NOVO D33100

Contents

NOVO D33100 6-Channel Remote Control User Manual

Exclusive for NOVO Brand Curtain Motor and Tubular Motor

1. Product Overview

The NOVO D33100 is a 6-channel remote control transmitter designed exclusively for NOVO brand curtain and tubular motors. It features an LCD screen for easy channel selection and intuitive control buttons for operating your motorized window treatments.

NOVO D33100 6-Channel Remote Control and a curtain motor
Figure 1: NOVO D33100 Remote Control and compatible motor.

2. Specifications

FeatureSpecification
Model NumberNOVO D33100
Voltage110-240V (for motor, remote is battery-powered)
Wattage1W
OriginMainland China
CertificationCE
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
Battery IncludedNo
Remote Dimensions (approx.)14.5cm (L) x 3.8cm (W) x 1.3cm (T)
Package Weight0.3 kg
Package Dimensions15cm (L) x 11cm (W) x 11cm (H)
Angled view of the remote control with dimensions labeled
Figure 2: Remote Control Dimensions.

3. Setup and Pairing

This section details the process of pairing your NOVO D33100 remote control with your NOVO curtain or tubular motor.

3.1. Battery Installation

The remote control requires batteries (not included). Open the back cover of the remote to insert the required batteries, typically AAA type.

Hand holding the remote control with the battery compartment open, showing two AAA batteries
Figure 3: Remote Control Battery Compartment.

3.2. Pairing Method (Code Motor and Remote Control)

Follow these steps to pair your remote control with the motor:

  1. Select the first indicator light: Ensure the remote is ready for pairing.
  2. Initiate Pairing on Motor: Open the back cover of the motor to locate the P2 key (setting key). Power on the motor. Press and hold the P2 key for 3 seconds. The motor indicator light will turn on.
  3. Initiate Pairing on Remote: Press the PS key on the remote control once. The motor indicator light will flash slowly.
  4. Confirm Pairing: Press the P2 key on the motor again. The motor indicator light will flash quickly, indicating successful pairing.

After successful pairing, test the up and down keys on the remote control to ensure proper functionality.

Video 1: Demonstration of pairing the motor and remote control.
Remote control next to a tubular motor, showing the motor's end with the P2 button
Figure 4: Remote control and motor, highlighting the P2 button location.

4. Operating Instructions

The NOVO D33100 remote control allows you to operate up to 6 different channels (motors) independently or simultaneously.

Front view of the NOVO D33100 6-Channel Remote Control with LCD screen and buttons
Figure 5: NOVO D33100 Remote Control Layout.

4.1. Button Functions

  • LCD Screen: Displays the currently selected channel.
  • Up Arrow (^): Moves the curtain/blind upwards.
  • Down Arrow (v): Moves the curtain/blind downwards.
  • Stop/Pause (—): Stops the curtain/blind at its current position.
  • Channel Selection (< / >): Use these buttons to cycle through the 6 available channels. The selected channel number will be shown on the LCD screen.

4.2. Controlling Motors

  1. Select Channel: Use the channel selection buttons (< / >) to choose the desired motor (channel 1-6) you wish to control.
  2. Operate Motor: Press the Up Arrow to raise, Down Arrow to lower, or Stop/Pause to halt the motor.
  3. Group Control: If a channel is programmed for multiple motors, all motors assigned to that channel will respond simultaneously.

5. Maintenance

5.1. Cleaning

To clean the remote control, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these may damage the device.

5.2. Battery Replacement

When the remote control's performance degrades or the LCD screen becomes dim, it's time to replace the batteries. Open the battery compartment on the back of the remote and replace the old batteries with new ones of the correct type (typically AAA). Ensure correct polarity.

6. Troubleshooting

  • Remote not responding:
    • Check if the batteries are correctly installed and have sufficient charge. Replace if necessary.
    • Ensure the remote is within range of the motor.
    • Verify that the correct channel is selected on the remote control.
    • If the issue persists, attempt to re-pair the remote control with the motor following the steps in Section 3.2.
  • Motor not responding:
    • Check if the motor is properly powered on and connected.
    • Ensure the motor's indicator light is functioning as expected during pairing.
    • If the motor does not respond after re-pairing, there might be an issue with the motor itself or its power supply.

7. User Tips

  • Battery Purchase: Due to shipping restrictions, batteries for the remote control are not included. Please purchase the required batteries (typically AAA) from your local market.
  • Visual Accuracy: Product photos are taken of real products, but slight color discrepancies may occur due to lighting and computer screen settings.

8. Warranty and Support

For detailed guides and further documentation, please refer to the official user manual PDF available here.

If you encounter issues not covered in this manual or require further assistance, please contact the seller or manufacturer's customer support for specialized help.

© 2024 NOVO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.