JIKONG JK-BMS B2A24S20P

Contents

JIKONG Smart Active Balance BMS User Manual

Model: JK-BMS B2A24S20P

Brand: JIKONG

1. Introduction

The JIKONG Smart Active Balance Battery Management System (BMS) is designed for large-capacity series lithium battery packs. It provides comprehensive management and protection features to ensure the safety and longevity of your battery system. This BMS is compatible with various battery chemistries, including LiFePO4, Li-ion, and LTO batteries, and supports configurations from 8S to 24S series.

Key functionalities include precise voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, and over-temperature protection. It also features a coulomb meter for accurate capacity tracking, Bluetooth communication for mobile app control, and optional GPS remote capabilities.

JIKONG BMS with V19 firmware and various battery packs
Figure 1: JIKONG BMS with V19 firmware and example battery pack applications.
JIKONG intelligent active balanced power management system (BMS) overview showing support for 8S-24S series batteries and app compatibility
Figure 2: Overview of JIKONG intelligent active balanced BMS, highlighting battery series support and app compatibility.

2. Safety Precautions

! Important Safety Information

  • Always read this instruction manual thoroughly before installation and operation.
  • When connecting the cables, follow the wiring diagram precisely, connecting from the negative terminal to the positive terminal according to the number of strings.
  • After connecting the balance wires, use a multimeter to verify correct connections before inserting the protection board. Incorrect wiring can cause severe damage.
  • The default connection password for the protection board is 1234, and the default authorization password is 123456. It is crucial to change these passwords immediately after connecting the mobile app to prevent unauthorized access.
  • Do not modify the power lines of the protection board without explicit permission. Unauthorized modifications can lead to uneven overcurrent and damage the protection board.

3. Product Features and Functions

The JIKONG BMS offers a wide array of features designed to optimize battery performance and ensure safety:

  • LED Bluetooth Status Indicator: Provides visual feedback on Bluetooth connection status.
  • APP Bluetooth Remote Operation: Control and monitor your BMS via a dedicated mobile application (Android/iOS/HarmonyOS).
  • Battery Capacity Calculation: Accurately tracks and displays battery capacity.
  • High Precision Voltage Acquisition: Measures cell voltages with an accuracy of ±3mV.
  • High Precision Current Acquisition: Provides accurate current readings.
  • Information Screen Display Support: Compatible with optional external display screens for real-time data viewing.
  • Accurate Time Logging: Records operational data with precise timestamps.
  • Optional Communication Interfaces: Supports RS485 and CAN communication modes.
  • Optional Alarm Function: Alerts users to potential safety risks such as overtemperature, overcharge, and overdischarge.
  • Optional Parallel Function: Enables use in parallel battery pack configurations, requiring compatible parallel modules.
  • Optional Heating Function: Heats the battery at low temperatures to maintain optimal performance and prevent damage.
  • GPS Communication Support: Reserved port for optional GPS devices for battery location tracking.
  • Optional ACC Detection Function: Used to enable discharge and charger detection.
  • Comprehensive Protection: Includes charge/discharge overvoltage, overcurrent, overtemperature, low temperature, and short circuit protection.

3.1 Active Equalization

The BMS employs active equalization technology to transfer energy from higher-voltage cells to lower-voltage cells, ensuring cell consistency and extending battery life. Users can set equalization parameters via the mobile app, including the trigger differential pressure. The default balance current is 1A/2A, adjustable based on battery capacity (recommended not to exceed 0.2C of battery capacity).

3.2 GPS and Display Interface

The BMS includes dedicated ports for an optional GPS module for battery location tracking and an optional display screen for convenient real-time monitoring of battery information.

JIKONG BMS rich interface showing ports for CAN, RS485, BT, NTC, Soft Switch, SOC Indicator, Key Switch, Active Equalizer
Figure 3: Rich interface of the JIKONG BMS, supporting various communication and control options.

3.3 Heating Function

For cold environments, the optional heating function uses a resistance heater or film (10A current) to warm the battery, preventing performance degradation. This function can be controlled via the BMS app, and it is recommended to install a secondary temperature control switch (45-65°C normally closed) for safety.

3.4 Alarm Function

The optional alarm function provides external alerts when the BMS detects critical safety risks such as overtemperature, overcharge, or overdischarge conditions.

3.5 Battery Parallel Function

The BMS supports an optional parallel function for energy storage battery packs. This requires the use of compatible parallel modules and disabling the "charging current limiting" function in the app.

3.6 ACC Detection Function

This optional function enables discharge and charger detection. It can be activated by applying 20V-100V between ACC+ and ACC- or by directly short-circuiting them. A dedicated interface (C_detect+/C_detect-) is provided for 12V charger signal detection.

3.7 Overcharge Protection and Recovery

The BMS includes standard overcharge protection. Users can set the single overcharge protection voltage and recovery voltage via the app. If any cell exceeds the set voltage during charging, the BMS will stop charging. Charging resumes when all cell voltages fall below the recovery voltage.

3.8 Discharge Undervoltage Protection and Recovery

Standard undervoltage protection is provided. Users can set the undervoltage protection voltage, recovery voltage, and automatic shutdown voltage. If any cell drops below the set undervoltage during discharge, the BMS will stop discharging. Discharge resumes when all cell voltages rise above the recovery voltage. The BMS will automatically shut down if any cell voltage falls below the automatic shutdown voltage.

3.9 Charge Overcurrent Protection and Recovery

Standard charge overcurrent protection allows users to set continuous charge current, delay, and release times. If the charging current exceeds the set limit for the specified delay, charging will stop and resume after the release time.

3.10 Discharge Overcurrent Protection and Recovery

Standard discharge overcurrent protection enables users to set continuous discharge current, delay, and release times. If the discharge current exceeds the set limit for the specified delay, discharging will stop and resume after the release time. Note that the maximum continuous discharge current should not exceed the nominal current (150A/200A).

3.11 Overtemperature Protection and Recovery

The BMS features standard charge and discharge overtemperature protection. Users can set protection and recovery temperatures via the app. If the battery temperature exceeds the set limit, the BMS will stop the respective operation (charging or discharging) and resume when the temperature returns to a safe level.

3.12 Low Temperature Protection and Recovery

Standard charge low temperature protection is included. Users can set protection and recovery temperatures. If the battery temperature falls below the set limit, charging will stop and resume when the temperature rises. For extremely cold areas, using the heating function is recommended.

3.13 Short Circuit Protection and Recovery

This is a standard feature with no user-set current trigger. Users can adjust the short circuit protection delay (in microseconds) and recovery time (in seconds) via the app. This helps manage peak currents during charger output or load connection.

3.14 Emergency Switch

The emergency switch function allows the BMS to override certain protection states (e.g., over-temperature, over-discharge) for 30 minutes, providing a temporary operational window in critical situations. This helps prevent immediate shutdowns in scenarios like roadside breakdowns.

3.15 Intelligent Sleep

The intelligent sleep function reduces the BMS's self-consumption by shutting down when in standby (charging/discharging current less than 1A for 26 hours). It can be reactivated via a button or by connecting a charger.

3.16 Communication Function

The BMS supports optional CAN and RS485 communication. Users can select the desired mode and configure the BMS address and communication protocol via the app, referring to the JIKONG Protection Board communication protocol document for details.

4. Installation and Wiring

Proper installation and wiring are critical for the safe and efficient operation of your JIKONG BMS. The JK-BxAxxS-15P/20P series protection board is suitable for 7-24 series lithium battery packs. Wiring methods vary depending on the number of cells in the battery pack.

4.1 General Wiring Instructions

  1. First, weld the main power cables: B- (total negative electrode), P- (load/charger negative), and B+ (total positive electrode).
  2. Then, insert the battery sampling cable (balance wires) in order from low to high voltage cells (B1, B2, B3... up to B23/B24).
  3. After connecting the balance wires, use a multimeter to verify that all connections are correct and secure.
  4. Activate the BMS after power on. Ensure all cables are correctly connected before adding the load and charger.
  5. When disassembling, first disconnect the charger and load, then unplug the battery sampling cable in order from high to low, and finally unplug B+, P-, B-.

4.2 Wiring Diagrams

Wiring diagram for 24-string cells, showing connections for charger, inverter, load, P-, B-, NTC, and individual cell sampling lines (P+ to 1S, 2S, ..., 24S).
Figure 4: Wiring Diagram for 24-String Cells. This diagram illustrates the connections for the charger, inverter, load, main power terminals (P-, B-), NTC temperature sensors, and individual cell sampling lines (P+ to 1S through 24S).
Wiring diagram for 16-string cells, showing connections for charger, inverter, load, P-, B-, NTC, and individual cell sampling lines (P+ to 1S, 2S, ..., 16S).
Figure 5: Wiring Diagram for 16-String Cells. Similar to the 24-string diagram, but adapted for 16 cells.
Wiring diagram for 4-string cells, showing connections for charger, inverter, load, P-, B-, NTC, and individual cell sampling lines (P+ to 1S, 2S, 3S, 4S).
Figure 6: Wiring Diagram for 4-String Cells. Simplified diagram for 4 cells.

4.3 Interface Definition

The BMS features multiple connectors for various functions. Refer to the following table for detailed pin definitions:

JIKONG BMS interface diagram showing ports for CAN/RS485, NTC, GPS, Display/Switch, and Hot (heating).
Figure 7: JIKONG BMS Interface Diagram. This image labels the various ports on the BMS unit.
Connector Pin Name Description
P1 (XH-15AW) - Balance & AcquisitionB-Total negative battery
B1The first battery positive
B2The second battery positive
B3The third battery positive
B4The fourth battery positive
B5The fifth battery positive
B6The sixth battery positive
B7The seventh battery positive
B8The eighth battery positive
B9The ninth battery positive
B10The tenth battery positive
B11The eleventh battery positive
B12The twelfth battery positive
B13The thirteenth battery positive
B14The fourteenth battery positive
B15The fifteenth battery positive
B16The sixteenth battery positive
B17The seventeenth battery positive
B18The eighteenth battery positive
B19The nineteenth battery positive
B20The twentieth battery positive
B21The twenty-first battery positive
B22The twenty-second battery positive
B23The twenty-third battery positive
B24The twenty-fourth battery positive (Total battery positive)
P3 (XH-4AW) - TemperatureT1AFirst temperature sensor pin A
T1BFirst temperature sensor pin B
T2ASecond temperature sensor pin A
T2BSecond temperature sensor pin B
P4 (A1254WF-4A) - CommunicationRS485_BRS485 signal negative terminal
RS485_ARS485 signal positive terminal
CAN_HCAN signal positive terminal
CAN_LCAN signal negative terminal
P5 (1.25T-4PWT) - GPSVGPSPower output, voltage close to B+
TXUART TX, 3.3V
RXUART RX, 3.3V
GNDPower/signal ground
P6 (A1254WF-6A) - DisplayVCCDisplay power output
ADisplay RS485 signal positive
BDisplay RS485 signal negative
GNDNegative terminal
K+Activation signal positive
P7 (A1254WF-3A) - ParallelGNDSignal ground
P-ENParallel module enable signal (output low level to turn on)
P-statusParallel module status signal
P8 (A1254WF-2A) - AlarmVCCAlarm power supply positive
GNDAlarm power supply negative
P9 (A1254WF-5A) - ACCACC+ACC Positive
ACC-ACC Negative
NCNot connected
C_Detect+Charger output 12V positive
C_Detect-Charger output 12V negative
Heating Wire (16AWG-Orange-15CM)HT-Heater element negative electrode
D1Bluetooth Connection IndicatorSteady on when connected, blinking when disconnected.
P-Load/Charger NegativeConnect to external load or negative terminal of charger
B-Battery NegativeConnect to the total negative battery terminal

5. Operation

5.1 APP Installation

To install the mobile application, scan the QR code below. The Android version requires a minimum of Android 7.

QR code for JIKONG BMS mobile app download
Figure 8: Scan this QR code to download the JIKONG BMS mobile app.

5.2 Device Activation

Before powering on the BMS, double-check that the balance cables are correctly connected and that the P- and B- terminals are properly wired. Ensure the BMS is securely fixed to the battery pack. Incorrect connections can lead to malfunction or damage.

The BMS does not have a physical power-on switch. It is designed for charger activation mode: connect a charger with a voltage 2V higher than the battery voltage to power on the BMS after assembly. Alternatively, if you have an optional display screen and button, insert the cable into the display interface and press the button to activate.

5.3 Parameter Setting

Detailed instructions for setting parameters are provided in the separate "Instructions for Setting Protection Board Parameters" document. This includes configuring battery type, cell count, capacity, equalization differential pressure, and various protection thresholds.

JIKONG BMS app interface showing real-time data monitoring and parameter settings
Figure 9: JIKONG BMS App Interface for monitoring and parameter settings.
JIKONG smart app one-click setting interface compatible with mainstream inverter communication protocols
Figure 10: JIKONG Smart App's one-click setting interface, compatible with various inverter communication protocols.
PC intelligent interconnection interface for JIKONG BMS, showing real-time data and settings
Figure 11: PC intelligent interconnection interface for JIKONG BMS, providing comprehensive data viewing and calibration capabilities.

6. Specifications

The JIKONG BMS is engineered with high-quality components and advanced design for reliable performance.

Exploded view of JIKONG BMS showing internal components like Jikong MCU, MOS, NTC, and cooling aluminum alloy.
Figure 12: Exploded view of the JIKONG BMS, detailing its internal components and cooling structure.
JIKONG BMS Next-Gen Intelligent Core with High-Performance MCU and V19 Firmware
Figure 13: The BMS features a next-generation intelligent core with a high-performance MCU and V19 firmware for millisecond-level response and precise data processing.

6.1 Product Dimensions

The dimensions for the JK-BxAxxS-15P/20P series protection board are 162mm × 102mm × 20.4mm (length × width × height).

Product specification diagram showing dimensions of the JIKONG BMS unit: 162mm length, 102mm width, 16.6mm height.
Figure 14: Product Specification with main unit dimensions.
Product specification diagram showing dimensions for various JIKONG BMS models: JK-B1A8S10P (87x153.9x17.6mm), JK-B1A8S20P/JK-B2A8S20P (108x153x17.6mm), JK-B2A8S30P (127.26x174.77x17.6mm).
Figure 15: Product Specification with dimensions for different BMS models.

6.2 Technical Parameters (150A Protection Board)

Parameter Value Unit
Supply Voltage20-100V
Operating Power Consumption<800mW
Operating Temperature-30-70°C
Max. Number of Collection Strings24Strings
Max. Balancing Current1A / 2AA
Max. Charging Current150A
Max. Discharge Current150A
Max. Instantaneous Current300A
Max. Internal Loop Resistance0.365mΩ
Protective Plate Size162*102*20.4mm
Finished Weight560g

6.3 Technical Parameters (200A Protection Board)

Parameter Value Unit
Supply Voltage20-100V
Operating Power Consumption<800mW
Operating Temperature-30-70°C
Max. Number of Collection Strings24Strings
Max. Balancing Current2A
Max. Charging Current200A
Max. Discharge Current200A
Max. Instantaneous Current400A
Max. Internal Loop Resistance0.275mΩ
Protective Plate Size162*102*20.4mm
Finished Weight560g

6.4 Default Parameters (Partial)

Parameter Li-ion (Default) LiFePO4 (Default) LTO (Default) Unit
Balancing Initial Voltage332V
Max. Balancing Current1A / 2A1A / 2A1A / 2AA
Unit Overcharge Voltage4.23.62.7V
Single Overcharge Protection Recovery4.183.552.65V
Monomer Undervoltage Protection2.822.61.8V
Single Undervoltage Protection Recovery2.852.651.85V
Automatic Shutdown Voltage2.82.51.7V
SOC-0% Voltage2.92.61.85V
SOC-100% Voltage4.183.52.65V
Trigger Balancing Differential Pressure0.010.010.01V
Charging Overcurrent Protection Delay303030S
Charge Overcurrent Protection Release Time606060S
Discharge Overcurrent Protection Delay300300300S
Discharge Overcurrent Protection Release Time606060S
Short-circuit Protection Delay555µS
Short Circuit Protection Release Time303030S
Charging Overtemperature Protection707070°C
Charge Overtemperature Restore Temperature606060°C
Discharge Overtemperature Protection707070°C
Discharge Overtemperature Recovery606060°C
Charging Low Temperature Protection-20-20-20°C
Charge Low Temperature Restore Temperature-10-10-10°C
MOS Overtemperature Protection100100100°C
MOS Overtemperature Recovery808080°C
Device Address000/

7. Packing List

The standard package for the JIKONG BMS includes the following items:

Packing list for JIKONG BMS: 1x BMS, 1x Switch (50cm), 1x NTC (40cm), 1x Sampling line B (70cm), 1x Sampling line A (70cm).
Figure 16: Packing List for JIKONG BMS.
  • BMS Unit x 1
  • Switch (long 50cm) x 1
  • NTC (long 40cm) x 1
  • Sampling Line A (long 70cm) x 1
  • Sampling Line B (long 70cm) x 1
  • Packaging Box x 1

Video 1: Unboxing the JIKONG BMS and its components.

8. Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following common troubleshooting steps:

  • BMS Shutdown: If the BMS unexpectedly shuts down, check the mobile app for alarm messages. This could indicate activation of protection features such as overvoltage, undervoltage, overcurrent, overtemperature, or short circuit. Address the underlying cause (e.g., balance cells, reduce load, check temperature).
  • Activation Failure: If the BMS does not activate after connecting the charger or pressing the button, re-verify all wiring connections, especially the balance cables and main power terminals (P-, B-). Ensure the charger voltage is sufficient (2V higher than battery voltage).
  • Communication Issues: If the mobile app or PC software cannot connect to the BMS, ensure Bluetooth is enabled on your device and the BMS is within range. Check the Bluetooth connection indicator (D1) on the BMS. For RS485/CAN, verify cable connections and protocol settings in the app.
  • Inaccurate Readings: If voltage or current readings appear incorrect, perform calibration via the mobile app's parameter settings. Ensure all sampling lines are securely connected.
  • Heating Function Not Working: Check if the heating function is enabled in the app. Verify the NTC temperature sensor connections and ensure any external temperature control switches are functioning correctly.

For more detailed troubleshooting, refer to the comprehensive parameter setting instructions available via the app or the manufacturer's support documentation.

9. User Tips

  • Regular Monitoring: Utilize the JIKONG mobile app to regularly monitor your battery's status, including voltage, current, temperature, and State of Charge (SOC). This helps in proactive maintenance and identifying potential issues early.
  • Password Security: Always change the default connection and authorization passwords immediately after initial setup to protect your BMS from unauthorized access.
  • Environmental Considerations: If operating in cold climates, enable and properly configure the optional heating function to protect your battery cells and maintain optimal performance.
  • Firmware Updates: Keep your BMS firmware updated to the latest version to benefit from improved features, bug fixes, and enhanced performance. Check the app or manufacturer's website for update notifications.
  • Documentation: Keep this user manual and any supplementary parameter setting guides handy for quick reference during installation, configuration, and troubleshooting.

10. Support and Warranty

For technical support, warranty information, or service inquiries, please contact JIKONG customer service or refer to the official JIKONG website. A detailed user manual in PDF format is available for download, which provides in-depth information on all aspects of the BMS.

PDF Manual Reference: A comprehensive user manual (PDF) is available for this product. You can access it via the following link: JIKONG BMS User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.