separate assembly manual provided with your product. Please follow these instructions carefully.
4.1 Before You Begin
- Read all instructions thoroughly before assembly.
- Identify all parts and hardware. Lay them out on a soft, clean surface to prevent scratches.
- Ensure you have the necessary tools (e.g., screwdriver, hammer).
- It is recommended to have two people for assembly.
- The item will be delivered in 2 packages and may arrive at different times.
4.2 Assembly Steps
Refer to the dedicated assembly manual for detailed diagrams and instructions. Key steps generally involve:
- Assembling the main TV console frame.
- Installing the two side cabinet frames.
- Attaching the tempered glass shelves to the side cabinets.
- Inserting the electric fireplace into the central console.
- Installing the 16-color LED light strips (if applicable).
- Securing the back panels, ensuring the cable management hole is accessible.
Figure 3: Product Details (Cable Management Hole, Finish, Base)
5. Operating Instructions (Electric Fireplace)
The electric fireplace is designed for ease of use and provides both heat and visual ambiance.
5.1 Powering On/Off
- Ensure the fireplace is properly plugged into a grounded electrical outlet.
- Use the remote control or the control panel on the fireplace to turn the unit ON or OFF.
5.2 Heat Settings
- The fireplace offers two heat modes: 750W and 1500W.
- Select the desired heat setting using the remote control to adjust the warmth output.
- The heating area can reach up to 400 square feet.
5.3 Flame Effect
- The fireplace features a 3D realistic flame effect.
- There are 4 levels of adjustable brightness for the flame effect.
- The flame effect can be displayed independently, even when the heating function is turned off, to provide ambiance without heat.
5.4 Timer Function
- Utilize the 0-9 hour timer function to automatically shut off the fireplace after a set period, saving energy.
- Adjust the timer using the remote control.
5.5 Overheat Protection
- In case of overheating, the fireplace will automatically shut off.
- After shutdown, the fan will continue to blow cold air for approximately 30 seconds to cool down the internal components. This is normal operation.
Figure 4: Electric Fireplace Insert and Controls
6. Maintenance
Regular maintenance will help keep your entertainment center in excellent condition.
6.1 Cleaning the TV Stand
- Dust regularly with a soft, dry cloth.
- For spills, wipe immediately with a damp cloth and dry thoroughly.
- Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Clean glass shelves with a glass cleaner and a soft cloth.
6.2 Cleaning the Electric Fireplace
- Before cleaning, ensure the fireplace is turned off and unplugged from the power outlet.
- Allow the unit to cool completely.
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not spray water directly onto the fireplace.
- Periodically check the air intake/output vents for dust accumulation and gently clean with a soft brush or vacuum cleaner.
7. Troubleshooting
If you encounter issues with your entertainment center or electric fireplace, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | Not plugged in, power switch off, remote battery dead, overheat protection activated. | Ensure unit is plugged in and power switch is ON. Replace remote batteries. If overheat protection activated, unplug, wait 15 minutes, then plug back in. |
| No heat, but flames are visible. | Heat function is off, or low wattage selected. | Activate the heat function using the remote. Ensure 750W or 1500W mode is selected. |
| Remote control not working. | Dead batteries, obstruction, too far from unit. | Replace batteries. Ensure no obstructions between remote and fireplace sensor. Move closer to the unit. |
| Unit makes unusual noise. | Dust in fan, loose component. | Unplug and clean fan vents. If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact customer support for further assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | WJHM184BK |
| Overall Dimensions (L x W x H) | 70" x 16" x 32" |
| Accommodates TV Size | Up to 80 inches |
| Tabletop Weight Capacity | 300 lbs |
| Shelf Weight Capacity | 50 lbs (each) |
| Fireplace Insert Size | 26 inches |
| Fireplace Heat Settings | 750W / 1500W |
| Fireplace Heating Area | Up to 400 sq ft |
| Flame Brightness Levels | 4 levels |
| Timer Function | 0-9 hours |
| Material | P2-grade frosted thick planed wood, high-quality MDF, tempered glass |
| Color | Black |
| Lighting | 16-color LED light strips |
Figure 5: Product Dimensions and Weight Capacities
9. User Tips
- When assembling, ensure all screws are tightened securely but do not overtighten to avoid damaging the wood.
- Utilize the cable management hole at the back of the central console to keep wires tidy and out of sight.
- Experiment with the 16-color LED light strips to match your room's ambiance or your mood.
- The flame effect can be enjoyed year-round without heat, providing a cozy atmosphere even in warmer months.
- For optimal heating, ensure the fireplace is not obstructed by furniture or curtains.
10. Warranty and Customer Support
For any questions, concerns, or issues regarding your EROMMY Modern 70-inch Entertainment Center with Fireplace TV Stand, please contact our customer support team. Refer to your purchase documentation for specific warranty details and contact information. Our team is dedicated to providing you with a pleasant experience.
