Dyness B25100-5

Contents

Dyness 25.6V 100Ah LiFePO4 Battery Module User Manual

Model: B25100-5

Brand: Dyness

1. Product Introduction

This Dyness B25100-5 LiFePO4 Battery Module is a high-performance lithium-ion battery designed for home energy storage systems, solar applications, and various other uses requiring reliable power. It features stable performance, reliable quality, a simple structure, and convenient operation, making it suitable for both household and professional scenarios.

Application

The battery is suitable for daily use, home maintenance, DIY projects, repair work, assembly work, mechanical operation, electronic equipment use, small household appliance applications, and general industrial or daily auxiliary use.

Key Features

  • Stable performance and long service life
  • Simple and convenient to operate
  • Compact structure for easy storage and use
  • Safe and reliable in normal use
  • Wide range of applications

2. Safety Instructions

⚠ WARNING: Keep out of reach of children to prevent accidental injury.

⚠ WARNING: Use only in accordance with its intended purpose.

⚠ WARNING: Ensure safe operating environment before use.

To ensure safe operation and prevent damage, please observe the following:

  • Use the battery only under normal, dry, and safe environmental conditions.
  • Do not use the product beyond its designed function or overload its capacity.
  • Keep hands, hair, and clothing away from moving or working parts during installation or maintenance.
  • Stop using the battery immediately if abnormal noise, damage, or malfunction occurs.
  • Do not use the battery in wet, humid, flammable, or explosive environments.
  • Keep the product away from fire, high temperatures, and sharp objects.
  • Do not disassemble, modify, or forcibly damage the product.
  • Always unplug or disconnect power before cleaning, replacing parts, or performing maintenance.
  • Use appropriate protective equipment (e.g., insulated gloves, safety glasses) if necessary during installation or maintenance.

3. Setup

The Dyness B25100-5 battery module is designed for integration into home energy storage systems. Professional installation is highly recommended.

3.1 Pre-installation Check

  • Inspect the battery module for any signs of physical damage during transit. Do not install if damaged.
  • Ensure all components listed in the packing list are present.
  • Verify that the installation environment is dry, well-ventilated, and within the specified operating temperature range.

3.2 Mounting

The B25100-5 module is typically designed for rack-mount installation. Secure the battery module firmly in a standard equipment rack using appropriate mounting hardware (not included unless specified).

3.3 Wiring Connections

Refer to the front panel of the battery module for connection points:

Front panel of Dyness B25100 Lithium Battery Module

Front panel of Dyness B25100 Lithium Battery Module, showing power terminals, switch, LEDs, and communication ports.

  1. Power Terminals: Connect the positive (+) and negative (-) terminals of the battery to your inverter or system's DC input. Ensure correct polarity and use high-quality, appropriately sized cables to handle the expected current.
  2. Parallel Connection (for expansion): For increased capacity, multiple B25100-5 modules can be connected in parallel, up to a maximum of 16 units for a total of 40kWh. Follow the manufacturer's guidelines for parallel wiring to ensure proper load balancing and system stability.
  3. Communication Ports (CAN/RS485): Connect the CAN or RS485 communication ports to your compatible inverter or system controller. This enables the Battery Management System (BMS) to communicate critical information (e.g., State of Charge, voltage, current, temperature) to the inverter for optimal system performance and protection.
  4. Dry Contact: If your system requires external control or monitoring via dry contact, connect the appropriate cables to the DRY CONTACT terminals.

3.4 Compatible Inverters

The Dyness B25100-5 is compatible with a wide range of inverter brands. Ensure your inverter is listed as compatible or consult with your system integrator.

Compatible Inverter Brands for Dyness Batteries

Examples of compatible inverter brands including SMA, Victron Energy, Schneider Electric, Steca, IMEON ENERGY, DELIOS, STUDER, GOODWE, solis, SAJ, Growatt, Deye, SERMATEC, Voltronic Power, SUNGROW, GMDE, SOFAR SOLAR, Sinexcel.

3.5 Power On

Once all connections are secure and verified, switch the battery module to the 'ON' position using the front panel switch.

4. Operating Instructions

4.1 Powering On/Off

  • To Power On: Ensure all connections are correct, then flip the 'OFF/ON' switch on the front panel to 'ON'. The battery will initiate its startup sequence.
  • To Power Off: Flip the 'OFF/ON' switch to 'OFF'. It is recommended to power down the connected inverter or load first before turning off the battery.

4.2 LED Indicators

The front panel features several LED indicators to provide status information:

  • SW (System Working): Indicates the overall operational status of the battery.
  • SOC (State of Charge): A series of LEDs indicating the approximate charge level of the battery.
  • ALM (Alarm): Illuminates to indicate an alarm or fault condition. Refer to the troubleshooting section or the full manual for details.
  • RUN (Running): Indicates that the battery is actively operating (charging or discharging).

4.3 System Monitoring

For detailed monitoring of battery parameters (voltage, current, temperature, individual cell status, etc.), refer to your connected inverter's display or dedicated monitoring software, which communicates with the battery's BMS via CAN/RS485.

5. Maintenance and Storage

5.1 Maintenance

  • Cleaning: Clean the surface of the battery module with a soft, dry cloth after use. Do not use water or corrosive liquids, as this can damage the unit.
  • Regular Checks: Periodically inspect the battery and its connections for any signs of wear, damage, loose connections, or corrosion to ensure safe and efficient operation.
  • Ventilation: Ensure that the installation area maintains adequate ventilation to prevent overheating.

5.2 Storage

  • Store the battery in a dry, cool, and well-ventilated place, away from direct sunlight, heat sources, and flammable materials.
  • Ensure the battery is stored within its specified temperature range (0-55℃).
  • If storing for extended periods, ensure the battery is at an appropriate State of Charge (typically 50-60%) and perform periodic checks and charges as recommended by the manufacturer to prevent deep discharge.

6. Troubleshooting

This section provides general guidance for common issues. For specific alarm codes and detailed troubleshooting steps, please refer to the comprehensive user manual PDF.

  • Battery Not Powering On:
    - Check if the 'OFF/ON' switch is in the 'ON' position.
    - Verify that all power cables are securely connected and have correct polarity.
    - Ensure the battery is not in a deep discharge state.
  • ALM LED is Lit:
    - An illuminated ALM LED indicates an alarm or fault condition. This could be due to over-voltage, under-voltage, over-current, over-temperature, or other internal issues.
    - Immediately disconnect the load and consult the detailed PDF manual for specific alarm definitions and corrective actions.
  • No Communication with Inverter:
    - Check the CAN/RS485 communication cables for secure connections.
    - Verify that the communication settings on both the battery and the inverter are correctly configured.
  • Reduced Performance:
    - Ensure the battery is operating within its specified temperature range.
    - Check for any obstructions to ventilation.
    - Avoid consistently operating the battery at its maximum discharge rate for prolonged periods.

If you encounter persistent issues or complex problems, please contact Dyness customer support or a qualified technician.

7. Specifications

AttributeValue
Model NumberB25100-5
Product Name25.6V 100Ah LiFePO4 Battery
Nominal Voltage25.6 Volts
Capacity100Ah (Also available in 200Ah, 300Ah, 400Ah variants)
Total Stored Energy2.56 kWh
Max. Discharge Power2.56 kW
Weight22 kg
Cycle Life6000 Cycles
Discharge Rate0.5C
Charging Ratio0.5C
Discharge Rate (Efficiency)85%
ExpansionUp to 16 units in parallel (Max 40kWh)
Anode MaterialLFP (Lithium Iron Phosphate)
Storage Temperature0-55℃
ApplicationHome Appliances, Solar Energy Storage Systems
CertificationCE, UN38.3, IEC 62040-1, IEC 62109-1, IEC 62109-2, IEC 62619, IEC 62133, CEC, UL, MSDS, ISO 9001
OriginMainland China

8. User Tips

  • Understand Warranty Terms: The limited warranty is valid for a period of 7 or 10 years after delivery, restricted by specific terms and conditions. Ensure you understand these terms.
  • System Expansion: For increased energy storage capacity, consider expanding your system with up to 16 parallel units, achieving a maximum of 40kWh.
  • Refer to PDF Manual: For detailed installation diagrams, advanced troubleshooting, and comprehensive technical specifications, please refer to the official user manual PDF available at: Dyness B25100-5 User Manual (PDF).

9. Warranty and Support

9.1 Warranty Information

The Dyness B25100-5 LiFePO4 battery module comes with a limited warranty of 7 to 10 years after delivery. Please note that the warranty is restricted by specific terms and conditions, which can be found in the full user manual PDF.

9.2 Customer Support

If you have any questions regarding usage, quality, or require after-sales service, please feel free to contact us:

  • Email: 17670348923@163.com
  • WhatsApp: +86 133 6731 6052

We aim to reply to all inquiries within 24 hours.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.