Jonsbo D200

Contents

JONSBO D200 MATX Case User Manual

Model: D200 | Brand: Jonsbo

1. Product Overview

The JONSBO D200 chassis features a popular curved integrated bent tempered glass design, offering users an ultra-wide hardware display perspective. It includes a digital display screen for real-time temperature monitoring, enhancing both aesthetics and functionality. The chassis combines a large-area mesh panel with multiple fan positions to effectively improve heat dissipation. Designed for both air-cooled and water-cooled setups, it supports long graphics cards within its compact external dimensions. The overall design incorporates oblique corners and an e-sports style wire drawing process on the power compartment panel, providing an elegant and dynamic visual effect, especially with ARGB lighting.

Jonsbo D200 MATX Case in black and white
Figure 1: Jonsbo D200 MATX Case in black and white, highlighting digital display, ATX power supply support, and 240mm water cooling compatibility.
Video 1: Jonsbo D200 MATX Case promotional video showcasing its design, features, and lighting options.

2. Product Specifications

AttributeValue
Product ModelD200
ColorWhite / Black
Case Size (D x W x H)437mm × 216mm × 419mm (including foot pads)
MaterialSPCC / Tempered Glass / ABS
Hard Disk Slot (Backplane)2.5-inch SSD × 1
Power Supply Bay3.5" HDD × 1 or 2.5" SSD × 1
Front InterfaceUSB3.2 Gen2 Type-C × 1 / USB3.0 × 2 / AUDIO × 1 + MIC × 1 (2 in 1)
Motherboard TypeMini-ITX / Micro-ATX
PSU SupportATX PS2 ≤ 170mm (with HDD installed at bottom), ≤ 235mm (without HDD installed at bottom)
Max GPU Length≤ 410mm
Max CPU Cooler Height≤ 171mm
Fan Position (Top)120mm × 3 / 140mm × 2 (optional) / 240 Water cooling (not-standard)
Fan Position (Rear)120mm × 1 (non-standard)
Fan Position (Power Compartment)120mm × 3 (non-standard)
Case Net Weight6.11 KG
Expansion Slots5
With Side Panel WindowYes
RGB SupportNO RGB (Case itself, but supports ARGB equipment)

Important Notice: If there are any differences in product standard parameters due to product upgrades or other reasons, please refer to the actual product for accuracy.

3. Key Features

  • Curved Integrated Tempered Glass: Offers a 270-degree ultra-wide view of your internal components without obstructive columns. The glass panels are designed for snap-on external pull and disassembly for convenience.
    Curved integrated tempered glass panel
    Figure 2: Curved integrated tempered glass panel providing a wide view of internal components.
  • Digital Temperature Display: A built-in digital display screen allows for real-time monitoring of CPU temperature, adding a functional and aesthetic touch.
    Digital temperature display on Jonsbo D200 case
    Figure 3: Close-up of the digital display screen for real-time temperature monitoring.
  • Optimized Cooling Support:
    • Fan Positions: Supports up to 7 fan positions for effective heat dissipation.
      • Top: 3 x 120mm or 2 x 140mm (optional)
      • Rear: 1 x 120mm (optional)
      • Power Compartment: 3 x 120mm (optional)
    • Water Cooling: Compatible with 240mm water cooling radiators at the top.
      Water cooling installation diagram
      Figure 4: Diagram illustrating water cooling installation with a 240mm radiator at the top.
    • Air Cooling: Supports CPU coolers up to 171mm in height.
      Air cooling installation diagram
      Figure 5: Diagram illustrating air cooling installation with various fan placements.
  • High Compatibility:
    • Motherboard: Supports Mini-ITX and Micro-ATX motherboards.
    • GPU: Accommodates graphics cards up to 410mm in length, with 5 PCI expansion slots. Includes a standard adjustable graphics card support bracket.
      GPU length limit diagram
      Figure 6: Diagram showing the maximum GPU length of 410mm.
      Adjustable graphics card holder
      Figure 7: Adjustable graphics card holder for secure GPU installation.
    • PSU: Supports ATX PS2 power supplies up to 170mm (with bottom HDD) or 235mm (without bottom HDD). The power supply compartment has an independent air duct for better cooling and stability.
      Under-mounted power compartment
      Figure 8: Illustration of the under-mounted power supply compartment and storage options.
    • Storage: Includes 1 x 2.5-inch SSD slot on the backplane and 1 x 3.5-inch HDD or 2.5-inch SSD slot in the power supply bay.
  • Convenient Front I/O: Side-mounted interface with Power button, Reset button, 2 x USB 3.0 (5Gbps), 1 x USB 3.2 Gen 2 Type-C (10Gbps), and a 2-in-1 Audio/Mic jack.
    Side-mounted front interface
    Figure 9: Diagram of the side-mounted front I/O panel.
  • Dust-proof Design: Features magnetic dust-proof screens on the top and bottom for easy cleaning and maintaining a tidy interior.
    Magnetic dust filters
    Figure 10: Magnetic dust filters on the top and bottom panels.
  • Multi-sided Quick Disassembly: Designed for convenient disassembly of multiple panels, facilitating easy maintenance and upkeep.
    Exploded view of case panels for disassembly
    Figure 11: Exploded view demonstrating the multi-sided quick disassembly feature.

4. Setup and Installation

This section provides general guidelines for installing components into your JONSBO D200 MATX Case. Always refer to the specific manuals for your motherboard, power supply, and other components for detailed instructions.

4.1 Preparing the Chassis

  1. Carefully unpack the chassis and remove all packaging materials.
  2. Place the chassis on a stable, flat surface.
  3. Remove the tempered glass side panels and other removable panels by gently pulling them outwards (refer to Figure 11 for disassembly).

4.2 Motherboard Installation

  1. Ensure the correct standoffs are installed for your Mini-ITX or Micro-ATX motherboard.
  2. Carefully place the motherboard into the chassis, aligning it with the standoffs and I/O shield opening.
  3. Secure the motherboard with the appropriate screws.
  4. Install your CPU cooler (up to 171mm height supported).

4.3 Power Supply Installation

  1. The D200 supports ATX PS2 power supplies.
  2. Install the power supply in the dedicated compartment at the bottom of the chassis.
  3. Secure the power supply with screws from the rear of the chassis.
  4. Route power cables through the designated cutouts for cable management.

4.4 Graphics Card (GPU) Installation

  1. The chassis supports GPUs up to 410mm in length.
  2. Remove the necessary PCI slot covers.
  3. Insert the GPU into the appropriate PCI-E slot on your motherboard and secure it.
  4. Utilize the adjustable graphics card support bracket to prevent GPU sag (refer to Figure 7).

4.5 Storage Device Installation

  • 2.5-inch SSD: Mount one 2.5-inch SSD on the backplane behind the motherboard tray.
  • 3.5-inch HDD / 2.5-inch SSD: Install one 3.5-inch HDD or 2.5-inch SSD in the power supply bay.

4.6 Fan and Water Cooling Installation

  • Install optional fans in the top, rear, and power compartment positions as desired (refer to Figures 4 and 5 for recommended configurations).
  • For water cooling, install a 240mm radiator at the top position.

4.7 Cable Management

Utilize the partition back line space behind the motherboard tray for efficient cable management to ensure optimal airflow and a clean aesthetic (refer to Figure 12).

Internal layout with cable management space
Figure 12: Internal layout showing space for cable management behind the motherboard tray.

5. Operating Instructions

5.1 Power On/Off and Reset

The Power On and Reset buttons are located on the side-mounted front interface (refer to Figure 9).

  • Power On: Press the Power On button to start your system.
  • Power Off: Press and hold the Power On button for a few seconds to force shut down, or use your operating system's shutdown function.
  • Reset: Press the Reset button to restart your system.

5.2 Front Panel Connectivity

The side-mounted front interface provides convenient access to various ports (refer to Figure 9):

  • USB 3.2 Gen2 Type-C: For high-speed data transfer (up to 10Gbps) with compatible devices.
  • USB 3.0: Two ports for standard USB connectivity (up to 5Gbps).
  • Audio/Mic (2-in-1): A single jack for connecting headphones with a microphone.

5.3 Digital Temperature Display

The integrated digital display screen shows real-time CPU temperature. For software download and installation related to this feature, please refer to the product manual or Jonsbo's official website.

6. Maintenance

6.1 Cleaning Dust Filters

The JONSBO D200 case is equipped with magnetic dust-proof screens on the top and bottom panels. Regularly cleaning these filters is crucial for maintaining optimal airflow and preventing dust buildup inside your system.

  1. Gently remove the magnetic dust filters from the top and bottom of the chassis.
  2. Clean the filters using compressed air, a soft brush, or by rinsing them with water (ensure they are completely dry before reattaching).
  3. Reattach the magnetic dust filters to their respective positions.
Magnetic dust filters
Figure 13: Magnetic dust filters for easy cleaning.

6.2 General Cleaning

  • Use a soft, dry cloth to wipe down the exterior surfaces of the chassis.
  • For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks.
  • Avoid using harsh chemicals or abrasive materials that could damage the finish.

7. Troubleshooting

This section addresses common issues you might encounter during the setup or operation of your JONSBO D200 MATX Case. If you experience problems not covered here, please consult Jonsbo's official support resources.

  • System not powering on:
    • Check all power connections: ensure the power supply is properly seated and connected to the motherboard and components.
    • Verify the front panel power switch cable is correctly connected to the motherboard's header.
    • Test the power supply independently if possible.
  • No display output:
    • Ensure your monitor cable is connected to the graphics card (GPU) and not the motherboard's integrated graphics port.
    • Reseat the graphics card and RAM modules.
    • Check if the GPU requires additional power connectors from the PSU.
  • High temperatures displayed:
    • Verify that all case fans and CPU cooler fans are spinning correctly.
    • Ensure proper thermal paste application on the CPU cooler.
    • Check for any obstructions to airflow inside the case.
    • Clean dust filters regularly (refer to Section 6.1).
  • Front panel USB/Audio ports not working:
    • Ensure the front panel USB and audio cables are correctly connected to the corresponding headers on your motherboard.
    • Check your motherboard's manual for correct header pinouts.

8. User Tips

  • When installing larger GPUs, consider removing the bottom HDD/SSD cage to allow for PSUs longer than 170mm, maximizing compatibility and cable routing space.
  • Take advantage of the multi-sided quick disassembly feature for easier access during component installation and routine cleaning.
  • For optimal aesthetics and airflow, plan your cable routing carefully, utilizing the space behind the motherboard tray.
  • If using ARGB lighting, ensure compatibility with your motherboard's RGB headers and software for synchronized effects.

9. Warranty and Support

Jonsbo products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Jonsbo website. In case of technical issues or inquiries, please contact Jonsbo customer support through their official channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.