LEHX Wireless Carplay Android Auto 5.5 Inch HD IPS Screen Car Radio

Contents

LEHX 1din Car Stereo User Manual

Model: Wireless Carplay Android Auto 5.5 Inch HD IPS Screen Car Radio

LEHX 1din Car Stereo with 5.5 Inch QLED Screen, Wireless Carplay, Android Auto, and included camera

LEHX 1din Car Stereo with 5.5 Inch QLED Screen, Wireless Carplay, Android Auto, and included camera.

Introduction

Thank you for purchasing the LEHX 1din Car Stereo. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure you get the best experience from your device. Please read this manual thoroughly before installation and use.

Safety Information

  • Do not install the product directly into the car immediately after receiving it. Due to long transit, the product may be affected. Please test the unit before installation.
  • Ensure all wiring connections are correct to prevent damage to the unit or vehicle.
  • Do not ground speaker cables. Do not share speaker cables or allow them to touch other lines, as this can cause sound distortion or unit damage.
  • If the unit emits smoke, immediately replace the FUSE. If the problem persists, the internal circuit may be burned, and professional service is required.

Package Contents

The package typically includes:

  • LEHX 1din Car Stereo Unit (5.5 inch)
  • Remote Control
  • Operation Manual (this document)
  • Power Cable Harnesses
  • Rear Camera (if included in your specific model)
  • USB Cables
  • GPS Antenna
LEHX 1din Car Stereo and included accessories: remote, manual, wiring harnesses

LEHX 1din Car Stereo and included accessories: remote, manual, wiring harnesses.

Specifications

General Specifications
FeatureSpecification
BrandLEHX
Din SizeOne Din
Operating SystemAndroid
Display Size5.5" (also 9/10inch options)
ResolutionQLED 1280*480 (4G version: QLED 1280*720)
RAM6G (Optional: 2G+32G / 1G+16G)
ROM128G
CPUMTK 8227 - 4core
Out Power50*4
Voltage12 V
Item Weight0.5kg
Item Size110*110*210mm
MaterialABS+
CertificationCE
Special FeaturesWifi function, Support 4G Network, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatCD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageMulti-language support (e.g., English, Russian, Spanish, French, German, Italian, etc.)
AV-OUTWiFi version support, 4G version not support
Mirror LinkiPhone & Android
MicrophoneBuilt-in
GPS Navigation MapBuilt-in offline map free update (support Navitel/Igo)
Bluetooth Phone BookSupport
Bluetooth MusicSupport
Package Dimensions
DimensionValue
Length21 cm
Width11 cm
Height11 cm
Weight0.5 kg
Product dimensions showing 110mm height, 210mm width, and 110mm depth

Product dimensions showing 110mm height, 210mm width, and 110mm depth.

Icons representing various features: Apple CarPlay, Android Auto, Airplay, AutoLink, Bluetooth, USB/SD Music, USB/SD Video, AHD Camera, Navigation Map Online, Siri Assistant, DVR, IPS 1024x600 Resolution

Icons representing various features: Apple CarPlay, Android Auto, Airplay, AutoLink, Bluetooth, USB/SD Music, USB/SD Video, AHD Camera, Navigation Map Online, Siri Assistant, DVR, IPS 1024x600 Resolution.

Installation

Pre-Installation Check

Before installing the unit in your car, it is highly recommended to test the machine. Connect the yellow (B+) and red (ACC) wires to a 12V positive power source, and the black (GND) wire to a negative pole. Press the power button to ensure the unit turns on normally.

Rear Interface Description and Wiring

Familiarize yourself with the rear interface and its connections:

Rear interface diagram showing video input, video output, audio output, reverse input, radio antenna, and power/speaker cable interface

Rear interface diagram showing video input, video output, audio output, reverse input, radio antenna, and power/speaker cable interface.

Detailed wiring diagram for car stereo power, speakers, ACC, ground, reverse, steering wheel control, and auto antenna

Detailed wiring diagram for car stereo power, speakers, ACC, ground, reverse, steering wheel control, and auto antenna.

  • Power Plug:
    • Yellow (BATTERY): Constant Power Supply +12V. Keeps power on for memory function.
    • Red (ACC): Ignition Switch. Connect to a switched 12V source.
    • Black (GND): Ground Wire.
    • Orange (ILLUMINATION): Connect to illuminate backlight.
    • Pink (REVERSE): Reversing camera control line.
    • Brown (KEY2) & Orange/black striped (KEY1): Steering Wheel Control.
    • Blue (ANT): Auto Antenna Power.
    • Speaker Wires (White, Gray, Green, Purple, and their black striped counterparts): Connect to corresponding car speakers. Ensure speaker cables are not grounded, shared, or touching other lines to prevent sound distortion or unit damage.
  • Other Connections:
    • F-CAM (VIDEO-IN-2): Video Input 2 (Front Camera Input)
    • AUX R IN / AUX L IN: Right/Left Audio Input
    • VIDEO-IN-1: Video Input 1
    • VIDEO OUT: Video Output
    • FR OUT / FL OUT: Front Right/Left Audio Output
    • SUB WOOF: Subwoofer Output
    • MIC: Microphone Input
    • AMP CONT: Amplifier Control
    • BT Antenna
    • WiFi Antenna
    • R-CAM: Reversing Camera Input
    • USB1/2: USB Port
    • Protocol Box: Use only when needed.

CANBUS Connection

The CANBUS connection method varies depending on your car model:

CANBUS connection diagram for high-end and low-end car models

CANBUS connection diagram for high-end and low-end car models.

  • For High-End Model Car: Disconnect the CANBUS box and then connect the CANBUS wires.
  • For Low-End Model Car: Connect the CANBUS box and then disconnect the CANBUS wires.
  • Attention: If the CANBUS box and black buckle are connected simultaneously, it may cause the radio to fail to shut down after the car is turned off.

Reversing Camera Installation

The reversing camera automatically switches to the reverse image when in reverse gear.

Reversing video display on car stereo screen with a rear camera view

Reversing video display on car stereo screen with a rear camera view.

Connection Method:

  1. Locate the reverse control line (pink wire) on the unit's power line. Connect this line to a +12V positive pole. The screen will turn blue.
  2. Locate the CAM video input interface on the back of the unit. Find the positive and negative wires of the backup light.
  3. The camera has two sockets:
    • The red socket connects to the power cable.
    • The yellow socket inserts into the video cable.
    • The red wire of the power cable and the wire of the video cable are screwed together on the positive pole of the reverse lamp.
    • The black wire of the power cable is not used.
    • The other end of the video cable connects to the CAM video input interface on the back of the unit.
    • The red line coming out of the video line connects to the reverse control line of the power line.
  4. If the camera is broken (lamp not lit when properly wired), it needs to be replaced.
Detailed reversing camera wiring diagram showing trigger lines and AV display interface connection

Detailed reversing camera wiring diagram showing trigger lines and AV display interface connection.

Reversing camera wiring diagram showing connections to monitor, reversing light power, and camera

Reversing camera wiring diagram showing connections to monitor, reversing light power, and camera.

Important: If the reversing camera is not installed, do not connect the REVERSE/BACK cable to any place. Leave the cable unconnected. Otherwise, the unit may not display properly or automatically enter reverse mode, which can cause malfunction. Disconnect the REVERSE/BACK line as soon as possible if this occurs.

Operation

User Interface Display

The unit features a user-friendly interface with various screens for different functions, including radio, media playback, settings, EQ, phone, CarPlay, and Android Auto.

User interface display showing various screens for radio, media, settings, EQ, phone, CarPlay, and Android Auto

User interface display showing various screens for radio, media, settings, EQ, phone, CarPlay, and Android Auto.

Apple CarPlay (Supported on some models)

Car Multimedia Player comes with car-play function, no need to purchase additional accessories.

Built-in Carplay Android AUTO feature, showing wireless and wired connection icons

Built-in Carplay Android AUTO feature, showing wireless and wired connection icons.

  • Wired Connection: Connect the USB data cable to automatically enter the CarPlay interface.
  • Wireless Connection:
    1. Turn on Bluetooth and Wi-Fi functions on your mobile phone.
    2. Connect to Bluetooth. The unit will automatically enter the CarPlay interface.

    Note: The signal is transmitted via Wi-Fi. CarPlay will function normally even if Bluetooth is off. If Wi-Fi is turned off, CarPlay will disconnect.

Android Auto (Supported on some models)

This feature may not be supported in all countries, and Google Play services must be available locally.

  • Download and install "Android Auto" software from Google Play.
  • Use a mobile phone with Android 6.0 or higher and a valid data cable connection.
  • Wired Connection: Connect the USB data cable to automatically enter the Android Auto interface.
  • Wireless Connection:
    1. Turn on Bluetooth and Wi-Fi functions on your mobile phone.
    2. Connect to Bluetooth. The unit will automatically enter the Android Auto interface.

    Note: The signal is transmitted via Wi-Fi. Android Auto will function normally even if Bluetooth is off. If Wi-Fi is turned off, Android Auto will disconnect.

Learning Steering Wheel Controls

The unit supports steering wheel controls, often via an infrared remote control.

Infrared remote control attached to a steering wheel with buttons for call, track, and volume control

Infrared remote control attached to a steering wheel with buttons for call, track, and volume control.

To program steering wheel controls:

  1. Press and hold a button on your car's original steering wheel.
  2. Find the corresponding button icon on the unit's display.
  3. Click the icon to change its color, indicating successful learning.

Troubleshooting

This section addresses common problems and provides solutions.

1. Cannot Boot Normally

  • Wiring Check: Ensure the yellow (B+), red (ACC), and black (GND) wires are correctly connected. Yellow to positive, red to key control (switched 12V), black to negative. Incorrect or incomplete connections will prevent booting.
  • Fuse Check: If the 3 wires are connected correctly but it doesn't boot, check if the fuse on the yellow line is broken. If the fuse is fine, twist the yellow and red wires together, turn on the key, and press the unit's power button.
  • Short Circuit: If the fuse burns repeatedly, there might be a short circuit in the unit's protection circuit. Professional guidance is needed for repair.
  • Car Wiring Issue: If the unit boots when directly connected to a 12V battery (yellow and red twisted to positive, black to negative), but not in the car, the original car wiring is incorrect or problematic.

2. Automatic Shut-down

  • Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, automatic shutdown will occur. Follow correct wiring.
  • Unstable Voltage: Test with a stable 12V-5A power supply. If it still shuts down automatically, the unit is faulty. If not, replace the power supply.

3. There is Noise

  • Speaker Power: If the original speaker power is too low, noise will occur at high volumes. Reduce volume or replace speakers.
  • Grounded Speaker Cable: If a speaker cable is grounded, connect the iron speaker cable directly to the unit's speaker cable.

4. Remote Control Cannot Be Used

  • Test Method: Use your mobile phone camera to view the remote control's light while pressing buttons. If it doesn't light up, replace the battery. If it lights up, the remote control is working.

5. Settings Cannot Be Saved (No Memory)

  • The yellow (B+) and red (ACC) lines are connected together (should be separate: yellow to positive, red to key control).
  • Yellow and red wires are reversed. Change their positions.

6. Bluetooth Not Working

  • Turn on the unit, search for its Bluetooth name on your mobile phone, and click Connect. After connecting, you can make calls or play music via Bluetooth.

7. Product Emits Smoke

  • Replace the FUSE. If the problem persists, the internal circuit is burned. After-sales service is required.

8. Sound Cannot Be Adjusted

  • Reset the unit or unplug and replug the power cord.
  • The volume knob may be broken and needs replacement.

9. Reversing Camera Does Not Display

  • Wrong or missing wiring. Refer to the "Reversing Camera Installation" section for connection method.
  • The camera itself may be broken.

10. USB Devices Cannot Be Played

  • Format the USB flash drive to FAT32. Re-download songs and try again. If it still doesn't work, replace the USB drive.

11. FM Does Not Receive Radio Station

  • The antenna plug is not fully inserted, or the antenna/line is disconnected.
  • Search for stations using the AS button or manual forward/backward buttons.
  • If the above doesn't work, unplug the antenna plug and insert a screwdriver or metal strip in its place to test.

12. No Sound Right After Installation

  • Check for short-circuited or connected speaker cables. Reconnect if necessary.
  • Verify the number of speaker cables. If your car has only 2 speaker cables and the unit requires 4, you may need to re-route the car's original wiring. One speaker needs 2 wires, two speakers need 4 wires.

13. No Sound After A While

  • Disconnect all speaker cables from the unit (do not remove them). Find an external speaker and connect it to the gray and purple wires of the unit's tail line (any group of green wires). If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

Maintenance

Keep the unit clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure proper ventilation around the unit to prevent overheating.

Warranty and Support

This product comes with a 365-day free warranty.

LEHX provides professional technical support. If you encounter any issues or require assistance, please contact customer service.

You can also refer to the official user manual PDF for more detailed information: User Manual (PDF)

For additional support, you may contact customer service via WhatsApp by scanning the QR code below:

QR code for Engine WhatsApp customer service

Scan for Engine WhatsApp support.

User Tips

  • Always perform a pre-installation test of the unit to avoid potential issues after full installation.
  • Double-check all wiring connections, especially power and speaker wires, to prevent short circuits and ensure proper functionality.
  • When using wireless CarPlay/Android Auto, ensure both Bluetooth and Wi-Fi are enabled on your mobile device for a stable connection.
  • If experiencing sound issues, systematically check speaker wiring for grounds or shorts before assuming the unit is faulty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.