FUYANG F-180PLUS

Contents

FUYANG F-180PLUS 61L Industrial Ultrasonic Cleaner

Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your FUYANG F-180PLUS 61L Industrial Ultrasonic Cleaner. This advanced cleaning machine is designed for oil removal, rust removal, dust removal, and 360-degree all-round cleaning, utilizing a high-power industrial shock head for strong and stable cavitation effects.

The F-180PLUS features a new generation of integrated built-in ultrasonic drive system, ensuring simple and convenient operation. Its robust construction includes a 304 stainless steel thick plate with 2.0 thickness, double-sided manual argon arc welding for precise and seamless joints, and an anti-fingerprint shell door panel.

The built-in heating tube provides constant temperature heating, automatically reaching and maintaining the set temperature, with rapid heat-up capabilities. The normal temperature can be adjusted up to 99 degrees Celsius.

2. Safety Information

Please read all safety warnings and instructions carefully before operating the ultrasonic cleaner to prevent injury or damage to the unit.

  • Forbidden Operation: Never operate the ultrasonic cleaner with an empty tank.
  • Liquid Level: Always ensure the tank is filled with liquid to more than 2/3 of its capacity before operation.
  • Chemical Handling: Do not directly touch the cleaning solution with your hands. Use appropriate protective gear.
  • Grounding: Ensure the ground wire is properly connected to prevent electrical hazards.
  • Flammable/Explosive Liquids: Flammable and explosive liquids are strictly forbidden for use in this ultrasonic cleaner.
  • Electrical Protection: An air switch is installed to protect against leakage and overload, enhancing safety.
  • Emergency Stop: The machine is equipped with a power emergency stop switch. Use it to immediately turn off and cut off power when necessary or when the machine is not in use.

3. Product Overview

The FUYANG F-180PLUS is a single-slot industrial ultrasonic cleaner designed for robust performance and ease of use. It features a modern, integrated design that simplifies operation compared to older, more complex systems.

3.1. External Views

Front view of the FUYANG F-180PLUS 61L Industrial Ultrasonic Cleaner
Front View: Shows the control panel and overall design.
Side view of the FUYANG F-180PLUS 61L Industrial Ultrasonic Cleaner with water valves
Side View: Features double water valves for inlet and outlet.
Top-down view of the inner tank of the ultrasonic cleaner with a cleaning basket
Inner Tank View: Shows the stainless steel tank and included cleaning basket.

3.2. Control Panel

The control panel is designed for intuitive operation, allowing easy adjustment of cleaning parameters.

Detailed view of the FUYANG ultrasonic cleaner control panel with labeled functions
Control Panel Layout (Model F-240A shown, functions are similar)
  • Temperature Display: Shows the current and set temperature.
  • Time Display: Shows the remaining and set cleaning time.
  • Temperature +/- Buttons: Adjust the desired cleaning temperature.
  • Heating ON/OFF Switch: Activates or deactivates the heating function.
  • Ultrasonic ON/OFF Switch: Activates or deactivates the ultrasonic cleaning function.
  • Time +/- Buttons: Adjust the desired cleaning duration.
  • Power/Emergency Stop Switch: Large red button for immediate power cut-off.
  • Power Adjustment Knob: Rotary knob to adjust ultrasonic power from 0-100%.

3.3. Key Components & Features

Diagram showing internal components and features like external drive board, double valves, emergency stop, leakage protection, and casters
Internal Components and Features
  • External Drive Board: Utilizes imported electrical components for stable performance.
  • Double Valve Inlet and Outlet: Features 6-point large-diameter valves for faster drainage, made of stainless steel for high temperature and corrosion resistance.
  • Emergency Stop Switch: Provides immediate power cut-off for safety.
  • Leakage Overload Protection: An air switch automatically turns off power during line leakage or voltage instability.
  • High-Quality Casters: Equipped with durable casters for easy movement of the machine.
  • High-Power Industrial Shock Head: Delivers 40,000 vibrations per second with 2-3W power per CM², ensuring powerful and stable cavitation for effective cleaning.

4. Specifications (Model F-180PLUS)

Table of machine function parameters for various ultrasonic cleaner models
Machine Function Parameters (Refer to F-180PLUS row for specific model)
FeatureSpecification
ModelF-180PLUS
Capacity61L
Tank Size (L*W*H)500*350*350 mm
Ultrasonic Power900W
Heating Power1500W
Frequency40KHz
Voltage220V
MaterialStainless steel SUS304
Dimensions (L*W*H)754*520*767 mm (Overall)
Weight20 kg
CertificationCE, RoHS
Core ComponentsMotor, Industrial sensor

5. Setup Instructions

Follow these steps to set up your ultrasonic cleaner for first use:

  1. Placement: Place the machine on a stable, level surface. Ensure adequate ventilation around the unit.
  2. Power Connection:
    Diagram showing 220V plug connection and 380V wiring to an air switch or electric box
    Power Connection Options
    • For 220V models, directly plug the power cord into a compatible socket.
    • For 380V models, connect the machine to an air switch or a small electric box according to the provided wiring diagram (Live wire, N null line, PE earth wire). Ensure proper grounding.
  3. Fill Tank: Add cleaning liquid to the inner tank. The liquid level should be more than 2/3 of the tank's capacity. Do not overfill.
  4. Connect Power: Connect the machine to the power supply. Ensure the emergency stop switch is disengaged (pulled out).

6. Operating Instructions

Once the machine is set up, follow these steps for operation:

  1. Power On: Ensure the machine is properly connected to power.
  2. Set Temperature: Use the 'Temperature +' and 'Temperature -' buttons on the control panel to set the desired cleaning temperature (room temperature to 99°C). Turn on the 'Heating ON/OFF' switch. The machine will automatically start heating until the set temperature is reached.
  3. Set Time: Use the 'Time +' and 'Time -' buttons to set the desired cleaning duration (1 second to 99 minutes). The machine can operate continuously.
  4. Place Items: Carefully place the items to be cleaned into the cleaning basket, then lower the basket into the tank. Ensure items are fully submerged but not touching the bottom of the tank directly.
  5. Start Ultrasonic Cleaning: Turn on the 'Ultrasonic ON/OFF' switch. The ultrasonic cleaning process will begin.
  6. Adjust Power (Optional): Use the 'Power Adjustment Knob' to fine-tune the ultrasonic power from 0-100% based on the cleaning requirements.
  7. Monitor Progress: The digital display will show the current temperature and remaining time.
  8. Stop Operation: Once cleaning is complete, turn off the 'Ultrasonic ON/OFF' switch and the 'Heating ON/OFF' switch. For immediate shutdown, press the 'Power/Emergency Stop' button.
  9. Remove Items: Carefully lift the cleaning basket and remove the cleaned items.
  10. Drain Tank: Use the double valve outlet to drain the used cleaning solution.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ultrasonic cleaner.

  • Draining: After each use, especially with dirty solutions, drain the tank using the double valve outlet.
  • Cleaning the Tank: Clean the inner tank regularly with a soft cloth and mild detergent. Avoid abrasive cleaners that could damage the stainless steel.
  • Exterior Cleaning: The machine features an anti-dirty and anti-fingerprint stainless steel door panel, which can be easily wiped clean.
  • Storage: When not in use for extended periods, ensure the tank is empty and dry. Store the machine in a clean, dry environment.
  • Inspection: Periodically inspect the power cord, plugs, and control panel for any signs of damage.

8. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, please contact customer support.

  • Machine Does Not Power On:
    • Check if the power cord is securely plugged into a working outlet.
    • Ensure the emergency stop switch is disengaged (pulled out).
    • Verify the power supply voltage matches the machine's requirements.
  • Ultrasonic Function Not Working:
    • Ensure the tank is filled with liquid above the minimum level.
    • Check if the 'Ultrasonic ON/OFF' switch is activated.
    • Verify the power adjustment knob is not set to 0%.
  • Heating Function Not Working:
    • Ensure the 'Heating ON/OFF' switch is activated.
    • Check if the desired temperature is set above the current liquid temperature.
  • Automatic Shutdown: The machine is equipped with leakage overload protection. If there is a line leakage or voltage instability, the power will automatically turn off for safety. Check your power source and connections.

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product. However, general best practices for ultrasonic cleaners include:

  • Always use a suitable cleaning solution for the items being cleaned.
  • Pre-rinse heavily soiled items to extend the life of the cleaning solution.
  • Use a cleaning basket to keep items off the tank bottom and to facilitate easy retrieval.
  • For delicate items, consider using a beaker or glass container suspended in the tank, filled with a separate cleaning solution, to avoid direct contact with the tank.

10. Warranty and Support

Your FUYANG F-180PLUS Industrial Ultrasonic Cleaner comes with a 1-year warranty covering manufacturing defects.

For any technical assistance, warranty claims, or after-warranty service, please contact your seller or the manufacturer's customer support. Video technical support is available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.