1. Introduction
Thank you for choosing the JONSBO TH-240 CPU Water Cooler. This integrated liquid cooling system is designed to provide efficient and quiet cooling for your CPU, featuring a digital display on the pump head and customizable ARGB lighting. This manual will guide you through the installation, operation, and maintenance of your new cooler.
Figure 1: JONSBO TH-240 CPU Water Cooler Overview
2. Safety Information
Please read and follow these safety guidelines to prevent damage to the product or injury:
- Ensure your system is powered off and unplugged before installation or maintenance.
- Handle components with care to avoid damage.
- Do not open the pump or radiator, as this may void the warranty and cause leaks.
- Keep the product away from liquids and extreme temperatures.
- If you encounter any issues, refer to the troubleshooting section or contact customer support.
3. Package Contents
Verify that all components are present in your package:
Figure 2: JONSBO TH-240 Package Contents
- JONSBO TH-240 Radiator with Fans
- CPU Pump Head with Digital Display
- Mounting Brackets for Intel and AMD Sockets
- Thermal Paste
- Fan and Pump Screws
- ARGB Connection Cables
- User Manual
4. Specifications
| Feature | Specification |
|---|---|
| Model | TH-240 ARGB |
| Product Type | Integrated Water Cooling (AIO) |
| Supported CPU Sockets | Intel: LGA 1150, LGA 1155, LGA 1151, LGA1200, LGA 1156, LGA 1700, LGA 1851 AMD: AM4, Socket AM5 |
| Radiator Dimensions (L x W x H) | 277mm x 120mm x 27mm |
| Pump Head Dimensions | 72mm x 85.3mm x 57.5mm |
| Fan Air Volume (each) | 21.46-62.40 CFM |
| Fan Bearings | Hydraulic Hybrid Bearings |
| Fan Speed | 700rpm~2400rpm (± 10%) |
| Fan Interface | 4PIN PWM |
| Fan Noise | 21.3-37.3 dB(A) (max) |
| Pump Power | 5.4W |
| Pump Noise | < 30 dB(A) |
| Water Pump Voltage | 12V DC |
| Pump Speed | 2400rpm (± 10%) |
| D-TDP | 260W |
| Heatsink Material | Copper & Aluminum |
| RGB Support | A-RGB (5V-3pin) |
| Certification | CE, RoHS |
Figure 3: JONSBO TH-240 Dimensions
Figure 4: Fan Specifications
5. Installation Guide
5.1. Prepare Your System
- Power off your computer and unplug it from the wall outlet.
- Open your PC case to access the motherboard and CPU area.
- Remove any existing CPU cooler. Clean the CPU surface thoroughly to remove old thermal paste.
5.2. Mount the Radiator and Fans
- Determine the optimal mounting location for the 240mm radiator in your PC case (e.g., top, front).
- Attach the two 120mm fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling strategy.
- Secure the radiator assembly to your chosen mounting location in the PC case.
5.3. Install the CPU Pump Head
- Select the appropriate mounting bracket for your CPU socket (Intel LGA or AMD AM).
- Attach the chosen bracket to the pump head.
- Apply a small amount of the provided thermal paste to the center of your CPU's integrated heat spreader (IHS). The JONSBO TH-240 features a slightly convex copper base (37x33mm) with fine water channels for optimal contact.
- Carefully place the pump head onto the CPU, aligning the mounting holes.
- Secure the pump head with the appropriate screws, tightening them in a diagonal pattern until snug. Do not overtighten.
Figure 5: Copper Base Design
Figure 6: Radiator Internal Structure
5.4. Connect Cables
- **Fan Power**: Connect the 4-pin PWM fan cables from the radiator fans to the CPU_FAN or SYS_FAN headers on your motherboard. The simplified wire hiding design allows for a single cable connection for the radiator fans to the motherboard.
- **Pump Power**: Connect the pump's power cable to an available AIO_PUMP or CPU_OPT header on your motherboard.
- **ARGB Lighting**: Connect the 5V-3pin ARGB cable from the pump head and fans to a compatible 5V-3pin ARGB header on your motherboard. This allows for synchronization with motherboard RGB software.
Figure 7: ARGB Lighting Connection
Figure 8: Simplified Wire Hiding Design
6. Operation
6.1. Initial Power On
After installation, close your PC case, plug in the power, and turn on your system. The pump and fans should start operating, and the ARGB lighting will illuminate.
6.2. Temperature Monitoring
The pump head features a digital display that shows the CPU temperature in real-time. You can also monitor CPU temperature, motherboard model, CPU usage, frequency, and memory usage through the JONSBO control panel software (if available for your system) or your motherboard's monitoring software.
Figure 9: JONSBO Control Panel Software
6.3. ARGB Lighting Control
The JONSBO TH-240 supports Addressable RGB (ARGB) lighting with a 360° four-sided mirror light effect. If connected to a compatible 5V-3pin ARGB header on your motherboard, you can control and synchronize the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync).
Figure 10: ARGB Magic Color Synchronous Light Effect
Video 1: JONSBO TH-240/360 ARGB Series Product Overview, demonstrating RGB lighting effects, CPU temperature display, and different color options.
7. Maintenance
- **Dust Cleaning**: Periodically clean the radiator fins and fan blades with compressed air to prevent dust buildup, which can hinder cooling performance.
- **Cable Management**: Ensure all cables are neatly routed and not interfering with fan operation or airflow.
- **Liquid Check**: While the system is sealed, occasionally check for any signs of leakage around the pump head or tubing connections.
8. Troubleshooting
8.1. No Power to Pump/Fans/RGB
- Check all power and ARGB connections to the motherboard. Ensure they are securely seated in the correct headers.
- Verify that the motherboard headers are enabled in the BIOS/UEFI settings.
8.2. High CPU Temperatures
- Ensure the pump head is making proper contact with the CPU and that thermal paste was applied correctly.
- Check if the pump is running (you might hear a faint hum or feel vibrations).
- Verify that the fans are spinning and that their orientation provides adequate airflow (intake or exhaust, depending on your case setup).
- Clean any dust buildup on the radiator fins.
8.3. ARGB Lighting Not Working or Synchronizing
- Confirm the 5V-3pin ARGB cable is connected to the correct header (not a 12V-4pin RGB header).
- Install or update your motherboard's RGB control software.
- Check the software settings to ensure the ARGB devices are detected and configured.
9. User Tips
- **Pump Head Display Customization**: The digital display on the pump head primarily shows CPU temperature. While it offers dynamic temperature readings, advanced customization like displaying GIFs is typically not supported by the cooler's native software. Check your motherboard's monitoring software for additional display options or third-party tools for more advanced customization if desired.
- **Cable Management**: Take advantage of the simplified wire hiding design by carefully routing the single fan cable and other connections to maintain a clean and organized PC interior, which also improves airflow.
- **Thermal Paste Application**: For best performance, apply a pea-sized dot of thermal paste to the center of your CPU's IHS before mounting the pump head. The pressure from the pump head will spread it evenly.
10. Warranty and Support
JONSBO products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official JONSBO website or contact your local retailer. Keep your proof of purchase for warranty claims.