BEBONCOOL MC200 Mobile Phone Gamepad User Manual

1. Introduction

The BEBONCOOL MC200/MC202 is a high-performance mobile gaming controller designed to enhance your gaming experience on both Android and iOS devices. Featuring advanced Hall Effect technology for joysticks and linear triggers, it provides precise, drift-free control and rapid response times. This manual will guide you through the setup, operation, and maintenance of your gamepad.

Figure 1: BEBONCOOL MC202 Gamepad with phone, illustrating RGB Hall Embedded Gamepad for iOS/Android compatibility.

2. Setup

2.1 Device Compatibility

The gamepad is compatible with a wide range of iPhone and Android mobile devices. It supports phones with a length between 100mm and 185mm (3.9-7.2 inches), allowing for use even with a protective case.

Figure 2: Gamepad illustrating its stretchable design and a list of compatible phone models and dimensions.

2.2 Wireless Connection (Bluetooth Pairing)

Follow these steps to pair your BEBONCOOL gamepad with your mobile device:

1. Power On and Pairing Mode: Press and hold the MODE button on the controller for 3 seconds. The MODE button will flash blue light quickly, indicating it is in pairing mode.
2. Open Bluetooth Settings: On your mobile device, navigate to the Bluetooth settings.
3. Select Gamepad: Look for the corresponding Bluetooth name (e.g., "XBOX Wireless Controller") in the list of available devices and select it to pair.
4. Reconnect: Once connected, if Bluetooth is turned on on your phone, simply press the MODE button on the controller to automatically reconnect.
5. Automatic Shutdown: If the mobile phone's Bluetooth is turned off or the MODE button is held for 5 seconds, the controller will automatically shut down.

Figure 3: Detailed Bluetooth pairing instructions for both iOS and Android devices.

3. Operating Instructions

3.1 Hall Effect Joysticks

The gamepad features Hall Effect Joysticks, which utilize electromagnetic induction for precise, drift-free, and wear-resistant performance. This technology ensures low latency and sensitive operation, providing a highly accurate gaming experience without dead zones.

Figure 4: Diagram explaining the Hall Effect Joystick mechanism, highlighting drift-free and sensitive operation.

3.2 Hall Effect Linear Triggers

Experience enhanced control in racing, shooting, and action games with Hall Effect Linear Triggers. These triggers offer 256 layers of change with less than 0.1mm level accuracy, allowing for nuanced input.

Figure 5: Diagram detailing the Hall Effect Linear Trigger, showing its precise input capabilities.

3.3 RGB Lighting

Customize your gaming aesthetic with 10 kinds of gorgeous RGB lighting options. Cycle through different lighting modes and adjust brightness levels to match your visual gaming vibe. The joysticks feature RGB lighting.

Figure 6: Image showcasing the gamepad's RGB lighting on joysticks and buttons, with options for brightness, modes, and colors.

3.4 Turbo Function & Dual Motor Vibration

Activate the Turbo function for rapid button presses by simultaneously pressing the Turbo button and the desired action button. The burst speed can be set to three levels: 5/sec, 12/sec, or 20/sec. The integrated dual motors provide precise vibration feedback for a more immersive gaming experience.

3.5 Programmable Functions

The gamepad includes programmable 'ML' and 'MR' keys, allowing you to customize up to 21 keys for game-winning combos. Refer to the diagram below for how to enter programming mode.

Figure 7: Diagram illustrating how to program the 'ML' and 'MR' keys for custom game combos.

3.6 Compatible Gaming Platforms and Games

The controller supports a wide array of gaming platforms and games that natively support controllers, including:

• Remote Play: Xbox Remote Play, PS Remote Play
• Cloud Gaming: Xbox Cloud, Steam Link, GeForce Now, Rainway, Stadia, Nvidia, Luna
• Mobile Platforms: MFi Apple Arcade, Google Play
• Popular Games: Call of Duty, Roblox, Minecraft, Halo, Forza Horizon, Spider-Man, Dead Cells, Apex Legends, Battlefield, Diablo Immortal, Genshin Impact, Asphalt 9, Wreckfest, Death's Door, Conan Exiles, Far Cry 6, Remnant, Darktide

Figure 8: Visual representation of various compatible gaming platforms and popular game titles.

4. Maintenance

• Cleaning: Use a soft, dry cloth to clean the surface of the gamepad. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the device.
• Storage: Store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: The gamepad has a built-in battery. Avoid fully discharging the battery frequently to prolong its lifespan. Charge regularly, even if not in use for extended periods.
• Avoid Impact: Do not drop or subject the gamepad to strong impacts, as this can damage internal components.

5. Troubleshooting

Gamepad does not connect via Bluetooth:

• Ensure the gamepad is fully charged.
• Verify the gamepad is in pairing mode (MODE button flashing blue).
• Check your phone's Bluetooth settings and ensure Bluetooth is enabled.
• Forget the device in your phone's Bluetooth settings and attempt to pair again.
• Restart both your phone and the gamepad.

Buttons or joysticks are unresponsive:

• Ensure the gamepad is properly connected to your device.
• Check if the game you are playing natively supports controllers.
• Restart the gamepad and your mobile device.
• If using a Hall Effect joystick, drift is unlikely, but if issues persist, contact support.

Phone does not fit securely:

• Ensure your phone's dimensions are within the supported range (100mm-185mm).
• Remove any bulky phone cases if they prevent a secure fit.

6. Specifications

7. User Tips

No specific user tips from reviews or Q&A were provided for this product.

8. Warranty and Support

For any issues or questions regarding your BEBONCOOL MC200/MC202 gamepad, please refer to the seller's support channels. Keep your purchase receipt for warranty claims, if applicable. Specific warranty terms may vary by region and seller.