1. Introduction
The MILESEEY S6 Laser Distance Meter is a versatile and accurate electronic measuring tool designed for various applications, including construction, home renovation, and industrial use. It offers multiple measurement functions such as single distance, continuous measurement, area, volume, and indirect (Pythagorean) measurements. With its high measurement accuracy and durable IP54 rating, the S6 provides reliable performance for both professionals and DIY enthusiasts.

2. Safety Information
Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in laser exposure, electric shock, fire, or serious injury.
2.1 Laser Safety
- The MILESEEY S6 emits a Class 1M laser (<1mW).
- Do not stare directly into the laser beam.
- Do not aim the laser beam at people or animals.
- Avoid direct eye exposure to the laser.
- Do not disassemble the device; laser radiation can be dangerous.
3. Product Components and Functions
Familiarize yourself with the main components and buttons of your MILESEEY S6 Laser Distance Meter:

- Level Bubble: For horizontal alignment.
- Measure Button (MEAS): Initiates single or continuous measurements.
- Menu Button: Accesses different measurement modes and settings.
- Measuring Reference/Unit Button (UNIT): Short press to change measuring reference point (front/rear of device). Long press to change measurement units (m/ft/in/ft+in).
- Memory Button: Recalls stored measurement data (up to 30 sets).
- Add(+)/Subtract(-) Button: Performs addition or subtraction of measurements.
- Mute Button: Toggles sound on/off.
- ON/OFF/Clear/Return Button (CLEAR): Powers the device on/off, clears current measurement, or returns to the previous screen.

4. Setup
4.1 Battery Installation
The MILESEEY S6 is battery-powered. Batteries are not included with the device. Please install appropriate batteries before first use.
- Locate the battery compartment cover on the back of the device.
- Open the cover.
- Insert the required batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
4.2 Power On/Off
- To Power On: Press the ON/OFF/Clear/Return button. The LCD display will light up.
- To Power Off: Press and hold the ON/OFF/Clear/Return button for a few seconds. The device will also automatically power off after a period of inactivity to save battery.
4.3 Unit and Reference Point Selection
- Changing Units: Long press the UNIT button to cycle through measurement units: meters (m), feet (ft), inches (in), and feet+inches (ft+in).
- Changing Reference Point: Short press the UNIT button to switch the measurement reference point between the front edge and the rear edge of the device. An icon on the display will indicate the current reference point.
5. Operating Instructions
The MILESEEY S6 offers various measurement functions. The typical measurement speed is 0.5 seconds.
5.1 Single Distance Measurement
- Point the laser at the target.
- Press the MEAS button once. The laser will activate.
- Press the MEAS button again to take the measurement. The result will be displayed on the screen.
5.2 Continuous Measurement (Tracking)
- Press and hold the MEAS button. The device will enter continuous measurement mode, displaying real-time distance as you move the device.
- The display will show current, minimum, and maximum values.
- Press the MEAS button again to stop continuous measurement.
5.3 Area Measurement
- Press the Menu button until the area measurement icon (rectangle) appears on the display.
- Measure the first side (e.g., length) by pressing MEAS.
- Measure the second side (e.g., width) by pressing MEAS.
- The device will automatically calculate and display the area.
5.4 Volume Measurement
- Press the Menu button until the volume measurement icon (cube) appears on the display.
- Measure the length by pressing MEAS.
- Measure the width by pressing MEAS.
- Measure the height by pressing MEAS.
- The device will automatically calculate and display the volume.
5.5 Indirect Measurement (Pythagorean Theorem)
This mode is used to measure inaccessible heights or distances using the Pythagorean theorem.
- Press the Menu button until the indirect measurement icon (triangle) appears. There might be different Pythagorean modes (e.g., two-point or three-point). Select the appropriate one.
- Follow the on-screen prompts to measure the required sides of the triangle (e.g., hypotenuse, base).
- The device will calculate and display the unknown side.
5.6 Adding/Subtracting Measurements
- Take a measurement.
- Press the Add(+)/Subtract(-) button.
- Take another measurement.
- The display will show the sum or difference. You can continue adding or subtracting.
5.7 Data Storage and Recall
The device can store up to 30 sets of measurement data.
- Store: Measurements are automatically stored.
- Recall: Press the Memory button to view stored data. Use the arrow buttons (if available, or Add(+)/Subtract(-)) to navigate through the stored records.

5.8 Mute Function
Press the Mute button to turn the device's sound on or off. This is useful for quiet environments.


6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Pay special attention to keeping the laser lens clean for accurate measurements.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- Protection: The device has an IP54 rating, meaning it is protected against dust ingress and splashing water. However, avoid submerging it in water or exposing it to heavy rain.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low or dead batteries; Incorrect battery installation | Replace batteries; Check battery polarity |
| Inaccurate measurements | Dirty laser lens; Unstable measuring surface; Obstruction in laser path; Incorrect reference point | Clean laser lens; Ensure stable position; Clear laser path; Verify reference point setting |
| Laser not visible | Bright ambient light; Long distance measurement | Use in lower light conditions; Use a target plate for better visibility over long distances |
| Display error message | Measurement out of range; Internal error | Ensure target is within measurement range; Power off and restart the device. If problem persists, contact support. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | MiLESEEY |
| Model | S6 |
| Measurement Accuracy | ±2mm |
| Measurement Range Options | 40M, 60M, 80M, 100M |
| Laser Hazard Level | Class 1M (<1mW) |
| Power Type | Battery-Powered (Batteries not included) |
| Data Storage | 30 sets |
| IP Rating | IP54 (Dust protected, splash proof) |
| Certifications | CE, FCC, RoHS, WEEE, SGS, ISO9001 |
| Origin | Mainland China |

9. User Tips
- For best accuracy, ensure the device is held steady or placed on a stable surface during measurement.
- When measuring long distances or in bright conditions, a reflective target plate can improve laser visibility and measurement accuracy.
- Always double-check your selected measurement reference point (front or rear of the device) to avoid errors.
- The mute function is particularly useful in environments where beeping sounds might be disruptive, such as libraries or quiet workspaces.

10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the MiLESEEY Official Store directly. Keep your proof of purchase for any warranty claims.