VLAND Full LED Headlights for VW Polo Vento Mk5 (2011-2017)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your VLAND Full LED Headlights. These headlights are designed as a direct replacement for VW Polo Vento Mk5 models manufactured between 2011 and 2017, featuring a full LED design with moving sequential turn signals and Daytime Running Lights (DRL) with demon eyes.

For optimal performance and safety, please read this manual thoroughly before installation and use. Professional installation is recommended.

2. Key Features

• Full LED Design: Enhanced illumination and modern aesthetic.
• Moving Sequential Turn Signals: Dynamic amber LED indicators for improved visibility.
• Daytime Running Lights (DRL) with Demon Eyes: Distinctive lighting signature for increased road safety.
• Perfect Beam Pattern: Engineered for optimal light distribution.
• Plug and Play Installation: Designed for convenient installation with original connections and wiring.
• Durable Construction: Made from Plastic+ABS+Aluminum with a 100% waterproof rating for long-lasting performance.
• Long Lifespan: Engineered for over 100,000 hours of operation.

Figure 2.1: Front Details of the Headlight (LED DRL, Sequential Turn Signal, Dual Beam Lens with Demon Eyes)

Figure 2.2: Headlight with Demon Eyes Illuminated

3. Specifications

4. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• 1 Pair of VLAND Full LED Headlights (Left and Right)
• Necessary Wiring Harnesses (integrated for plug and play)
• Halogen bulbs for high beam (low beam bulbs are not included, allowing for customization)
• Protective foam packaging

Figure 4.1: Product Packaging and Contents

5. Installation Instructions

These VLAND LED Headlights are designed for a "plug and play" installation, meaning they utilize the same connections and wiring as your original headlights. However, professional installation is highly recommended to ensure proper fitment, alignment, and electrical connections.

5.1 Pre-Installation Checklist

• Ensure your vehicle is turned off and the battery is disconnected.
• Gather necessary tools (e.g., screwdrivers, wrenches, trim removal tools).
• Inspect the new headlights for any damage before starting installation.

5.2 General Installation Steps (Consult a professional for specific vehicle procedures)

1. Remove Bumper/Grille (if necessary): Depending on your vehicle model, you may need to partially or fully remove the front bumper or grille to access the headlight mounting bolts.
2. Disconnect Old Headlights: Unplug the wiring harness from the back of your original headlights.
3. Remove Old Headlights: Unscrew any mounting bolts or clips securing the old headlights and carefully remove them from the vehicle.
4. Prepare New Headlights: If you are using custom low beam bulbs (not included), install them into the new VLAND headlights now.
5. Connect New Headlights: Connect the wiring harness from your vehicle to the corresponding sockets on the VLAND headlights. Ensure a secure connection.
   

   Figure 5.1: Back Details of the Headlight (Connection Points)

   • H/L UP&DOWN ADJUSTING SCREW: For vertical beam adjustment.
   • H/L LEFT&RIGHT ADJUSTING SCREW: For horizontal beam adjustment.
   • TURN SIGNAL SOCKET: Connects to the vehicle's turn signal wiring.
   • RUNNING LIGHT SOCKET: Connects to the vehicle's running light wiring.
   • CONNECT WITH THE HARNESS ASSEMBLY: Main power and signal connection.
   • TRANSFER WIRE FITS 2012-2014: Specific wire for certain model years (2012-2014) for compatibility.
6. Mount New Headlights: Carefully position the new VLAND headlights into place and secure them with the mounting bolts/clips.
7. Test Functionality: Reconnect the battery. Turn on your vehicle and test all headlight functions: low beam, high beam, DRL, and turn signals.
8. Adjust Beam Alignment: Adjust the headlight beam using the H/L UP&DOWN and H/L LEFT&RIGHT adjusting screws to ensure proper alignment and avoid blinding oncoming traffic.
9. Reassemble: Reinstall the bumper/grille if it was removed.

Note: The "TRANSFER WIRE FITS 2012-2014" is a specific component for certain model years to ensure proper electrical compatibility. Ensure it is correctly connected if your vehicle falls within this range.

6. Operation

Your VLAND LED Headlights integrate several lighting functions that operate via your vehicle's standard lighting controls.

• Daytime Running Lights (DRL): The DRLs, including the distinctive "demon eyes," will typically activate automatically when the vehicle is started and the headlights are off or in auto mode (depending on vehicle settings). They provide enhanced visibility during daylight hours.
• Low Beam: Activate your low beam headlights using your vehicle's standard headlight switch. These provide primary illumination for night driving.
• High Beam: Engage your high beam headlights using your vehicle's standard high beam control. These provide maximum illumination for clear, dark roads.
• Sequential Turn Signals: When you activate your vehicle's turn signal, the amber LEDs within the headlight will illuminate in a dynamic, sequential pattern, clearly indicating your turning intention.

Figure 6.1: Headlights with DRL and Sequential Turn Signal Active

7. Maintenance

Proper maintenance will ensure the longevity and optimal performance of your VLAND LED Headlights.

• Cleaning: Regularly clean the headlight lenses with a soft cloth and mild automotive soap or glass cleaner. Avoid abrasive materials or harsh chemicals that could scratch or damage the lens.
• Inspection: Periodically inspect the headlights for any signs of damage, cracks, or moisture intrusion. Check wiring connections for looseness or corrosion.
• Bulb Replacement (Low Beam): If you have installed aftermarket low beam bulbs, refer to their specific instructions for replacement. The integrated LEDs for DRL, high beam, and turn signals are designed for long life and are generally not user-replaceable.
• Professional Check-ups: Consider having your headlights professionally inspected during routine vehicle maintenance to ensure proper function and alignment.

8. Troubleshooting

This section addresses common issues you might encounter with your VLAND LED Headlights.

Issue: Headlights are not turning on or specific functions are not working.

Possible Solutions:

• Check all wiring connections at the back of the headlight and to the vehicle's harness. Ensure they are secure and free from corrosion.
• Verify that the vehicle's fuses related to lighting are intact and not blown.
• If only the low beam is not working, check the aftermarket bulb (if installed) or its connection.
• Ensure the transfer wire (if applicable for 2012-2014 models) is correctly installed.

Issue: Headlight beam appears misaligned or is blinding other drivers.

Possible Solutions:

• Use the H/L UP&DOWN and H/L LEFT&RIGHT adjusting screws on the back of the headlight to fine-tune the beam alignment. This should be done on a level surface against a wall at a specified distance (refer to local regulations for headlight aiming).
• If you are unsure, seek professional assistance for headlight alignment.

Issue: Moisture or condensation inside the headlight lens.

Possible Solutions:

• Minor condensation can occur due to temperature changes and usually dissipates. Ensure all caps and seals on the back of the headlight are properly seated.
• If excessive moisture persists, it may indicate a seal issue. Contact support for assistance.

9. User Tips

• While these headlights are designed for "plug and play" installation, if you are not experienced with automotive electrical systems or headlight replacement, consider professional installation to avoid potential issues.
• The low beam bulbs are not included, allowing you to choose between halogen or HID Xenon bulbs based on your preference. Ensure any aftermarket bulbs are compatible with the headlight housing and vehicle's electrical system.
• Always test all lighting functions (DRL, low beam, high beam, turn signals) before fully reassembling your vehicle's front end after installation.

10. Warranty and Support

Your VLAND LED Headlights come with a 12-month warranty from the date of purchase, covering manufacturing defects. This warranty does not cover damage due to improper installation, misuse, accidents, or normal wear and tear.

For technical support, warranty claims, or any questions regarding your product, please contact VLAND customer service:

• Email: 769677926@qq.com
• Phone/WeChat/WhatsApp: +86 13872412124

Please have your purchase details and model number (YAA-PL-0291) ready when contacting support.

11. Certifications

These VLAND LED Headlights are manufactured to meet high-quality standards and hold the following certifications:

• ISO9001
• CCC

Figure 11.1: Product Certifications