1. Introduction
Preface
Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.
Safety Precautions
- Install only by qualified professionals to avoid damaging vehicle electrical systems.
- Disconnect car battery before installation to prevent short circuits.
- Ensure all connections are secure and insulated to avoid fire hazards.
- Do not block airbags, driver visibility, or vehicle controls during installation.
- Avoid modifying essential vehicle safety systems or wiring.
- Operate connected devices only when parked; never distract from driving.
- Regularly check for loose connections or overheating during use.
- Stop using immediately if unusual smells, sounds, or malfunctions occur.
- Ensure product usage complies with local traffic laws and regulations.
- Keep product away from water, extreme temperatures, and direct sunlight when not in use.
2. Key Features
The ANYFAR Retrofit Kit integrates seamlessly with your vehicle's existing display and controls, offering a range of modern connectivity options.
- Wireless & Wired Connectivity: Enjoy both wireless and wired CarPlay and Android Auto through advanced dual-band WiFi (2.4G/5.8G) and Bluetooth 5.0 technology.
- OEM Integration: Maintains your vehicle's original display and all factory controls including rotary controller, steering wheel buttons, and touchscreen functionality.
- Enhanced Audio Quality: Built-in DSP processor with fully adjustable EQ settings delivers superior sound quality through your factory Harman audio system.
- Voice Control Enabled: Activate Siri or Google Assistant through steering wheel controls or voice commands for enhanced driving safety.
- Camera Ready: Features 2 RCA inputs for adding rear and front cameras (supports PAL, NTSC formats).
- Plug & Play Installation: Non-destructive installation requires no wire cutting or modification to original wiring.
- Front/Rear/360 Input: The intelligent module supports video decoding and can be equipped with frontview, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.
3. Compatibility
This retrofit kit is designed for specific Land Rover and Jaguar models with Harman head units and 8-inch or 10.25-inch screens. Please verify your vehicle's compatibility before installation.
| Brand | Car Model | Years | Screen Size |
|---|---|---|---|
| Land Rover | Discovery 5 | 2017-2018 | 10.25 inch |
| Ranger Rover | 2018 | ||
| Discovery Sport/Evoque | 2017-2018 | ||
| E/F-PACE | 2019 | ||
| Jaguar | XEL/XFL/XJL | 2016-2019 | 10.25 inch |
| F-TYPE | 2017-2019 | ||
| F-PACE | 2017-2019 |
Note: Please verify compatibility by contacting support with photos of your center console if unsure. The kit is compatible with both 8-inch and 10.25-inch Harman head units.
4. Package Contents
The package includes all necessary components for installation:
- CarPlay Decoder Unit × 1
- Power Harness × 1
- Adapter Cables × 3 (A, B, C)
- USB Connection Cable × 1
- LVDS IN Cable × 1
- LVDS OUT Cable × 1
- User Manual × 1
5. Setup and Installation
Professional installation is recommended for optimal performance and to avoid damage to your vehicle's electrical system. Always disconnect the car battery before beginning installation.
Wiring Diagram
The product comes with three CAN-bus adapter harnesses. Choose the one that matches your vehicle model—preferably the connector behind the center-console A/C control panel. If the first two harnesses don't fit, use the main-unit connector located under the front passenger seat instead.
DIP Settings & Switch
The DIP switch settings are crucial for proper functionality based on your car model and screen size. Here's a guide:
| Car Model | Year | Screen Size | DIP Setting |
|---|---|---|---|
| E/F-PACE | 2019 | 10.25 inch | 1 3 4 7 ON |
| XEL/XFL/XJL | 2016-2019 | 10.25 inch | 1 2 5 7 ON |
| Discovery 5 | 2017-2018 | 10.25 inch | 1 2 3 4 7 ON |
| Discovery Sport/Evoque | 2019 | 10.25 inch | 1 5 7 ON |
| F-TYPE | 2017-2019 | 10.25 inch |
Note: Please ensure the dial is set to "ON". Since screen configuration cannot be obtained directly from the original system, all DIP options are provided. Try them one by one in order. After switching the DIP, be sure to restart the decoder for the changes to take effect.
Rear View Camera Input
This CarPlay interface supports camera input for clear rearview imagery. Connect the camera as shown in the guide.
Radar and Trajectory Settings
If your aftermarket camera supports a reversing trajectory line, uncheck the A1 box in the MCU setup to display it. For aftermarket radar, uncheck the A2 box to enable it. If you want to connect a front camera, choose the "A3" option.
To access these settings: Enter the system settings, click "Factory mode - Advanced mode", enter password "888888", then navigate to MCU setup. Uncheck the relevant options (A0 for reversing rear view, A1 for trajectory, A2 for radar, A3 for front camera). Return to the previous level and click "Restart system" for changes to take effect.
6. Operating Instructions
Switching Between OEM and CarPlay/Android Auto
To switch between the factory OEM car system and the CarPlay/Android Auto system, long press the "U" button on the car knob. Alternatively, double-click the power button or the hazard light button on the central control panel to switch between the OEM screen and the interface screen.
Button Control
| Button | Operation | Function |
|---|---|---|
| Call Answer | Short press | Answer the phone |
| Call End | Short press | Hang up the phone |
| Next Track | Short press | Next song |
| Previous Track | Short press | Previous song |
| Volume Up | Short press | Increase the volume |
| Volume Down | Short press | Decrease the volume |
| Button | Operation | Function |
|---|---|---|
| Power Button | Double Click | Switch OEM screen to interface screen OR Interface screen to the OEM screen |
| Hazard Light Button | Double Click | Switch OEM screen to interface screen OR Interface screen to the OEM screen |
| Touch Screen | Touch | Control function |
Intelligent Voice Control
The system supports intelligent voice control, allowing hands-free operation for safer driving. It features more sensitive and extensive voice recognition. You can activate Siri or Google Assistant to play music, make calls, or read messages aloud.
Online Navigation
Use your favorite navigation app directly on the car's screen to go wherever you want. Enjoy the journey with your loved ones.
7. Wireless Connection
The latest technology currently in use is a wireless CarPlay and Android Auto solution that supports audio and video separation. Before using the wireless connection, please pair your device via Bluetooth and ensure that the vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.
7.1 Wireless CarPlay Connection Steps
- Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
- Select the Bluetooth Device name as "CAR Audio_XXXX" and pair.
- When prompted, select "Use CarPlay".
7.2 Wireless Android Auto Connection Steps
- Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
- Select the Bluetooth Device name as "CAR Audio_XXXX" and pair.
- After successful Bluetooth pairing, follow the on-screen Android Auto connection process.
Audio Source
Please check on your iPhone whether the sound source is the original car radio (e.g., Land Rover Bluetooth).
8. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9-16V, 14.4V (rated) |
| Storage Temperature | -30~+85°C |
| Operating Temperature | -30~+75°C |
| Ambient Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption Current | 1A (rated), 3A (Max) |
| Shutdown Current | Current: 300mA (Clock is on) |
| Quiescent Current | less than 3mA |
| Charging Current | ≤2A; when USB charging current >1A, host machine activates circuit protection to control current within 15A to prevent burning. |
| Connectivity | Dual-band WiFi (2.4G/5.8G), Bluetooth 5.0 |
| Display Integration | 8/10.25-inch factory screen |
| Camera Input | 2x RCA inputs (PAL, NTSC formats) |
9. Troubleshooting
9.1 Why will the Box's Bluetooth disconnect?
The working principle of wireless CarPlay involves Bluetooth pairing for device information confirmation, followed by a Wi-Fi connection for data transmission. To avoid interference, the Bluetooth connection will be disconnected. This is a normal phenomenon.
9.2 I cannot connect CarPlay, but Bluetooth is already paired.
Please forget the device's Bluetooth and reset Wi-Fi on your iPhone (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).
9.3 Why is the wireless CarPlay not stable?
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel: Enter the CarPlay box settings, go to Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on the current region.
10. User Tips
- Compatibility Check: Before purchasing or installing, always confirm compatibility with your specific Jaguar/Land Rover model year and screen size (8" or 10.25"). If unsure, provide photos of your center console to technical support.
- Installation Manual: A detailed installation manual is provided. For complex wiring or if you are not experienced with car electronics, professional installation is highly recommended to ensure proper function and avoid damage.
- Android Auto Functionality: Yes, this device will enable Android Auto functionality on your compatible Jaguar/Land Rover screen.
11. Warranty and Support
For any technical issues or support inquiries, please contact techsupport@anyfar.com. Please provide your product model (RM-LX2522F) and a detailed description of the issue for faster assistance.
For the most up-to-date information and support resources, please visit www.anyfar.com.
