1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ilebygo Projector Remote Control. This remote is designed as a replacement for specific mini projector models, including HY300, HY320, HY300PRO, and HY320Mini. Please read this manual carefully before use to ensure optimal performance and longevity of your device.
2. Safety Information
- Keep the remote control away from water and excessive moisture.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Do not attempt to disassemble or modify the remote control.
- Dispose of used batteries according to local regulations.
- Keep batteries out of reach of children.
3. Package Contents
Upon opening your package, you should find the following item:
- 1 x Projector Remote Control (Batteries are NOT included)
You will need to provide 2x AAA batteries for operation.
4. Product Overview
4.1 Remote Control Layout
Familiarize yourself with the buttons and their functions as shown in the diagram below:
- ON/OFF: Power button to turn the projector on or off.
- MUTE: Mute/unmute audio.
- Miracast: Activates screen mirroring function.
- Switch to mouse control: Toggles between standard navigation and mouse pointer mode.
- Airpin: Activates Airplay function.
- DIRECTIONS (Up, Down, Left, Right): Navigation arrows for menu selection.
- OK: Confirms selection or action.
- RETURN: Goes back to the previous screen or menu.
- MENU: Opens the projector's main menu.
- HOME: Returns to the home screen.
- VOL+/-: Adjusts the volume level.
5. Setup
5.1 Battery Installation
- Open the battery compartment cover on the back of the remote control.
- Insert two (2) AAA batteries, ensuring correct polarity (+ and -).
- Close the battery compartment cover securely.
5.2 Compatibility
This remote control is specifically designed for HY300, HY320, HY300PRO, and HY320Mini projectors. It uses IR (Infrared) wireless communication. Please note that this remote is not a universal projector remote and may not be compatible with other brands or models of mini projectors.
6. Operating Instructions
Ensure the remote control is pointed directly at the projector's IR receiver for optimal performance.
- Power On/Off: Press the ON/OFF button once to power on or off your projector.
- Navigation: Use the DIRECTIONS arrows (Up, Down, Left, Right) to navigate through menus and options.
- Selection: Press the OK button to confirm a selection.
- Volume Control: Use the VOL+/- buttons to increase or decrease the audio volume.
- Mute: Press the MUTE button to silence the audio.
- Home Screen: Press the HOME button to return to the main interface of the projector.
- Menu Access: Press the MENU button to access additional settings or options.
- Return: Press the RETURN button to go back to the previous screen.
- Miracast/Airpin: Use the dedicated Miracast or Airpin buttons to activate screen mirroring or Airplay functionalities, respectively. Follow the on-screen instructions on your projector for pairing.
- Mouse Control: Press the Switch to mouse control button to toggle a mouse pointer on the screen, allowing for more precise navigation in certain applications.
7. Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage. Store in a cool, dry place.
8. Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly and are not depleted. Replace if necessary.
- Ensure there is a clear line of sight between the remote control and the projector's IR receiver.
- Make sure the remote is within the effective operating range of the projector.
- Specific functions (Miracast/Airpin) not working:
- Ensure your projector's software is up to date.
- Check the projector's settings to ensure these features are enabled.
- Refer to your projector's specific manual for detailed instructions on these advanced features.
If you encounter any product problems that cannot be resolved with the above steps, please contact us for assistance.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | ilebygo |
| Wireless Communication | IR (Infrared) |
| Use | Projectors (HY300, HY320, HY300PRO, HY320Mini) |
| Origin | Mainland China |
| Dimensions (L x W x H) | Approx. 13.8 cm x 3.8 cm x 1.5 cm (5.43 in x 1.5 in x 0.59 in) |
| Package Weight | 0.04 kg |
| Package Dimensions | 16 cm x 4 cm x 2 cm |
| Batteries Required | 2x AAA (not included) |
10. User Tips
- Check Compatibility: Always verify that your projector model (e.g., HY300, HY320, HY300PRO, HY320Mini) is listed as compatible before attempting to use this remote. It is not a universal remote for all projector brands.
- Battery Life: For optimal performance, use high-quality AAA alkaline batteries. If the remote feels unresponsive, fresh batteries are usually the first solution.
- Line of Sight: Ensure no obstructions are between the remote and the projector's IR receiver for reliable command transmission.
11. Warranty and Support
For any product-related issues, technical support, or warranty inquiries, please contact the seller directly. You may also find additional item guides and documents, including a user manual in PDF format, at the following link: User Manual (PDF).
Your satisfaction is important to us. Please reach out if you experience any problems with your product.
