1. Introduction
The XIAOVV Q2 BM Baby Monitor is a 4MP WiFi camera designed to provide comprehensive monitoring and security for your baby's room. Featuring two-way audio, motion detection, night vision, and smart alerts, this device helps parents stay connected and ensure their baby's safety and well-being. This manual provides detailed instructions for setting up, operating, and maintaining your baby monitor.

2. Safety Information
2.1 FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Package Contents
Please check the package for the following items:
- XIAOVV Q2 BM Camera
- Bracket (flexible arm with clamp)
- Base
- Screws and wall plugs
- USB Type-C Charging Cable
- Power Adapter (e.g., US Plug)

4. Setup
4.1 Device Initialization
- Install xiaovv APP: Search for "xiaovv" in your mobile app store (App Store for iOS, Google Play Store for Android) or scan the QR code provided in the Quick Guide to download and install the application.
- Power on the Camera: Connect the camera to a power source using the provided USB cable and power adapter.
- Reset the Camera: After the device is powered on, press and hold the Reset button (located near the TF card slot) until you hear the device's voice prompt "Reset completed."
- Add Camera via APP:
- Open the xiaovv APP and register/log in to your account.
- Tap the "+" icon in the app to add a new device.
- Scan the QR code located on the bottom of the camera using the app.

4.2 Network Configuration Methods
There are several ways to connect your camera to the network:
4.2.1 QR Code Network Setup (Recommended)
- Connect your phone to a 2.4GHz Wi-Fi network. (5GHz networks are not supported).
- Enter your Wi-Fi password in the xiaovv APP.
- The APP will generate a QR code. Scan this QR code using the camera. Align the QR code 15~30cm from the camera lens.
- After hearing "Received configuration information," tap "I have heard the tone" in the app to proceed.
4.2.2 Bluetooth Setup Guide (Alternative for QR code issues)
- Open the xiaovv APP, tap "+" on the top-right to scan for devices. If scanning the QR code is not possible, select "Bluetooth Pairing" to enter setup mode.
- Select your target Wi-Fi network, enter the password, and confirm.
- Choose the "BXV+ID" device from the Bluetooth list to connect.
- Configuration succeeds when the device announces "Network connected" and the APP shows "Setup completed."
4.2.3 AP Hotspot Connection
- Reset the camera first.
- In the APP, tap "+" → "Can't find the QR code?" → "AP hotspot connection."
- Select the target Wi-Fi and enter the password.
- Follow the APP instructions to connect to the device's hotspot.
4.3 Physical Installation
The XIAOVV Q2 BM features a flexible stand for versatile placement:
- Crib Attachment: Use the integrated clamp on the flexible bracket to securely attach the monitor to the side of your baby's crib.
- Desktop Placement: The bracket is detachable. Remove the camera from the flexible arm and place it on its base for desktop use.

5. Operation
5.1 Key Features
- 360-Degree Rotation: Easily adjust the viewing angle via the app to monitor every corner of the room.
- 4MP 2K HD Video Resolution: Provides clear 1080P video quality for detailed monitoring.
- Full-color Night Vision: 940nm infrared night vision allows clear images in low-light conditions without disturbing your baby with red light.
- Two-Way Audio: Communicate with your baby remotely through the monitor.
- Crying Detection: Advanced function that triggers an immediate alarm and can play soothing music when your baby cries.
- Motion Detection: Detects movement and sends alerts.
- Virtual Fence: Set up a virtual boundary in the app. The camera will send notifications if the baby approaches or crosses this boundary.
- Sleep Care AI Mode: Monitors your baby's sleep status, including blanket coverage and tummy time, and sends alerts for potential risks.
- Large-Capacity Storage: Supports Micro SD cards up to 128GB for continuous recording.
- Multi-Device Viewing & Sharing: View live feeds on multiple smartphones/tablets and share access with family members.

5.2 Using the App
The xiaovv app is your primary interface for controlling and monitoring the Q2 BM baby monitor.
- Live View: Access real-time video feed from the camera.
- Pan/Tilt/Zoom: Use the on-screen controls to adjust the camera's viewing angle and digitally zoom in.
- Two-Way Audio: Tap the microphone icon to speak through the camera, or listen to your baby through the app.
- Record & Snapshot: Capture video recordings or still images directly from the live feed.
- Alerts: Receive push notifications for crying, motion detection, and virtual fence breaches.
- Settings: Configure alarm sensitivity, night vision mode, and other device settings.


5.3 Cloud Service (Optional)
The xiaovv app offers an optional cloud service subscription for enhanced features:
- Cloud storage for recordings.
- Playback acceleration.
- Advanced alarm recording.
You can subscribe to these services via the [Cloud] interface within the xiaovv APP.
5.4 Video Demonstration
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera lens and body. Do not use liquid cleaners or aerosols.
- Placement: Ensure the camera is placed in a stable location, away from direct sunlight, heat sources, and moisture.
- Software Updates: Regularly check the xiaovv app for firmware updates to ensure optimal performance and security.
- Silicone Casing: The food-grade silicone protective cover can be cleaned with a damp cloth.
7. Troubleshooting
7.1 Common Issues
- Camera not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. Double-check the Wi-Fi password. Try resetting the camera and re-attempting the connection process.
- Poor image quality: Ensure the camera lens is clean and free from obstructions. Check your internet connection speed.
- No sound or poor audio: Verify that the volume on your phone and within the app is turned up. Check for any obstructions around the camera's microphone or speaker.
- App features require payment: Some advanced features like extended cloud storage or specific monitoring algorithms may require a monthly subscription within the xiaovv app. This is an optional service.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | Q2 BM |
| Brand Name | xiao vv |
| Type | VIDEO |
| Style | Baby monitor |
| Connectivity | 2.4GHz WIFI (Wireless) |
| Video Resolution | HD 1080P (3MP Megapixels) |
| Lens Type | CMOS |
| Viewing Angle | 110°±5° |
| Infrared | Yes (940nm red-free night vision) |
| Audio Output | Two-way Audio |
| Storage Capacity | 128 GB (Micro SD card Max) |
| Power Input | DC 5V (Electric Supply) |
| Operating Temperature | -10~±50°C |
| Size | 90*55*115mm |
| Video Coding | H.265-AVI |
| PTZ | Pan 355°, Tilt -15°~57°, Digital Zoom |
| Certification | CE, FCC |

9. User Tips
- Image Quality: Users have reported clear image quality. Ensure good lighting conditions for optimal daytime viewing and proper night vision activation for nighttime.
- Power Source: The camera operates via a cable and does not have an internal battery for wireless use. Ensure it is always connected to a power source during operation.
- Subscription Features: Be aware that some advanced monitoring features within the app may require a paid subscription. Check the app's 'Cloud' section for details on available plans.
10. Warranty & Support
For technical support, please contact: xiaovvsupport@macro-video.com
Manufacturer: GuangDong macro - video smart technologies limited.
Address: 6th Floor of Factory Building, No.72, Baoding Road, Guicheng Street, Dingshu District, Zhaoqing, Guangdong, China.
For a comprehensive user manual in PDF format, please refer to the official document: XIAOVV Q2 BM User Manual (PDF)