SKMEI 2418 Dual Display Digital Sports Watch User Manual

1. Introduction

Thank you for choosing the SKMEI 2418 Dual Display Digital Sports Watch. This watch combines analog and digital timekeeping with a range of advanced features designed for an active lifestyle. Please read this manual carefully to understand the functions and proper operation of your new watch.

2. Product Overview and Components

The SKMEI 2418 watch features a robust design with multiple components and buttons for various functions.

Button Functions:

• LIGHT Button (Top Left): Activates the LED backlight.
• MODE Button (Bottom Left): Cycles through different modes (Time, Chronograph, Alarm, Countdown Timer, Dual Time).
• START/STOP Button (Top Right): Used to start/stop functions in Chronograph and Countdown modes, and to adjust settings.
• RESET Button (Bottom Right): Used to reset functions in Chronograph and Countdown modes, and to adjust settings.

3. Specifications

4. Initial Setup

Before using your watch, you may need to set the current time and date.

4.1 Setting the Analog Time

1. Pull out the crown (the knob on the right side of the watch case) to the outermost position.
2. Rotate the crown to adjust the analog hands to the desired time.
3. Push the crown back in to start the analog movement.

4.2 Setting the Digital Time and Date

1. In normal timekeeping mode, press the MODE button repeatedly until you reach the Time Setting mode (usually indicated by flashing digits).
2. Press the RESET button to select the item you wish to set (e.g., seconds, hour, minute, month, date, day of week, 12/24 hour format).
3. Use the START/STOP button to increase the selected value. Hold the button to rapidly advance the digits.
4. Once all settings are correct, press the MODE button to exit the setting mode and return to normal timekeeping.

5. Operating Instructions

Your SKMEI 2418 watch offers several functions accessible via the MODE button.

5.1 LED Backlight

Press the LIGHT button (Top Left) to illuminate the digital display for a few seconds. This is useful in low-light conditions.

5.2 Chronograph (Stopwatch)

1. From normal timekeeping mode, press the MODE button until you reach the Chronograph mode (usually indicated by '00:00:00').
2. Press the START/STOP button to start the stopwatch.
3. Press the START/STOP button again to stop the stopwatch.
4. Press the RESET button to clear the stopwatch to zero.
5. To measure split times, press RESET while the stopwatch is running. The display will show the split time, but the stopwatch continues to run in the background. Press RESET again to return to the running stopwatch display.

5.3 Alarm Function

1. From normal timekeeping mode, press the MODE button until you reach the Alarm mode.
2. Press the RESET button to select the hour or minute digits.
3. Use the START/STOP button to adjust the selected digits to your desired alarm time.
4. Press the MODE button to exit the alarm setting.
5. To turn the alarm ON/OFF, in Alarm mode, press the START/STOP button. An alarm icon will appear/disappear to indicate its status.
6. When the alarm sounds, press any button to stop it.

5.4 Countdown Timer

1. From normal timekeeping mode, press the MODE button until you reach the Countdown Timer mode.
2. Press the RESET button to select the hour or minute digits.
3. Use the START/STOP button to adjust the selected digits for your desired countdown duration.
4. Press the MODE button to exit the countdown setting.
5. Press the START/STOP button to begin the countdown.
6. Press the START/STOP button again to pause/resume the countdown.
7. Press the RESET button to reset the countdown timer to its initial set time.

5.5 Dual Time (3 Time)

This feature allows you to keep track of a second or third time zone.

1. From normal timekeeping mode, press the MODE button until you reach the Dual Time mode.
2. Press the RESET button to select the hour or minute digits for the second time zone.
3. Use the START/STOP button to adjust the selected digits.
4. Repeat for the third time zone if available.
5. Press the MODE button to exit the setting mode.

5.6 12/24 Hour Format

In normal timekeeping mode, when setting the time, you can toggle between 12-hour and 24-hour formats using the START/STOP button when the hour digits are selected.

6. Care and Maintenance

6.1 Cleaning

Wipe the watch with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then wipe dry. Avoid harsh chemicals or abrasive materials.

6.2 Water Resistance (50m/5Bar)

Your watch is water-resistant to 50 meters (5 Bar). This means it is suitable for daily use, swimming, washing hands, and getting caught in the rain. However, it is NOT suitable for hot water activities (like hot showers or saunas), diving, or snorkeling. Do NOT operate buttons underwater.

6.3 Battery Replacement

The watch uses a standard watch battery (CR2016/SR626SW). When the display dims or functions become erratic, it's time to replace the battery. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

7. Troubleshooting

8. User Tips

• Read the Manual: Familiarize yourself with all functions before attempting complex operations.
• Button Feel: The buttons may require a firm press due to the watch's robust and water-resistant design.
• Dual Time Zones: Utilize the 3 Time function to easily track different time zones, especially useful for travelers or those communicating internationally.
• Strap Comfort: The silicone band is designed for comfort and durability. Ensure it's not too tight or too loose for optimal wear.

9. Warranty and Support

For any issues not covered in this manual, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase.