Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Urageuxy WS0340 7-in-1 Wireless Weather Station. This advanced weather station is designed to provide comprehensive indoor and outdoor weather data, including temperature, humidity, wind speed and direction, rainfall, and barometric pressure, along with a smart weather forecast.
Package Contents
Please check the package contents carefully. If any items are missing or damaged, contact customer support.
- 1*Display Console (Frame Dimensions: 5.4x4.7x0.98 inch; LCD Dimensions: 4.4x3.7 inch)
- 1*Integrated Outdoor Transmitter (Dimensions: 15x7.1x11 inch)
- 1*Wind Vane (Dimensions: 6.7x1.6x2 inch)
- 1*Wind Cup (Dimensions: 5.1x5.1x1.6 inch)
- 1*Rain Funnel (Dimensions: 4.7x2.8 inch)
- 4*Washer (Metal gasket) + 4*Pole Mounting U-bolt Nuts (M5)
- 2*U-bolt (M5) (Dimensions: 2.4x4.2x0.2 inch)
- 1*L-shaped Stainless Steel base (Dimensions: 3x1.5x0.6 inch)
- 1*Wrench (M5) (Dimensions: 2.6x0.8x0.08inch)
- 1*Screwdriver (M3) (Dimensions: 0.4x3.5inch)
- 3*Wind Vane and Wind Cup Mounting screws (Ø3) (Dimensions: M2*6mm (0.23inch) One is a spare part)
- 2*Wind Vane and Wind Cup Waterproof rubber plug (Dimensions: 0.16x0.12inch (Φ4 x 3mm))
- 1*Power Adapter
- 1*Manual (this document)
Setup
1. Outdoor Sensor Assembly
The outdoor sensor is an integrated 6-in-1 unit. Assemble the wind cups and wind vane onto the main sensor body. Ensure all connections are secure.
2. Outdoor Sensor Placement
For optimal performance, mount the outdoor sensor in an open area, free from obstructions that could interfere with wind, rain, or sunlight. Common suitable locations include rooftops, open areas in farms or backyards, and gardens. Use the provided mounting hardware (U-bolts, L-shaped base, washers, nuts, wrench, screwdriver) to securely attach the sensor to a pole or suitable structure. Ensure the sensor is level using the built-in level indicator.
3. Display Console Power Supply
The display console can be powered by the included power adapter or by 3xAAA batteries (not included).
- Power Adapter: Connect the power adapter to the console and plug it into a standard electrical outlet.
- Batteries: Open the battery compartment on the back of the console and insert 3xAAA batteries, observing correct polarity.
4. Display Console Placement
The display console can be placed on a desktop using its integrated stand or mounted on a wall using the hanging holes on the back. Choose a location that is easily visible and within the wireless transmission range of the outdoor sensor.
5. Wireless Connection
The outdoor sensor wirelessly transmits data to the display console. The transmission range is up to 100 meters in open areas and approximately 30 meters under most conditions (e.g., with walls or other obstructions). Ensure the outdoor sensor and display console are within this range for a stable connection.
Operating Instructions
1. Display Console Overview
The VA type clear display provides a comprehensive overview of all weather parameters.
- Sensor Temp/Humidity: Outdoor temperature and humidity readings.
- Indoor Temp/Humidity: Indoor temperature and humidity readings.
- Baro: Barometric pressure.
- Rain: Rainfall measurement (1h, total).
- Wind: Wind speed (current, gust, average) and direction.
- Date/Time/Week: Current date, time, and day of the week.
- Moon Phase: Current moon phase indicator.
- MAX/MIN: Button to view maximum and minimum recorded values.
- ALARM: Button to set alarms.
- SNOOZE/LIGHT: Button for snooze function and backlight adjustment.
- SET: Button for general settings.
- CHANNEL/+: Button to switch channels or increase values during settings.
2. Backlight Brightness Adjustment
The display console features 3 levels of adjustable backlight brightness (100%, 75%, 50%) and an OFF mode. Press the "SNOOZE/LIGHT" button to cycle through the brightness levels.
3. Weather Forecast Function
The weather station provides a 72-hour weather forecast based on barometric pressure changes. The forecast is indicated by intuitive icons: Sunny, Partly Cloudy, Cloudy, and Rainy.
4. Setting Time, Date, and Units
Press the "SET" button to enter the settings mode. Use the "CHANNEL/+" button to adjust values and "SET" again to confirm and move to the next setting. Follow the on-screen prompts to set the time, date, and preferred units for temperature (°C/°F), wind speed (m/s, km/h, mph), and rainfall (mm/inch).
Maintenance
1. Cleaning the Outdoor Sensor
Periodically inspect and clean the outdoor sensor to ensure accurate readings.
- Rain Collector: Remove any debris (leaves, insects) from the rain funnel to prevent blockages.
- Wind Sensors: Ensure the wind cups and wind vane spin freely. Gently remove any obstructions.
- Solar Panel: Keep the solar panel clean to ensure efficient charging.
2. Battery Replacement (Display Console)
If using batteries, replace them when the low battery indicator appears on the display. Use 3xAAA alkaline batteries.
3. Replacing the T/H Sensor
The outdoor sensor features a Swiss-made replaceable Temperature/Humidity (T/H) sensor for long-term accuracy.
- Carefully remove the thermo-hygrometer radiation shield from the outdoor sensor unit.
- Unscrew and remove the old T/H sensor.
- Install the new T/H sensor, ensuring it is securely fastened.
- Reattach the radiation shield.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No outdoor data displayed. |
|
|
| Inaccurate temperature/humidity readings. |
|
|
| Wind speed/direction not registering. |
|
|
| Rainfall readings are incorrect. |
|
|
Specifications
| Measurement | Range | Accuracy | Resolution |
|---|---|---|---|
| Indoor Temperature | 0 to 60 °C | ± 1 °C | 0.1 °C |
| Outdoor Temperature | -40 to 60 °C | ± 0.3 °C | 0.1 °C |
| Indoor Humidity | 10 to 99 % | ± 5% (guaranteed between 20 to 90%) | 1 % |
| Outdoor Humidity | 10 to 99 % | ± 3% (guaranteed between 20 to 90%) | 1 % |
| Rainfall | 0 to 9999 mm (0 to 396 in) | <15mm:±1 mm, 15mm to 9999mm:±7% | <1000mm (0.3mm) >1000mm (1mm) |
| Wind Direction | 0 - 360° | ± 10° (8 point compass) | ± 1° (8 point compass) |
| Wind Speed | 0 to 50 m/s | 2 m/s ~10 m/s:±0.3m/s, 10m/s ~50 m/s: ±10% (whichever is greater) | 0.1 m/s |
| Barometric Pressure | 300 to 1100 hpa | ± 3 hpa | 0.1 hpa |
Physical Dimensions
- Display Console Frame: 5.4 x 4.7 x 0.98 inches (LxWxH)
- Display Console LCD: 4.4 x 3.7 inches (LxW)
- Integrated Outdoor Transmitter: 15 x 7.1 x 11 inches
- Wind Vane: 6.7 x 1.6 x 2 inches
- Wind Cup: 5.1 x 5.1 x 1.6 inches
- Rain Funnel: 4.7 x 2.8 inches
- L-shaped Stainless Steel Base: 3 x 1.5 x 0.6 inches
- Wrench (M5): 2.6 x 0.8 x 0.08 inches
- Screwdriver (M3): 0.4 x 3.5 inches
- Wind Vane and Wind Cup Mounting Screws (Ø3): M2*6mm (0.23 inches)
- Wind Vane and Wind Cup Waterproof Rubber Plug: 0.16 x 0.12 inches (Φ4 x 3mm)
User Tips
- For the most accurate outdoor temperature and humidity readings, ensure the outdoor sensor is not in direct sunlight or near any heat-emitting surfaces.
- Regularly check the outdoor sensor for spiderwebs or debris, especially in the rain collector and wind sensors, as these can affect accuracy.
- When setting up, allow some time for the outdoor sensor and display console to synchronize and stabilize readings.
- Utilize the 3-level backlight adjustment to optimize visibility in different lighting conditions and conserve battery power if running on batteries.
Warranty and Support
Your Urageuxy WS0340 7-in-1 Wireless Weather Station comes with a 2-year warranty, reflecting our confidence in its Swiss craftsmanship, accuracy, and durability.
For technical support, troubleshooting assistance, or warranty claims, please contact Urageuxy customer service through the retailer where you purchased the product. Please have your model number (WS0340) and purchase date available when contacting support.
